Lippert Manual Landing Gear Set with Handle - Weld On - 37" Lift - 6,000 lbs
(49 reviews)
Price: $493.92
Lippert Manual Landing Gear Set with Handle - Weld On - 37" Lift - 6,000 lbs
Item # LC333966
Retail:$727.95
Our Price: $493.92
You Save: $234.03
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (49)
- Q & A (0)
- Photos
Lippert Camper Jacks - LC333966
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Landing Gear
- Sidewind Jack
- 5001 - 6000 lbs
- 2 Jacks
- 37 Inch Lift
- Lippert
- Weld-On
- Steel
This sturdy jack set is specially designed to help level and stabilize your trailer or RV. Drop legs provide an additional 16" of lift. Manual crank handle included.
Features:
- Landing gear set lets you raise and lower your trailer
- Ideal for 5th-wheel trailers and RVs
- Connecting rod allows for simple, tandem operation
- Footplates offer stability and prevent sinking
- Drop legs minimize jacking time and help to level the trailer on uneven ground
- Heavy-gauge steel construction ensures durability and strength
- Durable, black powder coated outer tubes provide excellent corrosion resistance
- Mounting brackets weld onto your trailer, jacks bolt onto brackets with included hardware
- Crank handle is included
Specs:
- Total lift: 37"
- Travel: 21"
- Drop leg: 16"
- Cross shaft length: 41" - 71"
- Handle dimensions: 29-11/16" long x 10-3/16" wide
- Footplate dimensions: 5" long x 7-15/16" wide
- Height of black outer case: 29-1/2" tall
- Combined weight capacity: 6,000 lbs
- 90-Day warranty
- Made in the USA
Note: Landing gear is designed to stabilize a portion of your trailer's weight, not to support the full GVWR of your trailer. Do not use landing gear to lift your trailer or RV during tire changes or service work because doing so will exceed the capacity of the landing legs.
This landing gear set is constructed of powder coated steel to ensure that it will resist rust and corrosion and hold up well against the elements. Each jack has a drop leg that allows the gear to reach the ground faster, saving you time and energy that would have been spent manually cranking. The cross shaft ensures that the jacks raise and lower at the same rate, and it telescopes so that it can fit the width of your trailer. A crank handle is included so that you can engage the landing gear manually.
This set includes everything you need for a smooth installation. The brackets are designed to weld onto your trailer, and the jacks then bolt onto those mounting brackets with the included hardware.
333966 Lippert Components (LCI) Manual Landing Gear Set - 37" Travel - 6,000 lbs
Installation Details
Customer Satisfaction Score:
90% were satisfied with this product
10% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Lippert Manual Landing Gear Set with Handle - Weld On - 37" Lift - 6,000 lbs - LC333966
Average Customer Rating: 4.6 out of 5 stars (49 Customer Reviews)
This sturdy jack set is specially designed to help level and stabilize your trailer or RV. Drop legs provide an additional 16" of lift. Manual crank handle included.by: Andy04/18/2022
I received my new landing gear, and it was what I expected. I have not installed it yet, but after putting a temporary fix on my old unit last year, I'm sure this unit will work. The packaging is not great, I actually thought the gear box that came with was used it was so dirty, but it has no installation marks on it, so I believe it's new. The trucking company used drove off my driveway cracking the edge of the asphalt, so I'm not real excited about that either. Other than those two things, it will work...
by: Brian 04/16/2024
Receved order on time and everything went well during reassembly. Thanks for helpjng me get all the right parts
by: Fred04/22/2021
This was just what I needed. The legs work perfectly. The only reason I gave 4 stars instead of 5, there were pieces missing from the shipment and I had to purchase the missing items from a local hardware store. Also one gear box was locked up and I had to take it apart to find a piece of a wire tie inside blocking the gears. Once the piece of plastic was removed works like a charm. The fast delivery makes up for the slight inconvenience. The legs are holding my 5th wheel up with pride.
by: Richard 03/28/2023
Had some issues with the mounting brackets that were in the trailer. We didn't use the brackets that came with the kit as that would have involved cutting out the old brackets and welding in the brackets that came with the kit. We were able to get the legs installed with minimal effort and the rest of the installation went without any other issues.
by: Rick 07/19/2022
Steve at Etrailer.com did a great job walking me through the all the parts I would need to fix my landing gear. The landing gear went in really easily and looks to be very well made.
by: Barb 08/15/2021
by: Cal03/02/2021
Received the Kit in about four days (5 Stars for etrailer). The shipping container was severely damaged (2 stars for UPS), but at least it arrived. Did not appear any parts were missing. I ordered this kit because it was less expensive for the complete kit then to replace both landing gear legs separately. I left the 5th wheel attached to the truck and removed the old landing gear, gearbox, and motor prior to the arrival of the new system. Keep all your parts. The new kit arrived and was very easy and straight forward to install. However the tubular steel expansion rod that connects both landing gear legs was too short. I had to use the my old connection rod. Also the spacer used for the inside of the large side of the connection rod was not included with the kit. Had to use the old spacer in the old connecting rod. I used my old landing gear foot plates and pull pins on both landing gear leg extensions. Once installed, the kit worked flawlessly. I placed red marker tape on the landing gear extensions so not to top out the legs when lifting. Again save all your old parts.
by: Johnie And?03/23/2024
Super helpful, absolutely. A pleasure to work with will definitely order the rest of my parts through them and nobody else respond time. Was immediately to help me fix the problem and explain it to me. Couldn't ask for better customer service and a company that cares about what you think of the product that they say which was high quality. Honestly got to say they were pleasure and easy to work with I'm 60. Sometimes you can be a little tough using emails. And they actually took the time to call me and talk to me in person and help me throw it so thanks to their team.
by: Edward04/06/2022
I installed the jacks on my 23 ft. 5th wheel trailer, which was very simple and ran the electric wires direct to my battery compartment. The jacks work fine but are a bit too noisy for my liking. Not sure if all are this noisy but they do the job.
by: Stephen08/17/2023
New landing gear for my 2012 Cougar 5th wheel. Delivered on time (box was pretty beat up) all the parts were there and it was a perfect fit! Installed it myself in about 1 1/2 hours
Bonus, it was cheaper than at Amazon.
Highly recommend e
trailer !
by: Verified buyer06/08/2022
This landing gear has worked great. Unfortunately it was a bigger job than we were willing to undertake but luckily found a mobile repair service to install it for us. We have had no problems since then.
by: Harry11/22/2023
I am very impressed with this Landing Gear, it is twice that of the Original equipment, in quality.
by: Andre04/14/2022
Package was very heavy. It was so heavy that ups damaged the box and lost some of the hardware.This should have been sent in at least 2 boxes from the weight of this item.
by: Preston 05/06/2023
Great replacement of landing gear that was no longer working correctly on our ole trailer. Was a pretty simple replacement once logistics of supporting trailer and accessing with generator compartment partially in the way. I no longer have the fear of be able to re-hitch if I need to lower for leveling purposes. Thanks etrailer you guys have been great with all my DIY trailer projects.
by: Zana07/25/2023
It took about a week for me to receive the landing gear. I paid extra for express delivery although I actually received a day later than they said I would by regular delivery. The box was torn up and I was missing some parts but made it work by using some of my old parts. Other than that, everything was okay……at least it fit.
by: Shauna 12/07/2021
Parts arrived promptly and in good condition. Tracking kept us informed about delivery so we could still enjoy camping. Phone assistance was knowledgeable and concise. Will continue to ship etrailer. Thanks!
by: Mark 06/24/2023
Everything was great flawless installat ion
by: Robert04/01/2022
I would give five stars if the product came with instructions and packaged better. Box came like it was taped up by 2 year old. Parts loose and hardware loose. Jacks did work fine.
by: Ernie H11/03/2016
I really can't say a lot about the product quality at this time since I just got it installed. It was (I believe) drop shipped to me from the factory. When I received and installed the land gear assembly it kept binding regardless of if I was raising or lower the landing gear rendering it unusable. I contacted the folks at etrailer and was helped by their technician Wayne H. With his help we were able to discover the problem and that was that the factory sent me two leading landing gear legs instead of a (1) leading leg and one following leg. etrailer sent me a replacement following landing gear leg and I installed it today. Once again the electric landing gears on my 5th wheel worked just like they did when the trailer was new. I will definitely be doing business with etrailer in the future and do recommend them to anyone needing parts for a trailer.
by: Jason 01/26/2023
Installation was straightforward and motor and jacks operate very smoothly
by: James02/07/2019
Purchased for my 2010 Keystone Montana Mountaineer 285 RLD. The original Jack Leg collapsed. I ordered this set to replace the complete Jack Leg System. I upgraded the capacity for added assurance and they fit perfectly. The system runs a little bit slower than the original but that is caused by the different gear ratio for the increased capacity. A few extra seconds of time is an easy trade off for the increased capacity security. A great product from a great company.
by: Michael11/27/2021
The landing gear worked perfectly as a direct replacement to my existing landing gear. One of the legs of the existing landing gear had failed so I decided to replace the entire unit. Everything worked great. Although it wasn’t very difficult to figure out how things were to be put together, there were no installation instructions. It took about two hours of wrench time plus an hour of unpacking, setup, and clean up to replace the entire unit.
by: Kaycee02/09/2023
Product is good, but the packaging is terrible. Box was torn up and taped back up with packing tape. Switch was damaged and not usable as is.
by: Tommy05/18/2020
Not a hard project for someone younger than me. It seems to work and interchange with the old one. I have yet to try the hand crank. I had to jack trailer up in order to work on it with floor jack and blocks. I'm not sure if the hand crank would pick it up. However, I am happy with the product and will get it a full blown test in June 2020 to see if it holds up. I don't expect any problems.
by: Bobby09/04/2022
Had a slight problem with the switch being damaged during shipping but etrailer sent a new one right away. Thanks for the great response!
25
49
Show More Reviews
See what our Experts say about this Lippert Camper Jacks
- Replacement Landing Gear for 2004 Forest River Cedar CreekThank you for the pictures of your setup as based on that we know that the Lippert Manual Landing Gear Set part # LC333966 is a confirmed fit and would work great for a manual setup. Or if you wanted a setup that is powered like what you have now you could use the part # LG-1 which comes with everything new and is exact replacement for what you have now.
view full answer...
- What Trailer Landing Gear Set has Two Bolts on Top of JacksWithout a picture it would be pretty hard to say for certain. But I checked the landing gear sets we offer and the Lippert Manual Landing gear part # LC333966 has a top plate on the jacks that are held on with two bolts/screws.
view full answer...
- Replacement Landing Gear Legs for Venture 900 Landing Gear The correct replacement for your Venture VMC900R RV landing gear are part # LC119102 for the lead leg or # LC119101 for the follow leg. These will be direct replacements for the current legs you've got.
view full answer...
- Replacement Landing Gear for Discontinued RWB Landing Gear on 5th Wheel For replacement 5th wheel landing gear you can use the Lippert Manual Landing Gear Set with Handle # LC333966 or Lippert Electric Landing Gear Set # LC333964. They have a 6,000 lb combined weight capacity, 15-1/2" inner weld stop measurement, and a total lift of 37". There are no direct replacements for RBW landing gear, and nothing that corresponds with those part numbers since their landing gear and parts were discontinued years ago.
view full answer... - Landing Gear Set to Replace Atwood Set on 1998 Excel Peterson with Atwood Landing GearThe landing gear part # RVLG-8HDL would bolt right up to your RV that had Atwood landing gear but since you just bought a Stromberg Carlson motor your best option would be to go with the Lippert manual landing gear set part # LC333966 instead as this also bolts right up to your RV but will allow you to also use the motor you have. The motor you have is not compatible with the # RVLG-8HDL.
view full answer... - Is it Possible to Add an Electric Motor to Landing Gear Jacks on a Horse TrailerSounds like you are looking for a motor to add to your existing landing gear to make them a powered landing gear set. I would have to know what brand of landing gear you have to know for sure what parts you would need. Lippert, Venture and Stromberg Carlson landing gear are the same like part # LC333966. This is a very popular set that can have a motor added to it. You would need the motor kit # LC142178 and switch kit # LG-145236. You can use the same gearbox that comes with the manual...
view full answer... - Recommended Replacement Landing Jack System for 2008 Keystone Montana Mountaineer 345DBQFor your 2008 Keystone Montana Mountaneer 345DBQ, the Lippert Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear # LC178653 and follow leg # LC178652 are a perfect replacement. These parts are exactly what you need for your trailer. If you want the entire replacement kit, you can use the Lippert Manual Landing Gear Set with Handle - Weld On - 37" Lift - 6,000 lbs # LC333966 or electric # LC333964 which will have only one option of weld stops for your trailer. I've attached...
view full answer...
- Lippert Manual to Electric Landing Gear Conversion PartsJeff, it sounds like you have the Lippert Manual Landing Gear Set with Handle # LC333966 and you're wanting to motorize it - In which you can by using your existing gearbox with the Lippert Venture 5th Wheel RV Landing Gear Motor # LC142178 with the switch # LG-145236. If you are looking for a way to convert your landing gear to a dual motor setup then there's really no way to do that without replacing the follow leg with a lead leg, adding a motor and gear box, adding an additional switch...
view full answer... - Replacement for Ventura Landing Gear on 2008 Keystone Cougar 281BHSThanks for the additional information. I was able to determine that the full kit you want is the Lippert # LC333966 replacement landing gear set including the legs and drop feet, cross bar, and gear box. We also have the Lippert # LC333964, which is the same kit, plus the motor and switch.
view full answer... - Replacement Landing Gear Legs for 2012 KZ 2857 Durango with Lipper Landing GearSince your Lippert landing gear jack motor is still good the best way to replace the damaged components would be with a a new manual set part # LC333966 which basically comes with everything but the motor which you could reuse from your current setup.
view full answer... - Are There Still Replacement Bevel Gears for Atwood Landing GearI do have an option for you but Atwood Landing Gear has been discontinued for several years and we don't offer confirmed replacement parts for them. Therefore, your best option would be to replace the entire set with an option like the Lippert Manual Landing Gear Set with Handle part # LC333966. This is a complete setup that comes with everything you need.
view full answer... - Replacement Landing Gear For a 1998 Terry Taurus 5TH Wheel CamperDue to the limited information I could find on your 1988 Terry Taurus 5th wheel it appears the landing gear parts are obsolete. It does appear you will be able to replace your entire system with one like the Lippert Manual Landing Gear Set # LC333966 or you could upgrade to the Ultra-Fab Deluxe Electric Landing Gear Set # UF17-943010. The electric landing gear will allow you to control each side with an individual switch making it easier to level your 5th wheel on uneven ground.
view full answer... - How to Choose 5th Wheel Landing GearI can't find any reference to that part number, but there is still a way to choose replacement 5th wheel landing gear. All you will need to do is measure the distance between the mounting brackets, which should have the standard dimensions of 17-1/2 inches. Then just choose the lift and capacity you need; for example if you need 30 inches of lift and a 6,000 lb capacity go with the Lippert Manual Landing Gear Set with Handle # LC333966. I have added a link below to our entire selection...
view full answer... - Replacement Landing Gear that Could Fit Motor of 2004 Forest River Cedar CreekIf the landing gear set you have on your Forest River is a Bulldog setup the motor of it would fit on the Bulldog # BD500162 but if instead you have the more standard brands of Venture, Stromberg, LCI, or Lippert you'd want the # LC333966.
view full answer... - Can Manual Lippert Landing Gear have Motor AddedMy contact at Lippert Components confirmed that their manual landing gear # LC333966 can indeed be converted to powered operation later on through use of their motor kit # LC142178 and switch kit # LG-145236. You can use the same gearbox that comes with the manual landing gear.
view full answer... - Recommendations for Jacks to Lift a Trailer 28 to 30 InchesRV and trailer scissor jacks such as # UF48-979031 are meant for stabilization purposes but not lifting applications. What I recommend is to use a couple of farm jacks such as # RP7033400 which are meant for lifting. This model has a maximum lift of 42 inches. It will also be easier to use than scissor jacks. But they have to be used manually and each one raised evenly with the others. Another option if you want something permanently attached to the trailer is to use some landing gear...
view full answer... - Landing Gear Set to Replace Lippert Landing Gear on a 2008 Keystone Cougar 5th Wheel TrailerYes. You can use Stromberg Carlson Manual Landing Gear Set - 34-7/8" Lift - 8,000 lbs Item # LG-183708 in place of the Lippert set that you have now. Or you can use Lippert set # LC333964 for an electric set or # LC333966 for a manual set. Or you could save some money and go with # RVLG-8HDL. It will use the same brackets that your Lippert system has. Given the options available I would go with this set if it were me.
view full answer... - How Much Weight Can Landing Gear HoldIt depends on what 5th wheel landing gear you have. For example; the Lippert Landing Gear part # LC333966 is rated for 6,000 lbs. It can be used with a trailer that weighs more than 6,000 lbs because it is only supporting part of that load - the tires, wheels, and axles should be supporting the bulk of the weight. Keep in mind that the pin weight of a 5th wheel trailer is typically 20% of the loaded trailer weight. As long as you are not going over the Gross Vehicle Weight Rating (GVWR)...
view full answer... - Replacement Landing Gear Set Option for Jayco Eagle 5th Wheel TrailerI'm not totally sure what the exact issue is but it sounds like something with the gears inside therefore you'd be better off with a full replacement landing gear set for which we have a couple great options. The Lippert Manual Landing Gear Set part # LC333966 is a manual replacement option and the Lippert Electric Landing Gear Set part # LC333964 is a power replacement option. These both come with their own brackets for installation but so long as your existing match up with the standard...
view full answer... - Will the Lippert Manual Landing Gear Set Work To Replace Atwood Landing GearThe Lippert Manual Landing Gear Set part # LC333966 should work great to replace old Atwood Landing Gear. In order to confirm you simply need to measure the weld stop spacing on the landing gear legs which for the Lippert set is 15-1/2" inside to inside or 17-1/2" outside to outside. This is a standard spacing but so long as they match you'll have a bolt-on fit.
view full answer... - Solution for RBW Fifth Wheel Trailer Landing Gear Needing Replacement PartsRBW landing gear sets haven't been made in a long enough time that replacement parts just aren't available for them. RBW Industries was acquired by AL-KO Kober Corp more than 5 years ago and the fifth wheel-related product lines were discontinued. We DO offer complete manual and electric landing gear sets for 5th wheels that you can see on the linked page. These include kits rated for as much as 8K and include items like the Reese dual-motor electric landing gear kit # RP500708, but kits...
view full answer...
- Recommended Landing gear for my 2009 Denali Camper.The Lippert Manual Landing Gear Set with Handle part # LC333966 is a great choice for your camper. the 6,000 lb. capacity is perfect as it is not lifting the entire 12,200 lbs. but a much smaller portion of that closer to that of your pin weight.
view full answer... - Can a Motor Be Added to Lippert/Venture Landing Gear JacksMy contact at Lippert Components confirmed that their manual landing gear # LC333966 can indeed be converted to powered operation later on through use of their motor kit # LC142178 and switch kit # LG-145236. You can use the same gearbox that comes with the manual landing gear. There would be no need to convert the follow leg to the shaft of a lead leg. Venture and Lippert landing gear brands are the same. If you are looking for a way to convert your landing to a dual motor setup...
view full answer... - Landing Gear Replacement for Keystone Laredo that Allows Reusing MotorIf the brand of landing gear you have now on your Keystone Laredo is a Ram brand then yes you could reuse it's motor with the # RVLG-8HDL. But most likely you have a Lippert set of landing gear based on what typically they used so instead the part # LC333966 would be what you'd want instead so that you could reuse the motor.
view full answer...
Do you have a question about this Camper Jack?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Mike S
Updated by:
Carrie F
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
4/25/2022
I will have our Customer Service team reach out to you