Recommendations for Jacks to Lift a Trailer 28 to 30 Inches
Question:
I built a trailer that will need a jack on the rear so that I can pull the spindle/wheels off trailer. Then the trailer will be lowered to the ground to be used for storm and shade capabilities. The trailer weighs about 3300 lbs and I believe I will need to lift the trailer about 28-30 inches from ground or 0. Will the scissor jack lift something like this from ground up to 28 inches or 30.
asked by: RANDY B
Expert Reply:
RV and trailer scissor jacks such as # UF48-979031 are meant for stabilization purposes but not lifting applications. What I recommend is to use a couple of farm jacks such as # RP7033400 which are meant for lifting. This model has a maximum lift of 42 inches. It will also be easier to use than scissor jacks. But they have to be used manually and each one raised evenly with the others.
Another option if you want something permanently attached to the trailer is to use some landing gear such as # LC333966. This type of system is found on 5th wheel trailers. This model is rated for 6,000 pounds at has 37 inches of lift.
Products Referenced in This Question
Lippert Manual Landing Gear Set with Handle - Weld On - 37" Lift - 6,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Steel
- 5001 - 6000 lbs
- Landing Gear
- Sidewind Jack
- 37 Inch Lift
- Weld-On
- 2 Jacks
- Lippert
more information >
Reese Towpower Farm Jack - 42" Lift - 7,000 lbs
- Automotive Tools
- Jacks and Jack Stands
- Farm Jack
- 7000 Lbs
- Reese
more information >
Product Page this Question was Asked From
Ultra-Fab Ultra Scissor Jacks - 30" Lift - 13,000 lbs - Qty 2
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 10001 lbs or More
- Scissor Jack
- 30 Inch Lift
- Bolt-On
- Weld-On
- 2 Jacks
- Ultra-Fab Products
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Solution for Ram OEM TPMS Not Fitting Aluminum Wheels
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
- Q&A: Can The ARK Drop Down Corner RV Stabilizer Jacks # ARK94FR Be Bolted On?
- Q&A: Wiring Diagram for Lippert Stabilizer Jack # LC298707
- Q&A: Adding Stabilization Jacks To Fifth Wheel Trailer That Uses Lippert 3.0 Ground Control
- Q&A: Are Weight Limits Combined or Per Jack for Stabilizing Scissor Jack
- Q&A: Do Tow Hooks Need Removed for Curt Front Hitch on 2022 GMC Sierra 2500
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: How Long Can You Boondock in an RV?
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop