Replacement Landing Gear for 2004 Forest River Cedar Creek

Question

Question:

Hello, I need to replace the landing gear on my 5th wheel and am not sure which one to order. On 6/20/2020 I ordered a replacement gearbox from you. Order # . Can you please advise on which landing gear I need for my 5th wheel? Please let me know if you need further information. Thank you,

asked by: Ann

0

Expert Reply:

Thank you for the pictures of your setup as based on that we know that the Lippert Manual Landing Gear Set part # LC333966 is a confirmed fit and would work great for a manual setup. Or if you wanted a setup that is powered like what you have now you could use the part # LG-1 which comes with everything new and is exact replacement for what you have now.

expert reply by: Jameson C

0

Landing Gear Leg
(click to enlarge)

Gear Box and Motor
(click to enlarge)

Landing Gear Switch
(click to enlarge)

Answer 1

If the landing gear set you have on your Forest River is a Bulldog setup the motor of it would fit on the Bulldog #BD500162 but if instead you have the more standard brands of Venture, Stromberg, LCI, or Lippert you'd want the #LC333966.

view full answer...

Answer 2

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 3

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 6

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 9

If you think the cause for the noise on your 2015 Jayco Whitehawk 24RBS tandem-axle travel trailer is from the normal travel of the suspension components (leaf springs, equalizers and shackle straps), you might switch over to wet bolts. The squeaking…

view full answer...

Answer 10

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 11

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 12

The most similar trailer clearance lights we offer to replace the PM150 lights you have now would be the Thinline LED light part #AL91RB. For a replacement harness that would plug into this you'd need the part #A46PB and then for a grmmet part…

view full answer...

Replacement Landing Gear for 2004 Forest River Cedar Creek

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching