Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily disconnect this 4-way flat trailer-end plug from your vehicle without damaging the terminals. Large grip ring provides maximum leverage when disconnecting. Harness splices into your trailer's wiring. Durable cable covering resists damage.
Features:
Specs:
Standard 4-way flat plugs have a small surface area to grip when you are pulling them apart, forcing you to wriggle the plugs back and forth to loosen them. Some users even pull on the wires. This can lead to broken terminals or ripped wiring. With the Easy-Pull harness, the plug has a large grip ring designed to make disconnecting a snap. Simply slide your finger into the ring and pull the plug away from the opposite plug to disconnect.
The Easy-Pull is also available as a vehicle-end 4-way flat plug. Combine the Easy-Pull trailer-end plug and vehicle-end plug for the easiest possible disconnection. With ring handles on both connectors, disconnecting is as simple as gripping the rings and pulling straight apart. No wriggling, no broken terminals, and no damaged wires.
California residents: click here
Average Customer Rating: 4.7 out of 5 stars (114 Customer Reviews)
Easily disconnect this 4-way flat trailer-end plug from your vehicle without damaging the terminals. Large grip ring provides maximum leverage when disconnecting. Harness splices into your trailer's wiring. Durable cable covering resists damage.Love this connector! I have rheumatoid arthritis so my hands aren't as strong as I'd like and I have trouble with regular 4-flat connectors. I can get a good grip through the pull loop on this and get the leverage I need to take connect and disconnect.
Perfect for my utility trailers with a 4 pole plug.
The parking lights did not work after installation. Tested with multimeter found a short in the brown wire. A cheap product would not recommend.
The harness connected well with the other components and the plug mates easily when hooking up the trailer with the tow vehicle.
Great product, hope it last a long time, the old wires were getting a bit worn out. I really like the loop to make it easier to unplug without putting too much strain on the connector.
Andrew
5/22/2023
It did well for a while, but within a few months, the pins began bending from just the weight of the small flap on my Ram pickup that covers the 4-pin connector. I switched to using a big 7-pin to 4-pin adapter and it lasted a couple more years. This weekend, it finally gave up the ghost and one of the pins came off in the adapter. I was able to fish it out and wired up an old plug I had stashed away just in case. Im trying to decide if I should buy another, but am not too sure I want to spend so much for something that will need to be replaced as often as a $2 plug!
Really like the heavier construction jacket and pull ring since it will be installed on a snowmobile trailer.
Exactly what I wanted! Fast delievery!
Absolute hot garbage. Arrived defective and never worked. A complete waste of money. If i could give zero stars i would. For $20 for a 4 pin plug you would think they test them before shipping.
Jenny N.
4/29/2023
Goodness me! This 4 pin connector does have a 3 year warranty. I will have our Customer Service team reach out to you.
The wiring was just what I needed and the shipping was quick. I will definitely be using etrailer more in the future.
The Hopkins 4 way trailer wire connector is very well designed and manufactured. It is enough of an improvement over a standard connector that I recommend replacement of an undamaged standard connector.
Allows for easy insertion and removal without pulling on harness. Works great!
So much easier to use with the large pull handle. Great for use when your Trucks harness is in a tough to reach place
Michael
5/30/2022
Still a great harness. Very durable
Norwood
8/1/2022
excellent
This is a great product, solid and great quality. Three things that would help the consumer. First thing would be to add solder-less connectors. Next thing would be to have about 6-8” of exposed wire to work with when coupling. And last thing would be to furnish a dust cover for the plug end.
Ted
9/14/2020
I couldn’t be any more happy. It has held up to many fishing trips on my boat trailer, great!
Nice solid, molded grab handle. I’m switching all my 4 wire trailers over to these harness. Well made
Ray C.
7/16/2021
Have not had one issue in the year since I installed them. A+. Worth the extra cost
This is a great solution to a 4 wire plug for my trailer! Regular 4 wire plugs tend to fatigue over time. This rugged design is sure to last many years
Not as durable as I thought it would be. I like the open hole design for easy plugging and removing, but the connection pins to the assembly themselves are subpar. I have a folding tongue and secured this onto a holder, when closing the arm, it folded the pins downward. After realizing the interference, i moved it to an upward position to allow for clearance but the damage was done. The pins bent and are now loose. Had to replace the entire harness.
This connector is much more robust than standard flat pigtails. I particularly like the sheathed cable rather than the exposed flat four-wire.
Kenneth
9/24/2021
Working perfectly. The hole pull works far better than yanking on the wire leads when disconnecting
Part as described and will meet my needs
Love the finger loop. Next time I need to replace my trailer light plug this will be my choice.
Kenneth
9/6/2019
Excellently. Love the ring!
Exactly what I wanted. Excellent quality. Couldn’t find it anywhere. Etrailer had it !
Reese
8/7/2022
Still working as new.
A real upgrade to typical 4 wire trailer connectors. If you are doing any trailer wiring I strongly recommend this replacement.
Well made with an integrated cover like a outdoor extension cable the ring makes it easy to hold when inserting or removing the connection from your vehicle.
It would be perfect if it came with the very fine cover that Hopkins includes with most other variations of the "ring" style connector.
very heavy duty trailer pigtail cable. This is what I need to prevent kinks and breaks in the wiring harness. Nothing like hooking up trailer lights that dont work because the wiring is easily damaged.
exactly as pictured, quick delivery
Heavy Duty Trailer plug for my boat trailer! Fast shipping!
Thanks
Well made unit that makes it easier to connect and remove from tow vehicle. Lead is 48" long but would be better if a little longer, maybe 60 or 72" to facilitate connection to tow vehicles with extended hitches or trailers with long tongues. Would be fantastic if the monitor/test lights were included on connector.
Do you have a question about this Trailer Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Brooke M.
9/25/2023
I will have our customer service team reach out to you about this. Thanks for letting us know!