License Plate Bracket Needed for 23x47 Carpod Walled Cargo Carrier
Question:
I have a 2017 Itasca Navion RV. This will obscure the license plate. Do you have a suggestion for mounting the plate on the rear of this holder?
asked by: Robert K
Helpful Expert Reply:
We do have license plate brackets like part # LP10SB that you could use to move your license plate so it sits behind the 23x47 Carpod Walled Cargo Carrier # M2205-2201. If you plan on driving at night time you should make sure to have a bracket with a light like part # PM436B. If you go this route then you will also need a wiring harness like part # HM38134 (you will connect the wire from the light to the brown wire and then cap off the additional wires for this application). Butt connectors like part # DW05744-5 are needed to connect your wiring.
Mounting the bracket can be a bit tricky as you don't have much wall space on that carrier. You could potentially secure it with zip ties but I'm not sure how durable that will be.
Products Referenced in This Question
Deka Heat Shrink Butt Connector - 16-14 Gauge - Nylon Insulation - Blue - Qty 5
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Hopkins Endurance Easy-Pull Harness w/ 4-Pole Flat Connector - Trailer End - Jacketed - 48"
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 0 - 5 Feet Long
- Plug and Lead
- 4 Flat
- Hopkins
more information >
Trailer License Plate Mount Bracket, Angled, Rust Proof Polymer - Black
- Accessories and Parts
- License Plates and Frames
- Mounting Hardware
- Brackets
- Optronics
more information >
Peterson License Plate Light w/ Steel Mounting Bracket - Incandescent - Gray Housing - Clear Lens
- Trailer Lights
- License Plate Lights
- Rectangle
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 8-7/8L x 2-7/8W Inch
- White
- Peterson
more information >
Product Page this Question was Asked From
23x47 Carpod Walled Cargo Carrier w/ Lid - 2" Hitches - Steel - Folding - 450 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Folding Carrier
- 24 Inch Wide
- Standard Duty
- Fits 2 Inch Hitch
- 48 Inch Long
- Class III
- Class IV
- Steel
- Carpod
more information >
Continue Researching
- Shop: 23x47 Carpod Walled Cargo Carrier w/ Lid - 2" Hitches - Steel - Folding - 450 lbs
- Video: Malone Anti-Rattle HitchLock System Review
- Video: Review of Trimax Locks Padlocks - 3 Stainless Steel Padlocks with Shielded Shackles - TMX48ZR
- Video: Carpod Walled Cargo Carrier with Lid Review M2205-2201
- Video: Carpod Walled Cargo Carrier with Lid Review
- Video: Carpod Cargo Carrier with Sidewalls Review
- Search Results: pad lock
- Shop: etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Shop: Malone Anti-Rattle HitchLock System
- Shop: 23x47 Carpod Walled Cargo Carrier for 2" Hitches - Steel - 450 lbs
- Shop: 23x47 Carpod Walled Cargo Carrier w/ Lid - 2" Hitches - Steel - 450 lbs
- Shop: Curt Trailer Hitch Receiver Lock - 2" and 2-1/2" Hitches - Stainless Steel
- Shop: Trimax Stainless Steel Padlocks with 3/8" Shielded Shackle - Qty 3
- Q&A: Does Carpod Hitch Carrier Rattle in Hitch
- Video: Trailer Hitch Installation - 2016 Ram ProMaster 2500 - Curt
- Video: Best 2018 Volkswagen Atlas Trailer Hitch Options
- Shop: Vehicle Sway Bars
- Shop: Trunk Bike Rack
- Shop: Trailer Hitch
- Search Results: bike racks
- Search Results: dry boxes
- Article: Trailer Hitch Installation Tips
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: cargo carrier
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Measure for Trailer Hitch Drop
- Search Results: hitch lock
- Search Results: hitch cargo carrier