Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW

See what our Experts say about this Fastway Accessories and Parts

• What is the Fastway e2 Weight Distribution Shank # FA92-02-4100 Constructed Out Of?
  The Fastway e2 Weight Distribution Shank # FA92-02-4100 is constructed of solid steel bar stock.
  view full answer...
• Dimension Of Fastway e2 Weight Distribution Shank
  The distance from the center of the hitch pin hole to the adjustment holes on the vertical part of part # FA92-02-4100 is 8 inches. I have attached a photo of the shank with the dimensions noted. The # FA92-02-4100 shank would offer the shortest distance from the center of the hitch pin hole to the adjustment holes. It is rated for 1,200-lbs tongue weight has features 6-1/4 inches rise to 2-1/4 inch drop.
  view full answer...
  
• Replacement Shank for 1,000 lb/10,000 lb Fastway e2 Weight Distribution System
  The shank that comes with the Fastway e2 weight distribution systems rated for 1,000 lbs/10,000 lbs is part # FA92-02-4100. This shank does use the industry standard 1-1/4" adjustments so if you're needing something a little longer or taller I'm linking our selection of replacement weight distribution shanks for you to filter through.
  view full answer...
• Replacement Shank for Weight Distribution System Needing More Height
  Your weight distribution system uses a Shank # FA92-02-4100 that gives you a maximum 6-1/4" of rise and 2-1/4" of drop. I recommend using the Fastway Shank # FA92-02-4214. This will give you up to 10" of rise and 7-1/4" of drop with your round bar hitch system.
  view full answer...
  
• Solution for a Shank on a Equal-i-zer WDS That Drags When Backing Up
  Yes, using a shorter shank for your WDS would eliminate the dragging you're experiencing. To get you set up, I'd need to know the current length of your shank, the tongue weight of the shank, and approximately how much shorter you'd wager it'd need to be. For instance, if you had the Fastway e2 Weight Distribution Shank # FA92-02-4214 you'd definitely see a benefit in your situation if you used the Fastway e2 Weight Distribution Shank # FA92-02-4100.
  view full answer...
• Will Curt Weight Distribution Shank Work with Fastway E2 Weight Distribution System FA92-02-4100
  Yes, the Curt weight distribution shank part # 17120 is a fit with the Fastway E2 WD system part # FA92-02-4100 that you referenced. Thankfully nearly all of the weight distribution system manufacturers made their head and shank dimensions similar.
  view full answer...
• Hitch Pin Hole to Ball Hole Dimension on Fastway e2 Weight Distribution System FA92-00-0600
  On the Fastway e2 Weight Distribution System # FA92-00-0600 the distance from the hitch pin hole on the shank to the ball hole on the head assembly is 12-inches, according to my contact at Fastway. The shank that is included in this system, part # FA92-02-4100, measures 8-inches from it's hitch pin hole to the head mounting holes on the vertical portion. Overall length is 12-inches.
  view full answer...
• Is my 12,000 lb EAZ Lift Weight Distribution System Overrated For my 4600 lb Trailer
  I researched the EAZ lift 12,000 lb weight distribution system and the tongue weight rating range is between 1,001 to 1,200 lbs. The tongue weight of your trailer rated for 4600 lb will not be 1001 lbs even when loaded. This could cause a stiff or rough ride with the lighter trailer if you use the EAZ lift weight distribution because the tension in the spring bars is designed for a heavier trailer. I recommend getting a lower rated weight distribution for the 4600 lb trailer such as The...
  view full answer...
• Shank That Comes With 600 lb Fastway e2 Weight Distribution FA92-00-0600
  The shank that comes with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 is indeed the 4100; it is the following part number: - Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW # FA92-02-4100
  view full answer...
• Compatibility of Replacement Shanks with Fastway e2 Hitch 92-00-0450
  I reached out to Fastway and they verified that you can use the Shank # FA92-02-4100 with your Fastway e2 Weight Distribution # FA92-00-0450. Their site shows it with the heavier 6K-12K hitches as that is what that hitch comes with. The Shank 92-02-4116 that comes with your hitch is only available with the entire kit. If you are needing a shank with more drop the Fastway e2 Weight Distribution Shank # FA92-02-4214 gives you 5-1/2" of drop compared to only 1/2" drop with the other shanks.
  view full answer...
• Will The Reese Weight Distribution Head 58333 Work With A Fastway Shank
  Yes, you absolutely can use a shank like the Fastway e2 Weight Distribution Shank # FA92-02-4100 with the Reese Weight Distribution Head # RP58167. Weight distribution shanks are more or less interchangeable, in that the vertical hole spacing is 1-1/4" and they all fit into a 2" wide channel on the back of the head.
  view full answer...
• Troubleshooting Weight Distribution Shank Option to Replace Odd Size
  I haven't heard of any weight distribution system with a 1-3/4 inch shank and there isn't an adapter. If the shank at the end where the head attaches will accept a 2 inch width and has the standard 1-1/4 inch on center adjustment increments then a replacement shank is an option, but if not you have an anchor or you will require a custom fabricated shank. My recommendation for a replacement shank is the Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs...
  view full answer...
• Correct Shank for 7 Drop with Fastway e2 Weight Distribution Round Bar System
  Even though your weight distribution (WD) shank (I believe is part # FA92-02-4100) has about a 6-1/2" drop, since drop/rise is measured to the trailer coupler (the ball mount platform basically) this means that the max drop of a WD shank won't equal the max rise of the shank when it is inverted due to head assembly installing with 2 bolts. To achieve a true 7" max drop you would have to disregard the bottom bolt for the head unit and only use the top bolt hole of the head unit # FA94-00-1033...
  view full answer...
• Adding a Second Weight Distribution Head and Shank for a Fastway Weight Distribution System
  Yes, we do have a head only that will work great for you. It is the replacement Fastway e2 head # FA92-02-1255 for 6K to 12K rated systems or # FA92-02-0410 for the 4.5K system. This head is the exact same as the ones that come in the full kits. You would have to use a Fastway head in order to use the Fastway spring bars. Another brand head will not work. You will also need replacement hardware kit # FA92-02-9600 since the above heads do not include this hardware. For a second shank we...
  view full answer...
• Can Shank of Fastway e2 Weight Distribution System be Used in Rise and Drop Position
  Yes, the shank of the Fastway e2 Weight Distribution System # FA94-00-1061 can be used either direction for rise or drop. The replacement shank is part # FA92-02-4100.
  view full answer...
• Fastway Weight Distribution for a V-Nose Trailer with Limited Space on Frame
  With a trailer weighing 3,820 pounds the tongue weight will be in the neighborhood of 380 to 573 pounds which is 10 to 15 percent of the gross trailer weight. But to that you also need to add in the weight of anything loaded behind the rear axle of the tow vehicle. So for example if you had 100 pounds of gear behind the tow vehicle rear axle that would make the tongue weight 480 to 673 pounds. The minimum tongue weight for the Fastway system, # FA94-00-1033, to be effective is 400 pounds....
  view full answer...
• Weight Distribution Shank Recommendation for Fastway System to Fit 2-1/2 inch Hitch
  Yes, because all of the weight distribution companies make their heads to fit the same shank dimensions you can use a different brand shank with your system. For that we have the Eqaul-i-zer shank part # EQ90-02-4900 which fits the 2-1/2 inch hitch size you have, provides up to a 6 inch drop, and works with your Fastway kit. Oddly enough this shank is made by same company as who makes Fastway since Equal-i-zer makes both brands. I attached a review video for this for you to check out too.
  view full answer...
• Weight Distribution Shank for a 2-1/2" Hitch That is Compatible with a Fastway e2 System
  We do have a 2-1/2" shank that you can use for your Fastway e2, but there is not one specifically from Fastway. The Equal-i-zer Weight Dist Shank # EQ90-02-4700 will fit in a 2-1/2" hitch and has comparable specs as the Fastway e2 Weight Distribution Shank # FA92-02-4100. The # EQ90-02-4700 is 12" long with a 7" rise and 3" drop. If you are needing a different rise or drop distance, please let me know what you need and I would be happy to recommend the best 2-1/2" shank for your Fastway...
  view full answer...
• Can Fastway Weight Distribution Shank be Used with Equal-i-zer Weight Distribution
  Yes, the Fastway shank part # FA92-02-4100 that you referenced is compatible with all of the Equal-i-zer weight distribution systems including your # EQ37120ET. Fastway and Equal-i-zer are actually made by the same company but the shanks of most WD systems are all interchangeable between brands.
  view full answer...
• Recommended Longer Weight Distribution Shank To Allow Door Clearance On 2016 Ford Transit
  I recommend the Curt weight Distribution Shank, part # C17122. This shank measures 18 inches overall and 14-inches from the center of the hitch pin hole to the attachment holes for the head. This shank has a 15,000-lb weight capacity and this shank has an overall height of 10-inches. I have attached a photo of this shank with the dimensions shown you can check out. Another shank you may want to check out is the Curt # 17120. This shank has a 15,000-lb weight capacity and measures 10-inches...
  view full answer...
  
• Replacement Head for Fastway E2 Round Bar Weight Distribution System
  It sounds like you are missing the head, hitch ball, and shank. We do have those parts avialable for replacement. You will want the Replacement Head for Fastway e2 Weight Distribution Systems - Round Bar # FA94-02-1055, Replacement Hardware Kit for Fastway e2 Weight Distribution Head - Round and Trunnion Bar # FA92-02-9600, and Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW # FA92-02-4100. For you hitch ball you will either use the 2" Hitch Ball...
  view full answer...
• Are The Trunnion Spring Bars Of A Fastway E2 Weight Distribution Hitch Interchangeable
  The trunnion head # FA92-02-1255 for your Fastway e2 Weight Distribution w/ 2-Point Sway Control # FA92-00-0800 is the same one used on the 6,000-lb, 8,000-lb, 10,000-lb, or 12,000-lb systems so you can just swap out your spring bars for part # FA92-02-1299 and trunnions with part # FA92-02-1244 to increase the capacity of the hitch. You'll just want to doublecheck that your shank and hitch ball are rated for 12,000lbs as well. If not you can use part # FA92-02-4100 for the shank and...
  view full answer...
• Carrying A Golf Cart In A 2018 Nissan Titan XD Diesel And Towing A 2020 Forest River Grey Wolf 29TE
  Per the Nissan Titan brochure for 2018, the Nissan Titan XD Diesel 4x4 crew cab has a 2,080lb maximum payload. Golf carts are about 1,000lbs usually and are typically right at 8 feet in length. If your truck bed is 8 feet you will have most likely right at 30 percent of the golf cart's weight as 300lbs of additional tongue weight. To determine if your golf cart is pushing you over the limits use the GCWR of your Titan (can be found on the sticker on your driver's side door jamb), subtract...
  view full answer...
• Replacement Head and Shank for Fastway e2 Weight Distribution Hitch
  The answer to your question depends on the brand of the bars and hardware. Since you were looking at Fastway I'm assuming you have the bars for the Fastway e2 Weight Distribution # FA94-00-1061. If that is the case, you can use the following replacement parts to complete the system: -Fastway e2 Weight Distribution Shank # FA92-02-4100 -Replacement Head for Fastway e2 Weight Distribution Systems # FA94-02-1055 -Replacement Hardware Kit for Fastway e2 Weight Distribution Head # FA92-02-9600 If...
  view full answer...

Do you have a question about this Accessories and Part?