Is my 12,000 lb EAZ Lift Weight Distribution System Overrated For my 4600 lb Trailer
Question:
I just bought a 20foot trailer with a gross weight of 4600 lbs and i have a eaz lift sway hitch rated for 12000 lbs. Can i use this hitch for this trailer
asked by: Kevin
Expert Reply:
I researched the EAZ lift 12,000 lb weight distribution system and the tongue weight rating range is between 1,001 to 1,200 lbs. The tongue weight of your trailer rated for 4600 lb will not be 1001 lbs even when loaded. This could cause a stiff or rough ride with the lighter trailer if you use the EAZ lift weight distribution because the tension in the spring bars is designed for a heavier trailer.
I recommend getting a lower rated weight distribution for the 4600 lb trailer such as The Fastway e2 system part # FA92-00-0600. This particular weight distribution system is rated for lighter trailers with a tongue weight between 250 lbs and 600 lbs. This weight distribution system will work well for your trailer if it's loaded to full capacity or empty. It includes 2-point sway control but does not include a shank. You should be able to use the same shank from the EAZ lift system as long as the holes measure a 3/4 inch in diameter and are 1-1/4 inches apart. If your EAZ lift shank does not measure to these specs, you need Fastway E2 weight distribution shank part # FA92-02-4100.
You may be able to contact EAZ lift and replace the spring bars on your system for a lower rated bar. The only issue with that is the weight distribution head may be designed for the diameter round bar that you have on the setup. The diameter of spring bars of certain manufacturers may be smaller for the lower rated bars.
Products Referenced in This Question
Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- e2
- Round - 4 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 6 Inch Rise
- Fastway
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 6-1/2" Rise, 4" Drop - 1,200 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Shop: Fastway e2 Weight Distribution Shank - 12" Long - 7-3/4" Rise, 5-1/4" Drop - 1.2K TW
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 4,000 lbs GTW, 400 lbs TW
- Shop: Mighty Cord Replacement Hardwire RV Plug - 30 Amp Female
- Shop: MB Sturgis Propane Pigtail w/ Back Check - RV Type 1 x 1/4" Male NPT - 1-5/8'
- Shop: Propane Hose with Back Check - Type 1 x 1/4" Male Inverted Flare - 15"
- Shop: RV Exterior Lighting
- Search Results: 2.5" receiver hitch
- Search Results: faucet
- Search Results: 2.5 inch receiver
- Search Results: rv porch light
- Search Results: equalizer weight distribution hitch
- Search Results: e2 hitch
- Search Results: rv interior light
- Shop: RV Covers
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Video: Choosing the Right Brake Controller
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Video: B&W Continuum Weight Distribution System Review
- Article: 5 Things to Know About Weight Distribution Hitches
on Weight Distribution Hitch
