Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Magnet kit with green wire allows you to replace the worn out magnet on 10" trailer brakes, rather than having to replace the entire assembly. The oval design increases the efficiency while also extending the life of the magnet.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're gonna take a look at the replacement trailer brake magnet kit for Dexter and Hayes Alcove 10 inch trailer brakes. This magnet kit will allow you to replace the worn out magnet on your 10 inch trailer brakes, helps you save money and time, because it's better than having to replace the whole brake assembly. This part is designed to work with the following 3500 pound axle brake assemblies. It fits the Dexter 10 inch by 2 1/2 inch brake assemblies, part number 23-26 and 23-27. It fits the Dexter 10 inch by 2 1/4 inch never adjust brake assemblies, part number 23-468 and 23-469, and the Hayes Alcove 10 inch by 2 1/2 inch brake assembly, part number 60202803 and 60202703. As you can see here, it has a nice oval magnet design it.
This increases the efficiency of your brakes and will help extend the life. The sleeve, right here, you'll notice, this will protect the wires from any abrasion. That's the part that goes through the backing plates so if there's any movement you don't want those wires to be cut into. Now, it does the two wires connected so they do need to be connected when you install this. One goes to your brake feed, one goes to a ground, and they're both green wires, so either wire can be used for either function. This part includes everything shown here on the table, the magnet itself, the two springs, and the hold down clip.
A few dimensions on the magnet, just to give you the length of it, from one end to the other is right at 3 5/8 inches long. It's going to be 2 1/8 inches wide, and the overall height of it is right at about 7/8 inches tall. That should do it for the review on the placement trailer brake magnet kit for Dexter and Hayes Alcove 10 inch trailer brakes.
Average Customer Rating: 4.8 out of 5 stars (98 Customer Reviews)
Magnet kit with green wire allows you to replace the worn out magnet on 10" trailer brakes, rather than having to replace the entire assembly. The oval design increases the efficiency while also extending the life of the magnet.
Perfect replacement
All 3 items I ordered have worked as expected. It is great you had everything in stock. This makes choosing ETrailer my first choice.
i ordered an electric brake controller, and it worked perfectly. It came in the time frame as ordered, and was exactly what I had ordered. I took it to a repair shop and the mechanics installed it and, voila, I had brakes!
It was a well done discription and info.. When I got the part it was exactly what I thought. Came real quick and works perfect.
Exact replacement for what I originally had, slipped right on and into place.
Easy to install and work great!
Works well!
Great customer service and great experience!
Had some difficulty installing until I figured out that removing the entire brake assembly including the backing plate allows bench top installation vs trying to install on the trailer. The magnet works as expected and I now have four wheel brakes instead of three!
My AL-KO axle has the text "AL KO 08 05" stamped into the brake shoes in the hub with 10x2.25 brakes and 4.5 inch bolt circle.
Its not exactly the same as the original AL-KO magnet on my trailer - but from all I could tell a perfect fit. The lead wires are plenty long to reach outside the hub before splicing.
This magnet is just what I needed to replace the magnet who's wires wire sheared off at the backing plate when a tire failed. The reasonable price was nice too!
Still working. It is almost never the magnet that wears, but the wires inside the drum that always seem to wear thru and short on some moving part. Trailer brakes what can I say, the design is an after thought. Like when the cable guy runs the wire in your house...
I bought 4 brake magnets for the RV and they work great. The original magnets each drew different ohm numbers. Two would lock up . I replaced them with your magnets and it brakes consistently every time now. A real easy job too.
Service was great and part was as described. After replacing these it did not solve my brake problem. It was a short in the wire going through the axel. Check that first if your brakes are not working. I replaced the wire an all was good.
Bought a new second had trailer.
Wasn't sure of the axle make and model.
Stripped out the bearings and found the grease seals rubber lip very hard.
Called E Trailer and Phyllis was excellent in working with me to identify the correct seals but with a double lip.
Ordered and received very smoothly-- as promised.
I am going top fit them tomorrow but have already offered up the OD to the hub and the ID to the spindle and I know that I have the correct seals.
Seals look to be good quality and I expect them to be fine.
Product was good. I was bummed to find out after I purchased these that I could have purchased and entire electronic brake assembly with magnets and brake pads i for not too much more :( My bad for not doing a little more searching before purchasing.
I would never give a review, I have always felt it was a waste of time and I never thought it mattered. I have changed my mind. I ordered some parts for my trailer from an competitor, only because I went to the first site i found on my web search. I was given a good product and I cant complain about their service. What I want you to know that when I had to buy some more parts to complete my project, I had a friend recommend this site, not only did they beat the price on the same parts, I was given great CUSTOMER SERVICE. I ordered the parts and received an email to make sure I was happy with my order and if I wasn't, I should call them and they would make it right. In this day and age, I'm all about spending my money with those that will care about my business transactions with them. If they don't show me that they care about me. I simply wont spend my money with them again, and I would never recommend them to anyone. I was extremely happy to spend my money with these guys, as I like when a business follows up with me when I buy their product. I had a larger order that came in two packages. One package arrived a day before I expected. I called about the remaining package, thinking they messed up my order. I spoke with a very nice lady that explained that the other package was due to be delivered on time and that if it wasn't there when I expected, I could call back and they would handle it. I love it when a business that I spend my money want to make sure I'm satisfied with their service. That very Idea of customer service makes me a customer for life.
At a sale price cheaper than a no name locally sourced magnet, the savings was a no brainer. The shipping was fast and communication from etrailer is top notch. The product itself is good quality, pig tail plenty long to splice wherever is convenient, the spring is actually larger in diameter and stiffer than OEM which I count as a plus. It pays to do business with etrailer, you WILL be satisfied with your experience.
Excellent
the grease was used on the trailer, it looks good but only miles will tell.
I am very happy with the service and phone call from the company. The call was to clarify my order. This is five orders over a few years.
Product arrived as scheduled great packaging, I installed both new brake magnets and now trailer brakes are both working as they should which should help spare my truck brakes with the extra help.
I found etrailer's website easy to navigate and customer service was excellent for an online company. The parts that I purchased fit perfectly. I used youtube to watch the installation video that etrailer put up. Will use them again. All the parts fit as they should and the job went smoothly.
Easy to install. Perfect fit. The only recommendation I would make to etrailer.com would be to include the grommet where the wires exit the brake housing. The old grommets were damaged and not serviceable.
Parts were received early...quicker than expected. Customer service is great, very helpful and friendly. Got the right part, waiting for decent weather to install new parts. Etrailers is the only place I buy my parts, also refer my friends and relatives. Great place to buy from, Thanks again.
Every item I ordered worked and fit exactly as I had hoped it would. Prices and shipping was top notch and will definitely buy from e-trailer again.
Item received quickly and easily installed. Only problem was that a part that should be included, the strain relief bushing, is not . This small item is specifically mentioned in the installation instructions as a must replace component and proved impossible to procure locally.
Magnets are installed and brakes are now working fine. The Q&A on your website was particularly useful in this instance because there was some question as to which part number would be the right one for my application. Etrailer offers more than just parts! Thanks, Etrailer!
solved an issue we had with our horse trailer when pulled with our F350 on a trailer connection warning.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dalton B.
11/16/2020
Im not sure. I traded that trailer in on a new bigger one, so I cant comment for sure, but it was working perfectly when I traded it in.