Brophy Mounting Bracket for 4-Pole Flat Trailer Connector
(401 reviews)
Price: $15.63
In Stock
Brophy Mounting Bracket for 4-Pole Flat Trailer Connector
Item # BK4F
Our Price: $15.63
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (401)
- Q & A (0)
- Videos (1)
- Photos
Brophy Accessories and Parts - BK4F
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- Brophy
Bracket for 4-way flat trailer connector mounts to your trailer hitch or vehicle bumper and provides a sturdy, fixed location to easily connect your trailer wiring.
Features:
- Bracket mounts to your trailer hitch or bumper to provide a sturdy location to hold your 4-pole flat trailer wiring connector
- Hardware not included
- Black color
Specs:
- Opening dimensions: 1-5/16" long x 1/2" tall
- Distance between mounting holes: 1-3/4"
BK4F Brophy 4-Way Flat Mounting Bracket
Compare to Tow Ready 118149
Video of Brophy Mounting Bracket for 4-Pole Flat Trailer Connector
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Mounting Bracket for 4-Pole Flat Trailer Connector Review
Today, you're going to be taking a look at the Brophy mounting bracket for four-pole flat trailer connectors. That's going to be part number BK4F.So here's what our four-pole bracket's going to look like once we have it installed. It's going to allow us to have our four-pole wiring right by our hitch. That way whenever we get ready to tow, we can plug right up. This is going to be a lot better solution to secure our wire rather than just hanging it on our hitch or securing it to our safety chain connection point because we don't have to worry about our wires hanging down and possibly getting damaged.Our bracket is going to work with most four-pole standards plugs, and even if we remove the dust cap, you can see it's not going to fall back in even if we have to really push to plug in our trailer. Installing it is going to be as simple as putting two bolts in and running your four-pole connection through the bracket.
Let's show you how to do that now.Our four-pole bracket is going to have two holes on it, so we can either mount it to our hitch or another bracket so we can put our wiring in place. Keep in mind that our bracket's not going to come with any hardware, but if you are using a short or long bracket, there will be hardware with that kit. So I'm going to drop down my hardware from on top of the bracket. I'll line up the hole in my four-pole bracket, and I'll do that for the other hole as well. Then I'll come back and tighten up all the hardware.Now, you just want to take the dust cap off your four-pole, and coming from the back side, we'll push it through.
You just want to make sure that you push it in far enough that the tabs on there are going to catch. This will prevent it from going back in. I'm just going to have to work it back and forth a little bit. Then we can tie up any of the excess wires behind the hitch, and we can even put a little bit of electrical tape to hide the color on the back of our car.That'll finish up your look at the Brophy mounting bracket for four-pole flat trailer connectors, part number BK4F.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
Brophy Mounting Bracket for 4-Pole Flat Trailer Connector - BK4F
Average Customer Rating: 4.6 out of 5 stars (399 Customer Reviews)
Bracket for 4-way flat trailer connector mounts to your trailer hitch or vehicle bumper and provides a sturdy, fixed location to easily connect your trailer wiring.by: Russ 04/24/2024
Just what I wanted. This bracket is a perfect fit for my trailer hitch receiver. Bracket installs very easily and keeps the 4-pin connector looking nice and neat without having it hang below the bracket or bumper.
by: Mark 04/14/2024
All 3 items arrived together and on schedule. The only reason I do not give the purchase 5 stars is because the wiring harness had to be modified to work with my car. If I didn’t go to a trailer repair company, the wiring may still not be on the car.
by: Don 05/06/2024
Delivery was fast and on time as promised! Installation videos and instructions were spot on. Would highly recommend!
by: Douglas 04/10/2024
Easy to install and works great to keep the wiring harness from dragging.
by: Craig02/20/2024
Mounted fine to bumper, but does not hold harness at all.
by: Andrew 04/23/2024
Works like a charm. Highly recommend etrailer.com A+++++++
by: Steven 04/16/2024
Easy to install and etrailer was very helpful finding the right parts.
by: Alan 04/18/2024
It is fine but did come with any mounting hardware.
by: Craig05/09/2024
Couldn’t have been much easier. Remove the plastic cover under the left rear of the vehicle (3 push pins and 2 14mm plastic nuts), remove the cap on the factory harness, plug in the new harness and secure the wires as you see fit. There’s no instructions for wire storage or how to route them, but it’s very simple - use common sense - plenty of YouTubes.
by: Michael07/13/2022
Seemed cheap (Thin metal) but works well with the harness kit. I bought this because NOBODY makes a aftermarket flange mount flat plug only trailer plug in.
Michael
7/14/2023
little oxidation on the pins. a little sanding and dielectric grease and alls well.
by: Allen07/05/2021
Simple but effective means to hold connector. I taped everything for more secure and professional looking mounting.
Allen
7/5/2022
Just fine! Not a complicated device!
by: Dale 04/27/2024
Have been doing business with these guys for a while now, they are the best. Good products and excellent customer service. Every time I have a product question, whoever I am talking to knows their products well.
by: Al04/29/2024
Easy to install as depicted in video.
by: Luis 05/07/2024
Great bracket quality for the price.
by: SteveW09/17/2023
Instalation was pretty quick and easy, the completed installation worked great on my new trailer.
by: Carl04/02/2024
Very good customer relations and fast service.
Thank you Carl Cole
by: Kevin06/08/2023
Installed on Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long on to Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" worked great just what I needed!!
by: James 08/03/2023
Bracket is well made however it was very difficult to get my 4 prong plug in the bracket properly. Actually had to open the slot abit just to get started. With all that being said the finish product looks great. Not sure this bracket if this bracket was supposed to be a good fit
by: Ronald03/04/2024
Perfect, sturdy and good fit.
by: Robert 05/02/2024
Good quality
by: Doug 04/23/2024
Works well.
by: Brian06/11/2023
Did not fit T-One Vehicle Wiring Harness with Upgraded Circuit Protected ModuLite HD Module - 4-Way Flat
Item # 118781
by: James 08/15/2023
I would have liked to have gotten fasteners with this product. But it works good.
by: Mark07/19/2023
This probably works fine but I can't tell just yet. The mounting screws don't come with this so now I have to go and buy some.
by: Michael 03/18/2024
Fits perfect
25
400
Show More Reviews
See what our Experts say about this Brophy Accessories and Parts
- Recommended Highest Capacity Hitch for a 2023 Ford EdgeThe highest capacity hitch for your 2023 Ford Edge is going to be the Draw-Tite Trailer Hitch item # 75234. This hitch is custom fit and bolts to your Ford with included hardware. It fits all models of the 2023 Edge. The Draw-Tite item # 75234 is a class III hitch with a 2" receiver that weighs 35 lbs. It has a 4,500 lbs towing capacity, and a 675 lbs maximum tongue weight. It is also compatible with a weight distribution system. I really like this hitch because the cross tube mounts...
view full answer...
- How to Add Additional 4-Way Connection to a 2022 Ford F-350 Super DutyI've got a quick and easy solution for you with the Curt T-Connector Vehicle Wiring Harness # C55384. This tees in behind your current 4-Way/7-Way using the US CAR connection and gives you an additional 4-Way that you'll be able to use the same time your 7-Way is being used. I recommend picking up the Brophy Mounting Bracket # BK4F and N-Drill Mounting Bracket # 18136 so the additional 4-Way can be held in a place that has easy access.
view full answer... - Recommended Trailer Hitch Receiver and Wiring Harness For a 2021 Jeep Grand Cherokee Laredo XFor your 2021 Jeep Grand Cherokee Laredo X I recommend using the etrailer Trailer Hitch Receiver # e98901. This receiver will fit below the stock fascia and does not require any cutouts or replacement fascia's to be installed. I have linked an installation video below for this receiver so you can see the installation process. The T-One Vehicle Wiring Harness # 118727 will allow you to install a 4-way flat connector. You can the Mounting Brackets # 18140 & # BK4F to secure the 4-way to...
view full answer... - Correct 2018 Chevy Equinox Premier Diesel T-One Vehicle Wiring HarnessThe T-One Vehicle Wiring Harness # 118759 is exactly what you need for your 2018 Chevy Equinox Premier - Diesel! I also recommend picking up the mounting brackets # BK4F and # 18140 so the 4-Way connector is readily located next to your hitch receiver as opposed to having to dig it out of the cargo area and drape it over your bumper when you need to use it.
view full answer... - Correct Trailer Wiring Harness for 2012 Ford Escape Without Factory Tow PackageWe have the exact trailer wiring harness you need for your 2012 Ford Escape without the factory tow package. The best option for your vehicle is the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118551. This harness is the best for your Escape because it has the highest amp rating among wiring harnesses for your vehicle, so it gives you the best prevention against potential shorts. We have also found the Tekonsha brand to be the most consistently reliable wiring...
view full answer... - Curt Wiring Harness For 2020 Chevrolet Equinox With Factory Tow PackageYes, the Curt T-Connector Vehicle Wiring Harness # C56375 will fit your 2020 Chevrolet Equinox with the factory tow package, or if it has the plug at the back of the car. We can only base what is confirmed to fit either by what we have installed ourselves or the information that the manufacturer gives us. Fortunately I have installed tons of wiring kits on the Chevy Equinox and I can confidently let you know that so long as you have the plug behind the bumper it will work. It's extremely...
view full answer... - 2013 Ford Escape Trailer Wiring Recommendation for Trailer LightsThe 2013 Ford Escape wiring you need to activate your trailer lights is the Curt T-Connector # C56335. This tees in behind your tail lights and then draws power directly from your vehicle battery via the lead wire (see attached install video). I also recommend picking up the mounting brackets # BK4F and # 18140 so your connector is readily accessible when you need it!
view full answer... - Will the Curt Powered Tail Light Converter # C59236 Fit a 2022 BMW X3? Yes, the Curt Powered Tail Light Converter # C59236 will fit on your 2022 BMW X3. If you are worried about splicing into the wires we do have the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT which uses sensors placed over the tail light wiring. These sensors detect when power is going through the wiring to activate the 4-way wiring. You will want a Mounting Bracket # BK4F if you plan on mounting the 4-way near your receiver rather than running it through the rear hatch when needed.
view full answer... - Feeding T-One Vehicle Wiring Harness Through Floor Pan and Mounting to HitchYou have the Class III Draw-Tite Max-Frame Trailer Hitch Receiver, 76192 on your 2018 Volkswagen Tiguan, this has an integrated mounting point for a 4-pole flat trailer connector. I suggest the Brophy bracket, # BK4F. Simply install the T-One Vehicle Wiring Harness, # 118811 per included instructions and then put the 4-way flat plug through an existing opening in the floor pan of your Tiguan. There will be multiple holes in the pan with grommets, plugs. Pull one of these and feed the...
view full answer... - How to Determine Correct Weight Rating for a 2021 Chevy Blazer 3.6L V6The standard 2021 Chevy Blazer 3.6L V6 is rated for 1,500 lbs towing. The only way you can have the higher 4,500 lbs towing capacity is if you have the FWD with VR2 or the AWD with V92 option. If you aren't sure on that then your best bet is to reach out to your local Chevy dealer with your VIN to see exactly what you have on your vehicle. I got the towing information from the online owner's manual from the Chevy site. If you don't already have the parts needed to tow a trailer then I...
view full answer... - Recommended Mounting Bracket for Attaching a 4-Flat Vehicle Connector to a Hitch We have a couple of options for mounting a 4-flat connector to your Tacoma's hitch. If you have a Draw-Tite hitch with the built in tab all you will need is the Mounting Bracket for 4-Pole Flat Trailer Connector item # BK4F. This attaches in the pre-drilled slots. If you have a hitch with a round or square crossbar you will need the No-Drill Mount for Electrical Mounting Bracket item # 18140 and the item # BK4F.
view full answer... - Wiring Recommendation for a 2023 Kia Sorento Without a Tow PackageThe Curt Trailer Hitch Receiver # C34ER is a great choice for your 2023 Kia Sorento and I recommend picking up the Tekonsha 4-Way wiring to add to your vehicle: - T-One Vehicle Wiring Harness # TK26FR This wiring simply tees into your factory plugs behind the tail lights on your vehicle and then pulls power from the included power lead. I also recommend securing the 4-Way next to your hitch receiver by using the brackets # C57202 and # BK4F.
view full answer... - Recommended Trailer Wiring For 2021 Jeep Grand CherokeeI recommend the Tekonsha T-One Vehicle Wiring Harness, # 118727 for your 2021 Jeep Grand Cherokee. This custom-fit T-One connector simply plugs into your vehicle's OEM wiring harness that is located behind the tail lights. Then run a hot lead up to your Jeep's battery and connect the lead to the included fuse holder. Then connect the fuse holder to the positive terminal on your battery and insert the provided fuse. We even have an installation video produced showing all these steps on...
view full answer...
- How to Carry a Heavy Kayak with the 2022 Chrysler PacificaTo transport a kayak with your 2022 Chrysler Pacifica we'll need to get you a trailer hitch so you can tow a roof rack on wheels since there currently (as of May 2023) aren't any roof rack options for your vehicle aside from what it comes from the factory with, and even that isn't compatible with the Hullavator. For the trailer hitch I recommend the Curt Trailer Hitch Receiver # C65CR because it has a 2" receiver and hidden crosstube. Then for wiring you need the T-One # TK96FR along with...
view full answer... - Does the Curt C13284 Hitch Fit a 2023 Mazda CX-9?According to Curt the Item # C13284 hitch you were looking at stopped fitting the CX-9's after the 2022 model year. The correct hitch for your 2023 Mazda CX-9 is the Draw-Tite item # 76020. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight. This hitch can be used with weight distribution systems but that will not increase its capacity. I have linked...
view full answer... - Recommended Trailer Wiring For 2020 Jeep Grand Cherokee Without Tow PackageFor your 2020 Jeep Grand Cherokee I recommend the Tekonsha T-One Vehicle Wiring Harness part # 118727. It's custom made for your Jeep and it gives you a 4 way flat trailer connector so you have all the lights to tow a trailer safely and legally. It gives you your tail light functions, turn signals, and brake lights. The wiring installs behind your tail lights and plugs inline between the factory connector and the light assembly. There is no cutting or splicing of the factory wires, however...
view full answer...
- 2023 Ford Bronco Wildtrak Trailer Hitch and Wiring RecommendationsSince flat tow wiring is designed to receive a signal and trailer wiring harnesses are designed to send a signal you will need a second wiring harness on your 2023 Ford Bronco Wildtrak, but it will be a style that tees in so it will fit with the Curt flat tow wiring. Here are the parts I recommend installing on your Bronco: - Draw-Tite Max-Frame Trailer Hitch Receiver # DT37GR - Curt Wiring # C42WR (for 4-Way flat) OR Tekonsha Wiring # TK55VR (for 7-Way) - Wiring Bracket # BK4F (for...
view full answer... - Will Brophy 4-Way Bracket BK4F Work with 4-Way of Tekonsha Kit 118422Yes, the Brophy 4-way mounting bracket part # BK4F is compatible with the 4-way that comes with the # 118422. The Brophy bracket will also bolt up to the no drill mount bracket # 18140 you referenced as well.
view full answer... - Does the Draw-Tite 76555 Trailer Hitch Fit a 2023 Hyundai Santa Cruz?Yes, the Draw-Tite Trailer Hitch item # DT48GR does fit the 2023 Hyundai Santa Cruz. We have a different part number but it is the exact same hitch. This hitch is custom fit and bolts to your Hyundai with included hardware. The Draw-Tite Trailer Hitch item # DT48GR is a class III hitch, with a 2" receiver, that weighs 40 lbs. It has a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. It can not be used with a weight distribution system. This hitch is made in the USA. I really...
view full answer...
- Best Hitch Curt or Draw-Tite for a 2023 Hyundai Santa CruzThe Curt Trailer Hitch item # C23WR and the Draw-Tite Hitch item # DT48GR are almost identical and are both confirmed to fit the 2023 Hyundai Santa Cruz. The main differences between the two hitches are that the Curt is made in the USA and the Draw-Tite has a built in tab to mount a 4-way or 7-way wiring bracket. Both hitches are a class III, with a 2" receiver, that weigh right at 40 lbs. They have a 5,000 lbs towing capacity, and a 750 lbs maximum tongue weight. Neither one of them...
view full answer...
- Recommended Hitch and Wiring Harness for a 2023 Honda Odyssey The Draw-Tite Trailer Hitch item # 76171 you referenced would be a great choice for your 2023 Odyssey. This hitch is custom fit and bolts to your Honda with included hardware. To attach the Curt T-Connector Vehicle Wiring Harness item # C56382 to the Draw-Tite hitch you will need the Mounting Bracket for 4-Pole Flat Trailer Connector item # BK4F. None of the 4-way wiring harnesses for any vehicle include this bracket. To round out your towing setup I recommend the Curt Towing Starter...
view full answer... - Recommended OEM Style Hitch for a 2019 Jeep Cherokee TrailhawkYes, we do have the OEM style hitch for your 2019 Jeep Cherokee Trailhawk. It is the Draw-Tite Hitch item # DT28MR. This hitch is custom fit and bolts to your Jeep with included hardware. I really like this hitch because of the reasons you said, it installs behind your rear bumper cover and can be completely hidden when you are not towing. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity, and a 650 lbs maximum tongue weight. It can be used with a weight...
view full answer...
- Best Trailer Hitch and Wiring for a 2023 Toyota Highlander XLEThe best hitch for your 2023 Toyota Highlander XLE is the etrailer Trailer Hitch Receiver # e75ZR because it has the hidden crosstube and the matte black finish. I've had two of our hitches installed on my own vehicles and I really like the look of the matte black finish, but it also does a better job at hiding any nicks or dings that can happen from road debris like rocks. Then for wiring you just need to know if your Highlander has the tow package or not. If you aren't sure you can...
view full answer...
- Recommended 4-Way Bracket and Trailer Hitch for a 2015 Honda CR-VTo attach a 4-way wiring harness to the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75742 you will want to use the Mounting Bracket for 4-Pole Flat Trailer Connector item # BK4F. This bracket will attach to the pre drilled tab on the Draw-Tite hitch. None of the 4-way wiring harnesses for any vehicle include this bracket. I have linked a review video below along with a picture so you can see what this bracket looks like when installed. The Draw-Tite Max-Frame Trailer Hitch Receiver...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Chris R
Written by:
Amanda M
Video by:
Jonathan Y
Installed by:
Robert C
Updated by:
Manda E
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
2/27/2024
That is kind of a bummer. Sometimes the bracket can be just a little too big and harness a little too small enough to make it not work. What I recommend is to use electrical tape to thicken up the four flat connector so that it stays in place.