Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch
(72 reviews)
Price: $11.90
In Stock
Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch
Item # C58001
Retail:$30.02
Our Price: $11.90
You Save: 60%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (72)
- Q & A (0)
- Photos
CURT Accessories and Parts - C58001
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- CURT
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. No drilling required.
Features:
- Electrical bracket lets you mount your trailer connector to your hitch quickly and easily
- Holds (1) 4-way or 5-way flat connector
- Fits 2" x 2" trailer hitch receivers
- Sturdy steel construction is long-lasting
- Black powder coat finish resists corrosion
- Notched design allows for access to pin and clip or hitch lock
- Fast, simple, no-drill installation
- Fit bracket over hitch receiver opening and secure around lip with included hardware
Specs:
- Overall dimensions: 6-1/8" wide x 3-1/4" tall x 1-1/8" deep
- Diameter of mounting hole: 1-3/4"
58001 Curt Easy Mount Electrical Bracket for 2" Trailer Hitches - 4-Flat or 5-Flat Plugs
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch - C58001
Average Customer Rating: 4.8 out of 5 stars (72 Customer Reviews)
Attach this electrical bracket to your 2" trailer hitch to make mounting your trailer connector (sold separately) fast and easy. Use with either a 4-way or 5-way flat connector. No drilling required.by: Chris03/05/2024
Ahh I absolutely love this product! I actually reached out to etrailer asking about running the trailer wiring not out of the trunk and I was recommended this bracket. Super easy to install. The directions recommended bending the lower flange to make a tighter fit around the hitch. Blah. I did this initially and I didn’t like the way it fit because it kind of bowed out. I straightened it back out and added a spacer. The spacer is great in my opinion. Once tightened down they made for a perfect fit. Super easy to use. Great product. Love the more flush look of the pin. Way to go!
by: Jim B.06/20/2019
The bracket fit the receiver hitch and keeps the electrical plug from dragging or coming loose. When I tightened the lower retainer, the flat 4-prong plug was loose. As I re-tightened the retainer mounting bolts, it (the end of the retainer) began to bend slightly. See attached pic. Using a heavier or stronger gage metal will prevent this bending. Overall, I still give it 5 stars as I have had no problems with the plug falling onto the ground. Properly tightened, it holds the plug. I would recommend this product to everyone who has had a wiring plug falling onto the ground and being dragged drag on the ground
by: Ron05/16/2021
Great product to complement new electrical wiring for my hitch. It holds the wire securely in place for when it’s needed.
by: Steve04/23/2018
Works great! Install was simple. Now the flat connector doesn't dangle :)
by: David 06/23/2023
Not much to say. Seems to be heavy gauge/well made, but I have not installed it yet as I am thinking I may just keep the wiring inside the cargo area for now. Perhaps I will use it if I do a long towing trip or tow more frequently. Seems nice.
by: Robert01/22/2023
My hitch and accessories arrived at my doorstep 40 hours after being ordered.
This is quite a miracle to travel probably almost half way across the country.
Everything was shipped immediately after ordering and arrived in perfect order.
Outstanding Service and at a reasonable price. Great work Noah!
by: Ed09/20/2018
Good product but not for the (75579) Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III on a Town & Country. Because the hitch fits tight against the bumper this does not fit. I was in a time crunch to travel, so I kept it and made it work by bending it and pushing the bumper up so I could slide it on the hitch.
by: Richard W04/23/2018
I purchased the Curt trailer wiring harness about 2 yrs ago. I didn't like having it running out the back hatch. I use my trailer a lot. I purchased the Curt 58001 mounting brkt. I reviewed the wiring install video and saw the grommet that you normally use for the power line to the harness from the battery. Now I had the hole to run the trailer connector wiring thru with out make another hole and having to splice the connector wiring.
I cut a slot in the middle of the grommet for the wire and then continued to cut the grommet so I could slip the wire to the center of the grommet, put on some liquid electrical tape and ran the wire to the bracket. As waterproof as original. Mounting bracket made a nice, practical connection point. I greatly appreciate your videos and etrailer is my go to source.
by: Rob 07/04/2020
Easy install, very tidy. Only time will tell how well this survives New England winters, but nice simple solution for exterior wiring.
Trivial omissions from manufacturer's writeup (both became obvious ten seconds into installation):
1. This bracket can only be installed at the very end of the receiver tube, not at some arbitrary point along the receiver tube.
2. The spacers are for the receiver tube, not the wiring.
A rubber receiver tube cover will hold the bracket in place while one attaches the mounting hardware.
by: bertman10/06/2017
Fits as stated and seems to be good quality. Installs in about 5 minutes
Even if the nuts loosen over time the part won't fall off unless the bolts completely fall out.
by: Eric F12/15/2016
The mount bracket is a great way to finish the hitch project; includes a hard mounting point for the light assembly from the vehicle. The hard mounting point makes attaching/detaching the male/female ends of the light cables a snap. The bracket has been on my vehicle for a year without any issues.
by: Morgan A.09/09/2018
Perfect solution for conveniently & safely mounting trailer wiring for a 2" hitch receiver! Very quick & easy to mount, solid, and helps keep wiring above safety chains. I looked at several other mounts that are clamped to the receiver, but this is much easier.
by: Matthew10/07/2018
I already recommended this to all of my family. It's great having your wiring harness fixed in one place. It makes plugging in easy, but it will also save your wiring from the stress of the road. I didn't want any rattling on the road so I cut some vinyl tube to fit over one of the carriage bolts. I could vinyl both bolts on one receiver and only one carriage bolt on the other, so use as you see fit.
by: Donald10/05/2019
I just installed the hitch and wiring harness today(Saturday). I thought I followed the video to the T but my car lights didn’t work. I called and they told me it would be Monday. I was disappointed but understood. Three hours later I get a call and they walked me thru my mistake. What great customer service this was my third purchase and if I need more they will get my business!
by: Jonathan11/28/2020
I've been blown away by every Curt product I've bought. This one didn't disappoint. The metal is heavy and strong, the powder coat is thick and indestructible, the fasteners are stainless and exactly right, and the product itself is a great solution to the problem of mounting the trailer electrical connector.
by: Gary 05/30/2023
Easy to install. Told the local Uhaul dealer they should carry them!
by: Raymond04/12/2018
Easy to install, and the nice black paint is a great improvement, as it covers the 2" receiver (which no longer looked new). We're glad to have the wiring secured, and not dangling behind the car (a black Lexus RX-350).
by: Patrick03/20/2018
Fits great on Curt hitch w/ 2" receiver and makes installation look like it was done by a professional!
by: Christopher07/19/2018
When trying to put on the hitch. The hitch weld part is to wide for the bracket. And also it will not work on a traverse. Will be covered up by the plastic
by: Mark03/06/2018
Simple installation. Product fit with very little issue. Would recommend to anyone who has loose trailer wire and plug hanging from vehicle.
by: Bryant09/01/2019
Cleanly finished off the installation of a new hitch and provides a solid mount for the electrical connection. Works perfectly!
by: Larry07/10/2019
Very simple and straightforward solution to my need to secure wiring harness on my SUV. Easy to install.
by: David 10/30/2021
Nice no loose wires moving all the time
David
10/31/2022
Still works and looks good
by: Andy D.02/21/2017
I used one of these on my last vehicle and it was perfect. It kept the harness in easy reach and out of the way.
25
72
Show More Reviews
See what our Experts say about this CURT Accessories and Parts
- Will 4-Way Connector of Wiring Harness # 118538 Fit Curt 4-Way Bracket # C58001Yes, the 4-way connector of the T-One kit part # 118538 that you referenced will fit the 4-way bracket of the Curt Easy Mount Bracket # C58001 that you also referenced since this bracket essentially fits all standard 4 and 5-ways.
view full answer...
- Best Mounting Bracket for a 4-Flat Trailer ConnectorThe etrailer Trailer Hitch Receiver item # e98835 you have has a unique mounting method. To attach a bracket to hold your wiring harness you will need the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch item # C58001. This bracket connects directly to the receiver portion of your hitch and does not require any drilling. The design of this bracket keeps your wiring harness up and out of the way of your safety chains.
view full answer... - Recommended Class III Trailer Hitch Receiver and 4-Way Wiring For a 2021 Subaru Forester LimitedIt sounds like you are looking for a Class III receiver for your 2021 Subaru Forester Limited. For that I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76271. This receiver is rated for a maximum of 525lbs tongue weight and 3,500lbs total trailer weight. Be sure to not exceed any towing capacities given by Subaru for your specific Forester. You can use a weight distribution hitch with this receiver for the heavier loads to keep your Subaru level when towing. I recommend the...
view full answer... - Best Trailer Hitch Receiver and 4-Way Wiring Harness For a 2021 Volkswagen AtlasFor your 2021 Volkswagen Atlas I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76176. This will only fit all trims with the exception of the Cross Sport. This is a class III receiver that has a 2" opening with a maximum tongue weight rating of 900lbs and maximum trailer towing capacity of 6,000lbs. Be sure to not exceed the maximum tow rating given by Volkswagen for your Atlas. The Tekonsha T-One Vehicle Wiring Harness # 118754 is the wiring harness that I recommend using...
view full answer... - What Additional Steps Are Required For Installation Of The Curt Receiver # 13707 on Dual Exhaust?The Curt Trailer Hitch Receiver # 13707 only requires modification to the passenger side exhaust bracket on 2003 and later models with dual exhaust. You will not have to modify the exhaust on your 1997 Mercury Grand Marquis. If you had a 2003 or later model the passenger side exhaust hanger is removed before installing the receiver. Then it is reversed and attached with the additional 5/16" hardware included in the kit after the receiver has been installed. I do recommend installing...
view full answer... - Can 2024 Subaru Outback Wagon Curt T-Connector 4-Way Be Ran Under the VehicleIt makes perfect sense, and I completely agree with you Chris! The wiring manufacturers tell people to drape it over the tailgate as a simple solution, but the clean look and readily available access makes mounting the 4-Way connector next to your hitch receiver much more desirable. It looks like some of our other customers have been able to find a hole under the spare tire to route the Curt T-Connector 4-Way # C56040 through so that's what I recommend checking out on your 2024 Subaru...
view full answer... - Curt Trailer Hitch Receiver For a 2023 Hyundai PalisadeWe do have the Curt Trailer Hitch Receiver # C13427 which is confirmed to fit your 2023 Hyundai Palisade. For the wiring you will need the Upgraded Heavy Duty ModuLite Circuit Protected Vehicle Wiring Harness # C59496. Hyundai removed the factory style connector used on previous years from models which do not have the factory tow package. This ModuLite will allow you to tie into the tail light wiring to add a 4-way flat connector. The Curt Mounting Bracket # C58001 will allow you to secure...
view full answer... - Does The Curt Trailer Hitch Receiver Require Any Modifications To Install On a 2022 Honda Passport? The Curt Trailer Hitch Receiver # C13421 requires no drilling or trimming of your fascia to install the receiver. The receiver simply bolts to the frame using the included hardware. I recommend installing the Curt T-Connector Vehicle Wiring Harness # C56291 with the receiver. This harness will connect to your factory wiring and includes the fuses needed to activate the factory tow package. If you prefer to route the 4-way connector out of the rear compartment permanently you can use the...
view full answer... - Recommended 2" Trailer Hitch Receiver With The Most Ground Clearance For 2018 Mazda CX-5Out of all of the 2" trailer hitch receivers offered for your 2018 Mazda CX-5 I recommend the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98902 as it offers the most ground clearance. When we installed this on a CX-5 we found that from the ground to the top inside edge of the receiver tube opening is 13-1/2" as shown in the included picture. Since your CX-5 already has a 4-way connector, you can use the Curt Easy Mount Bracket for 4- or 5-Way Flat...
view full answer...
- Factory Connector Location On a 2022 Subaru Outback Wagon For Installing Tekonsha 4-Way HarnessThe factory connector for the Tekonsha T-One Vehicle Wiring Harness # 118467 is located under the rear trim panel on the passenger side, just inside the rear storage compartment on your 2022 Subaru Forester. We have a video of the installation process that I have linked below that will help you through the entire installation process. A Trim Pad Remover Tool # ALL648544 will help you to safely remove the rear trim panel to access the connector. If you would rather route your 4-way outside...
view full answer... - How To Attach 4-way Connector To etrailer Trailer Hitch Receiver e98848 On 2018 Honda CR-VTo attach your OEM trailer connector to the etrailer Trailer Hitch Receiver # e98848 you are thinking about installing on your 2018 Honda CR-V I recommend the Curt Easy Mount Bracket for 4- or 5-Way Flat Trailer Connector - 2" Hitch # C58001 which will mount the 4-way connector to the receiver itself. The # 18140 you mentioned would not work due to the crosstube being hidden behind the bumper, and having underbody trim in the way. I included a video of the products mentioned being installed...
view full answer... - Best 4-Way Trailer Wiring Harness For a 2022 Honda OdysseyI recommend installing the Tekonsha T-One Vehicle Wiring Harness # 118781 on your 2022 Honda Odyssey when you install the etrailer Trailer Hitch Receiver # e98855. The Tekonsha harness will plug into the factory connector already on your Odyssey in the rear compartment. When not in use you can bundle the wiring and store in the side storage compartment. Most will prefer to route the harness out the vehicle and leave it near the receiver. If you prefer to do this I recommend using the Curt...
view full answer... - 4-Way Flat Trailer Wiring For a 2008 Infiniti FX35The ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT will provide you a 4-way connector for your 2008 Infiniti FX35. This harness uses sensors to detect current in the wiring rather than having to splice into the wiring or put any additional strain on the factory wiring. You will be able to attach the connector to the end of your Receiver # 13558 using a Mounting Bracket # C58001.
view full answer... - Recommendations For Mounting A Trailer Wiring Harness To A 2016 Honda OdysseyWith how the Draw-Tite # 76025 installs on your 2016 Honda Odyssey, it will be a little tricky getting a permanent mounting location for the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat # 118521. This does not mean it is impossible though and I do have a couple options for you to take a look at below. First will be the Tow Ready Mounting Bracket 4-Pole Flat # 18144. The only problem with this is that with the hitch being almost completely hidden, you will need to drill in to...
view full answer... - 4-Way Mounting Bracket Recommendation for Draw Tite Hitch on 2017 Jeep Wrangler UnlimitedThe Draw Tite hitch # DT78MR that you referenced is a great option for carrying a bike rack with your 2017 Jeep Wrangler Unlimited. The longer hitch tube allows racks to fit easier since it helps it clear the spare tire easier. You can then easily use the Curt Mount Bracket part # C58001 to mount a 4-way to the hitch tube. Check out the install picture I attached for more info.
view full answer...
- Recommended 4-Way Flat Vehicle Wiring Harness For a 2022 Honda CR-VI recommend the Tekonsha T-One Vehicle Wiring Harness # 118741 for your 2022 Honda CR-V. This will connect to the factory connector already found inside your CR-V. I have linked a installation video for a similar 2021 model year that you can reference for installing the harness. This harness is designed to just route out the rear hatch door when needed but if you prefer to run it outside the vehicle I recommend using the Curt Easy Mount Bracket # C58001 to secure the harness to the end...
view full answer... - 4-way Connector Mounting Hardware RecommendationI agree with you that it might be just a bit too tight to install the Curt Easy Mounting Bracket # C58001 on your Jeep Wrangler's Curt Trailer Hitch # 13432. Instead, I suggest using a 4-Pole Mounting Bracket # 18144 with a No-Drill Mount Bracket # C57202. The mount bracket will attach to the bumper beam on your Wrangler, and the 4-pole bracket will attach to the mount bracket. The mount bracket can be flattened for installation, if needed, to gain clearance of the rear bumper. I have...
view full answer... - How to Mount 4-Way Connector with Curt Trailer Hitch # 13432 on a 2016 Jeep WranglerThere are a few different options for storing the Curt T-Connector # C55124 on your 2016 Jeep Wrangler. The first couple of options are exactly what you mentioned, you can let it hang there or zip-tie it, but either of these options don't look that great. We do have the mounting bracket # 18144 which can be mounted to the body of your Wrangler but I believe you are looking for something like the Easy Mount Bracket # C58001 which basically clamps around the receiver of your Curt Receiver...
view full answer... - Recommended Trailer Hitch Receiver and 4-Way Wiring For a 2021 Volkswagen AtlasI recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76176 for your 2022 Volkswagen Atlas. This receiver has a hidden cross tube for a clean look and 2" receiver to work with a variety of ball mounts and hitch mounted accessories. It has a maximum tongue weight rating of 900lbs and trailer rating of 6,000lbs with or without a weight distribution hitch. Be sure to not exceed the maximum weight rating for your Atlas given by VW. The Tekonsha Draw-Tite Max-Frame Trailer Hitch Receiver...
view full answer... - Replacing 1-1/4" Trailer Hitch Receiver For 2" On a 2011 Subaru Outback WagonMy recommendation is for the Draw-Tite Max-Frame Trailer Hitch Receiver # 76227. This style hitch will work well for your 2011 Subaru Outback Wagon. I prefer it over the Curt # C13410 as it has the gussets in between the receiver and cross tube that provide additional strength. And as you have already noticed it looks a lot better than the Draw-Tite # 75673. While I can never recommend towing over your maximum vehicle weight rating I would like to point out that all 3 of these receivers...
view full answer...
- Recommended 4-Way Flat Wiring Harness For a 2016 Ford Transit Van T150The Curt T-Connector Vehicle Wiring Harness # C56327 is the 4-way flat trailer connector I recommend using for your 2016 Ford Transit Van T150. This is custom fit for your Transit and will connect to your factory lights using OE style connectors. A Curt Easy Mount Bracket # C58001 will allow you to secure the 4-way to the end of a receiver hitch like the etrailer Receiver # e98842. This will protect your connector from dragging on the ground while still being easily accessible.
view full answer... - Recommended 4-Pole Wiring Harness and Mounting Bracket for 2016 Hyundai TucsonThe two 4-pole wiring harness kits offered for your 2016 Hyundai Tucson, Curt # C56348 and Tow Ready # 118501, will have an identical installation procedure, but I recommend the Curt since it saves you a few bucks and has a higher current output. This higher output simply means less chance for the trailer lights' power demands from overloading the harness and blowing the included fuse. I have linked an installation video and help article that will show you the entire installation process. If...
view full answer... - Best Trailer Hitch Receiver and 4-Way Wiring Harness For a 2022 Acura MDXI recommend the Curt Trailer Hitch Receiver # C22HR as the best receiver for your 2022 Acura MDX. This receiver has a hidden cross tube with a design that does not require you to have to trim the rear fascia on your MDX. That will make it much easier for the at home DIY installer to fit the receiver. The Vehicle Wiring Harness # C59236 will give you a 4-way flat connector. The Curt Easy Mount Bracket # C58001 will provide you with a secure mounting point for the 4-way that does not require...
view full answer... - External Mounting Bracket for 4-Pole Trailer Connector on Curt Wiring Harness C56158Curt 2-inch Class III hitch # C13119 and 4-pole wiring harness # C56158 are both confirmed fits for your 2014 Honda CRV. For a mounting bracket for your 4-pole trailer connector you can use part # C58001, Curt's Easy Mount Bracket for 2-inch hitches. This bracket mounts to the hitch so you do NOT have to drill holes into your bumper. Please note some customers do prefer NOT using an exterior mounting bracket. By keeping the connector inside the vehicle's rear cargo area when not needed,...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Video by:
Dustin K
Installed by:
Cole B
Installed by:
David F
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ed
1/13/2020
No issue, the way I had to bend it for it to fit has work out fine, and no issues with the bumper even though it pushes the bumper up a little.