Recommended 4-Way Bracket and Trailer Hitch for a 2015 Honda CR-V

Question

Question:

Hello, I am trying to purchase the Draw-Tite Trailer Hitch for a 2015 Honda CRV Touring model, however I cannot find the Tow Bar Wiring so that I’m able to attach it to the frame of the Hitch while connected to the vehicle. Please advise on how I am able to find the correct Two Bar Wiring on your site and product list, thank you!

asked by: David

0

Expert Reply:

To attach a 4-way wiring harness to the Draw-Tite Max-Frame Trailer Hitch Receiver item # 75742 you will want to use the Mounting Bracket for 4-Pole Flat Trailer Connector item # BK4F. This bracket will attach to the pre drilled tab on the Draw-Tite hitch. None of the 4-way wiring harnesses for any vehicle include this bracket.

I have linked a review video below along with a picture so you can see what this bracket looks like when installed.

The Draw-Tite Max-Frame Trailer Hitch Receiver item # 75742 is confirmed to fit your 2015 Honda CR-V.

For a compatible wiring harness, I recommend the T-One Vehicle Wiring Harness item # 118561. Tekonsha makes the most reliable wiring harnesses in the towing industry. This custom-fit T-One connector plugs into your Honda's wiring harness behind the driver's-side and passenger's-side interior trim panels, in the rear cargo area.

To round out your towing setup you will need the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip, hitch receiver lock with keys, hitch cover, and a storage case.

expert reply by: Jerred H

0

Brophy Mounting Bracket
(click to enlarge)

Answer 1

I recommend the Tekonsha T-One Vehicle Wiring Harness, #118727 for your 2021 Jeep Grand Cherokee. This custom-fit T-One connector simply plugs into your vehicle's OEM wiring harness that is located behind the tail lights. Then run a hot lead up…

view full answer...

Answer 2

The main difference between the Curt #C13264 and the etrailer #e98905 hitch receivers lies in the matte black powder coat finish of the etrailer hitch versus the traditional glossy finish of the Curt hitch. I recommend the #e98905 because the matte…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

The best hitch for a 2024 Hyundai Tucson is the etrailer Hitch item #e38KR. This hitch is custom fit and bolts to your Tucson with included hardware. It is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 525 lbs…

view full answer...

Recommended 4-Way Bracket and Trailer Hitch for a 2015 Honda CR-V

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching