Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty coupler has a low-profile latch and hinged ball socket that offers a tight fit with visual indication of proper closure around the ball - all to ensure quick, easy and secure hookup.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a quick look at the Bulldog collar lock coupler with low-profile latch, part number BD028499. Bulldog covers this coupler with a limited 5 year warranty that has a gross trailer weight capacity of 12,500 pounds. It's designed to work with standard 50 degree A frame trailers and it's a well done application so you'll just weld along the edges of the coupler to secure it to your trailer's frame. It has the cut out assembly for a jack where there's the main hole for the body of the jack and three bolt holes spaced apart according to industry standards for mounting the jack to the coupler. Now we're going to go over the coupler's mechanism. There's a collar that has to slide back and this hinged jaw will then be able to open up.
There's a pin in place that stops the collar from moving back accidently. So, we'll remove the pin and then we can operate the jack. We'll grab this lever and pull it, the collar slides back and the jaw pops open. Now, there's a shoulder here on our jaw that holds the collar back so it doesn't close while you're trying to hookup or unhook your trailer. To close the jaw, we can either just hit it closed or push it down while holding the latch and slowly let the collar over it.
We've got a 2-5/16 ball with us so we can show you how it works with an actual ball. The coupler is closed, so we'll grab our latch and open it up and the hinged jaw pops open, fit our ball into place and the coupler closes. Now our ball is secure, but it allows enough movement for it to track behind our tow vehicle. Now we'll just push our latch down and open our collar and the ball comes free. Again, we'll hold the collar back, push the jaw down and we can let the collar slide forward.
Lastly, we'll go over one measurement and that's the overall length of the coupler. It measures about 16-1/2 inches. That's it for a quick look at the Bulldog collar lock coupler with low-profile latch, part number BD028499. .
Average Customer Rating: 4.8 out of 5 stars (592 Customer Reviews)
Heavy-duty coupler has a low-profile latch and hinged ball socket that offers a tight fit with visual indication of proper closure around the ball - all to ensure quick, easy and secure hookup.Works great. Welded it on and was ready to go. Have ordered from etrailer before, and just like every time before my parts arrived very promptly and have never had any complaints with service. Will definitely be using etrailer again.
Extremely happy with my purchase. It took awhile to receive but not do to e trailer but to a manufacturer back order. I was kept up to date on the status of my order and even offered a similar substitute that was available to ship immediately but I choose to wait for what I had ordered. Nothing but great things to say about the product and the staff at E trailer
Best coupler ever - well worth the slightly higher cost.
Very easy to operate and slightly more tolerant of misalignment with the ball when hitching up. I keep a plastic deadblow hammer handy to operate it.
Way more secure attachment then the cheap Mau coupler that came with trailer which came uncoupled by itself.
This is exactly what I was looking for.
This is a very good heavy coupler. It is replacing a 5K surge brake toledo bulldog coupler on a trailer I have beefed up with 600# of steel to the 10K level.
To save $$$ and maintenance issues I am going to electric brakes after I decide on current axles or not.
Very speedy shipping: I did not expect to see it untill 16 July 12.
I have ordered from you several times and you have always exceeded my service expectations and your prices are very competitive.
I love the bulldog-collar-lok coupler. I used it to replace a broken coupler that never quite worked right. The collar lock coupler is much easier to take on and off the ball. Locking is simple, effective and easily verified for safety. Installation was easy. Pull off the old coupler assembley (torch or plasma cutter works great). clean up the work surface removing old welds. Weld it onto the frame, ensuring the frame is evenly touching on all sides and bottom. touching. Final step...go back to hunting !!
I'm a fan of Bulldog hitches. This product needs a little fine tuning on arrival. Very difficult to get the retaining pin in or out, I'll need to polish up the holes a bit. Once broken in I'm sure it will be just as functional and dependable as all the other Bulldog hitches on the road.
I purchased a Bulldog coupler to replace a damaged one. Recieved product with rust plumes under paint. Had to bend sliding handle on lock to make it work. Not enough hassle to return- its just a hitch.
Appears to be a refurbished unit, has several rust spots. Collar does not align very well with the shank of the coupler clam. Retaining pin holes a tad small.
Needs some lubricant for the collar, retaining pin holes reamed out a little, and a hammer to help open the collar.
All that said, I did get it delivered to my door at a price that was agreeable and better than everyone else. It also arrived about 4 days earlier than expected. Hope my welder does not have plans Saturday.
I have bought from etrailer before and will continue to do so. They have a good selection of products and good prices. Service is always fast and courtesy and they followup with you unlike most suppliers.
I WAS REALLY PLEASED WITH THE PRICE AND THE PROMPT SHIPPING.
I HAVE ALWAYS LIKED BULL DOG AND I WAS VERY PLEASED WITH THE QUALITY OF THE HITCH.
Easy to use website, great prices, super fast shipping, products packages professionally so the boxed were not destroyed in shipping. Extra care taken in every way. Then following up after delivery to insure I was a happy customer. Hats off to a great company. Etrailer has my business from now on.
Ordering the coupler was extremely easy and etrailer com responded acknowledging my order and shipped it asap. I think the organization and professionalism exhibited by etrailer.com is outstanding!
This product was purchased to replace an existing hitch that could only use a cheap hitch cover lock. After already having one trailer stolen this year security has become a priority. With this coupler we can use a heavy duty lock that covers the entire coupler and making it much more difficult to steal. Bulldog products always work for us.
The hitch and jack I bought arrived quickly. They were both at at very great price, plus the free shipping made it a very good purchase. I have another trailer to build and I will be back for more parts.
This is the second time ordering from ETRAILER.COM. The transaction has gone very smooth. Both times my orders were correct. Great prices too. As far as delivery, it made it to me before the time frame said it would. Great company. Will do business with them again
The hitch is the exact same hitch as my local farm store but it was nearly $40 (30% discount ) cheaper. It took 3 business days to get here, but I was in no hurry. It was worth the wait.
I needed a new coupler for a custom trailer I built. I love this style of coupler on my bumper pulls. Etrailer was great, product was easy to find and great price. Product shipped fast and easier than running to local store to pay more and not find what you need.
Best trailer tongue made! Great price and fast shipping..Very satified with etrailer!
What's not to like? Bulldog builds stout products, and etrailer got it here quickly.
Exactly what I needed to fix my horse trailer. Arrive on time. Awesome.
Work great
Unexpected fast delivery. I thought it would take a few days, which is reasonable. It came the next day. Thanks so much. Excellent product.
Products was as described and delivered ahead of schedule. I’ll put these guys in my “preferred” vendor list for sure.
Best product and price. Fast shipping, too. Great people to work with!
Do you have a question about this A-Frame Trailer Coupler?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Timmy P.
12/3/2022
Great product an great customer service