Maxtrax Flat Rack Mount for MKII Recovery Boards - T-Bolts

Video Transcript for Review of Maxtrax Flat Rack Mount MKII Recovery Boards - MA32PR

Hi, everybody, Andy here with etrailer.com. Let's take a look at this Maxtrax Flat Rack Mount for your MKII Recovery Boards. Now, this flat rack mount is going to install into the top channels of your crossbars or platform rack to let you carry up to four MKII Recovery Boards on your roof. And on your screen, I am including some photographs there just to show you what your boards are going to look like when using this mount. And so, hopefully, that that gives you a good idea from a few different angles there of what you can expect when you use this mount with your boards. So this is going to be a very simple operation, you're just going to twist both of these knuckles to hold two boards or just the top knuckle to hold four boards.

So as you can see, they're pretty easy to twist. And once you have them twisted, it's going to hold the boards on this mount very secure. And this is going to be a very simple installation in the top channels of your crossbars or platform rack. And this does include everything that you see here on my table. Of course, you're going to receive these four pins, these two brackets that these pins are going to install into.

And as you can see, I have them loosely mounted on these brackets. And then the hardware to use to install these brackets into the top channels of your crossbars or platform rack. You're going to get four T-bolts, four flat washers, and four nuts. And the nylon construction is very durable, very robust. It's gonna do a great job of resisting the elements.

Our pins here on the outside have a nylon build, and then, on the inside, they're stainless steel. So this is going to be very long lasting for you, and like I said, very well built, very well designed. Some overall measurements of just the brackets themselves. From end to end here, the overall length is about 13 inches. And then the overall width, here at the widest points here of the brackets, were about nine inches.

Then the overall height of the bracket were about two inches. They weigh a little over four pounds. Well, that's gonna wrap up our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.