E Track Wood Beam Socket for Standard 2" Lumber - Qty 1
(193 reviews)
Price: $12.41
In Stock
E Track Wood Beam Socket for Standard 2" Lumber - Qty 1
Item # 59149
Retail:$23.45
Our Price: $12.41
You Save: 47%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (193)
- Q & A (0)
- Videos (2)
- Photos
Erickson E-Track - 59149
- E-Track Cargo Organizers
- Board Holder
- Erickson
Features:
- Bracket lets you attach a standard 2" board to an e track anchor on your trailer
- Build shelving, dividers, and cargo restraints
- Easily adjustable and removable with spring loaded clip
- Holes in bracket allow you to secure lumber (hardware sold separately)
- Use with horizontal, vertical and single e track
- Zinc-coated steel resists rust
Specs:
- Quantity: 1
- Inside width: 1-11/16"
Use the wood beam socket to add standard lumber to an E Track anchoring system. Simply attach a piece of 2" lumber to a couple sockets and then clip the sockets into your E Track or Snap-Loc anchors. You can create adjustable and removable shelves, beds, and dividers in your truck, trailer, or toy hauler.
59149 E-Track Wood Beam Socket for Standard 2" Lumber - Qty 1
Video of E Track Wood Beam Socket for Standard 2" Lumber - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Erickson 4 Foot Vertical E-Track Installation
.
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Customer Reviews
E Track Wood Beam Socket for Standard 2" Lumber - Qty 1 - 59149
Average Customer Rating: 4.8 out of 5 stars (193 Customer Reviews)
by: James04/08/2020
I have a 14 foot flat roof trailer, and live in New England where snow gets wet ad heavy. I searched the internet for solutions, but nothing available. So I used your x-track vertical and e-track wood beam sockets to build an internal ceiling support system to prevent the roof from sagging under the weight of snow. After spending much time looking for solutions on the web, and coming up empty, this simple solution occurred to me.
by: Brad Blaha11/14/2013
I received the products just as described it too about 4 working days.
I plan on building shelves into my enclosed trailer for camping gear.
by: Larry12/26/2013
Haven't used them yet, I'll get back to you in a few days.
UPDATE
I have finished my project with the e-track 2x4 holders. I installed a shelf in the front of my race trailer. The holders fit the e-track a little sloppy, but that was not an issue for me as I have everything tied together. The brackets could be a little narrower. I had to shim the 2" width to make the wood fit snugly.
Pictures attached ,use them if you want.
by: Matt S12/12/2013
As requested, here are some pics of my e-track installation. I find the raised e-tracks in the floor very problematic and dangerous so I made sure they were recessed. This is now an extremely versatile cargo trailer.
by: David01/30/2021
Not only simplifies adding shelving, but makes the completed shelves removable, and adjustable. I only had about 13 inches to work with in my utility trailer, but I was able to get everything off the floor. (Also used vertical E-track.)
by: ZV04/26/2022
Worked perfectly. Used for a cross country move. Built a platform inside the trailer for all of the lighter weight and delicate items.
by: Jerry C.04/14/2017
Worked absolutely perfect to secure motorcycle front wheel chocks in my vintage '84 toy hauler. Using three lengthwise rows of your E-Track, these brackets allow me a flexible removable system to carry one or two various motorcycles on either side of the little 8' wide hauler. Thanks for your selection of great stuff, and your excellent prompt service.
by: J.T.09/27/2023
Is the only practical way to create part of the horizontal support frame for a sleeping platform in the trailer. Works fine for this use.
by: Bobby08/18/2015
Used these to build 3 removable and adjustable shelves into the front of my enclosed trailer.
by: Frank B07/19/2019
Product came in earlier than estimated and in great shape. Here are my 2x4 brackets installed in my trailer. Will put boards on top of the 2x4's and have a shelf for boxes when moving.
by: Raymond01/11/2019
OMG!!! I LOVE these!! All types of movable shelving is possible with these brackets!!
by: Jim MC987610/06/2014
I think these are excellent products. I created a tire rack in my car trailer by installing E- track, supplied from E-trailer as well, on both sides of my trailer at a height equal to the height of my track car tires +3" from the top of the trailer. My car's hood actually goes right under near the tire rack and shelves. These E-Track Wood Beam snap into the E-track. I bought 2 - 2"X4"X8' pieces of wood for every beam I installed into the E-track across the trailer. For 6 beams, I need 12-2"x4"x8's of wood. I doubled every beam with 2-2"x4"x8' for strength. To do this, I used 2-1/2" coated deck screws and screwed them together. On both ends, where the 2"x4"x8's rest in these E-track Sockets, I separated the beams with the use of 2 washers per screw. That allows one 2"x4"x8" to slide down and rest in the E-Track Wood Beam Socket. I drilled holes in the beams to match up with the oval shaped holes, and then thru bolted the beams into these E-Track Socket brackets, so that the wood beams are secured in the brackets.
The total cost for each beam is approximately $15.00 vs. buying a pre-made AL E-Track beam for app $100. I'm using 6 beams for my needs. 2 beams for the tire rack, and 4 beams to create 2 shelf units. The shelf units will require a sheet of 1" 4'x8' plywood, which I will cut into 2-2'x8' sheets, and screw into the bottoms of the beams with cut outs to go around the E-Track Sockets, to create the shelves. Pretty easy, and pretty cost effective. The trick to this project is taking time to install the E-Track correctly at the correct height, and even as measured side by side. I "measured twice, and drilled once" when installing the E-Track. It's not rocket science, but take your time with it, double check the mounting points, the height, and position, and you'll be very happy with the project.
As always, buying all the material from E-Track helped make this project a snap and saved some serious money over the AL E-Track beams!
Jim M.
10/6/2015
Everything has worked out perfectly. A beam solution using these e-Track beam brackets designed for wood 2x4s weighs more than an aluminum beam, but it cost less than 110th the price! I built 6 beams, so I saved $500 ! It is worth doing this solution!
by: Juma04/20/2017
I used them to make shelves in V of the trailer and it's working great
by: Jim M.05/13/2012
Was looking for an way to add removable and moveable shelving to my enclosed trailer. These are super quality
by: George N.04/20/2019
I used these to build a bunk and shelf unit in my Sprinter van. As I’m a rather big and tall guy I was a little nervous the first time I climbed into the bunk. Between the etrack and these 2x4 supports gave me a great night sleep. For the bunk and later the shelf I used 4 etracks and 4 of these 2x4 supports, and two 6’ 2x4s and a plywood base at 3/4” thick. After I tied everything in the supports were all strong and solid. I could turn over on my side and never felt any rocking motion or unsteadiness. I highly recommend the etrack and the portable 2x4 etrack hangers.
George N.
4/20/2020
The project worked out very well for about six months. But since then Imhave remodeled my van and built a bunk with storage. I saved the etrack wood beam sockets just in case I come up with another idea for them. They worked great and I’m happy that I kept them.
by: John S.05/04/2014
Excellent product. I purchased 4 of them in a previous order and they worked so well that I decided I needed more. I installed the E- Track system in my cargo trailer and this item makes it extremely simple to mount temporary partitions in the trailer which take only seconds to move or remove. They can also be used to make a temporary shelf and probably other purposes as well.
John S.
5/4/2015
One year later, these items still perform flawlessly. From securing items in place to using them for movable partitions this product is outstanding...
by: Mike W.12/20/2016
I used these moveable brackets to hold a shelving unit I made for my utility trailer. With them installed I have a ton of storage and when removed I can fit two ATV's inside. Very versatile.
Mike W.
12/20/2017
Still a solid product that made my trailer extremely versatile. Great company to do business with.
by: Barbara K08/07/2017
Modified this cargo trailer to haul RC airplanes(too big to fit in my pickup) and remove the upper deck to make it useful for hauling other items. This makes a truly utility cargo trailer. Numerous tie downs with Etrack is really great. I have other pics if your interested. I just purchased an enclosed car hauler and I plan on installing Etrack in it. Thanks for making great products !
by: Mr. G08/10/2020
If I could give this 10 stars, I would. I'm a High School Band Director who uses a trailer to get instruments from performance venue to school and back. My previous trailer didn't have any E-track hardware and I just did the best we could. There was always a great deal of shifting of equipment during transport. Now that my current trailer has E-track hardware, I can secure all of my equipment easily and quickly reorganize the entire trailer according to the job's requirements. If you've not got E-track, get it. It's more than worth it's cost in saving of time and convenience.
by: Bill D04/24/2017
This product does exactly what it is supposed to do. It locks easily into E-Track, and holds a 2" board. The company that I work for uses about 100 a year, and we have not had any problems.
Bill D.
4/25/2018
It is a good product that does what it was designed to do. No complaints.
by: JW04/04/2014
makes it very easy to mount a shelf in your trailer. i used it for a shelf in the front of my cargo trailer to hold motorcycle helmets, boots and riding gear. i cut a 4' e-track in half and backed the e-track with 3/4 plywood on each side of the trailer for support. in cut the 2 X 4 to length and then used a 2" wide strip of 3/4 plywood as a cleat that attached to the front of the trailer. cut the plywood shelf to fit and you have a sturdy shelf that sits over the front of your motorcycle. you can include vertical pieces of plywood for dividers and a 6 inch piece of 3/8 plywood to cover the ugly 2 X 4 and give yourself a 2" lip to help keep things in place.
by: John O10/25/2015
The E Track 2x4 fasteners worked very well with the Vertical E Track in my new 6 x 12 enclosed cargo trailer. They are simple to install on the end of your 2 x 4 lumber and hold in place any shelves mounted on them. The locking pins insure they will not come out while in motion.
by: Michelle04/11/2018
offers GREAT flexibility in my Cargo trailer, shelves can easily be moved.
Only improvement would be to enlarge the front holes to accept a tie-down hook, or S-hook, that way i don't have to change out to a O-ring as often.
by: NextLevelDetailAz08/09/2017
Good quality product. Thats why I shop etrailer because they wont sell something they dont believe to be of good quality and function. In house testing of the product before it's on the site save us customers the headache of failed products, returns & replacement. One year follow ups with their customers helps this too. Excellent Service reliable products & instructional videos.
25
193
Show More Reviews
See what our Experts say about this Erickson E-Track
- Installing the E-Track Wood Beam Socket For Standard LumberOnce the E-Track Wood Beam Socket for Standard 2" Lumber - Qty 1 # 59149 has a beam screwed in at both ends, it cannot be removed without unscrewing the wood beam. The beam would need to be lifted straight up and out of the hanger to allow movement and then be screwed back in place in its new location. You will be able to use the same piece of lumber cut to width over and over again, but it will need to be removed to change location of the hangers in the track.
view full answer... - Available Items to be Used on Erickson E-TracksI have linked our selection of items that can be used on the Erickson E-Tracks # E19148 that we carry. A couple of examples are the E-Track Wood Beam Socket # 59149 and the Brophy Vertical Tool Holder # ETVH
view full answer... - Cargo Tie Down Recommendations for 5x8 Enclosed Cargo TrailerBetween the three cargo tie-down anchors you referenced, parts # RR2K, # RR8K and # RR09, I would go with the # RR2K because it includes the reinforcing backing plate and because it offers you the choice of recessed or surface mounting. Since your cargo items just need to be secured inside the trailer, but not have their full weight held, these items should be fine. I can offer you another option to consider, one that might better suit the trailer and cargo items, but that will be up to...
view full answer... - Using E-Tracks and Beam Sockets to Create Second Level for Cargo in 5th Wheel TrailerThe Erickson E-Track Wood Beam Socket you referenced, part # 59149, will work with 2 x 4 lumber or the 2 x 6 material you intend to use. These are usable with either vertical, horizontal or single-slot E-Tracks. In your application you can use either one of the horizontal track lengths, such as 2-foot # EM59150 or 5-foot # E19148, or one of the other lengths offered, or you can use the single-slot # SLSU or 2-slot # EM19145. The advantages of using the smaller sections are reduced overall...
view full answer... - Options for Adding Bike Rack Inside Enclosed Cargo Trailer with Track SystemNot directly, but I may still have a solution for you. I wasn't able to find an "A-Track" system but if it's anything like the E-Track or X-Track systems then you could potentially use some of the E-Track Wood Beam Socket for Standard 2" Lumber # 59149 as a base and then install a custom-mounted fork mount rack like the Kuat Dirtbag # DRT9P or Swagman Impakt # S62FR. This way you still get a bike rack that mounts to your floor but you can also remove it. Another option would be to use...
view full answer... - Recommended Custom Length Load Beam for E-Track SystemsThe E-Track Aluminum Load Support Decking Beam EM08905 is only adjustable from 92-103 inches. For a custom size beam, I recommend the E-Track Wood Beam Socket for Standard 2" Lumber # 59149. This allows you to lock your brackets into your track and then add a wood support of custom length.
view full answer... - E-Track Wood Beam Socket Has a BottomThe E-Track Wood Beam Socket, item # 59149, does have a bottom for a 2 x 6 to rest on , and it is 3-1/2 inches tall.
view full answer... - Can Beam Bracket 59149 Be Used to Make a Tailgate on a TrailerIn order to accomplish what you want to do there isn't a better product than the E-Track Wood Beam Socket # 59149. Of course you would need two of them. You wouldn't want to make the tailgate too tall either since it would only be supported at the floor of the trailer.
view full answer...
- Installing E-Trac To Build Shelves In Fiber Glass Box TruckThere will still be metal studs behind the fiber glass wall in the box truck, so you want to purchase a stud finder that is capable of detecting metal studs to attach your track to. I am not entirely sure what you are trying to build when you mention rafters but it sounds like you may be trying to build a shelf like in the pictures I have attached. You can use the E-Track Wood Beam Socket part # 59149 and horizontal or vertical e-track (depending on what you are trying to accomplish) like...
view full answer...
- Does the E-Track Wood Beam Socket # 59149 Have a Weight CapacityThe E-Track Wood Beam Socket # 59149 that you referenced doesn't have a capacity listed for it because the wood installed in it would break long before it would. To install the vertical E-track sections like the 4 foot section part # E19146 you could use self-tapping screws. I attached an install video for this for you to check out as well.
view full answer... - How Much Weight Can the E-Tracks Hold Attached To PlywoodYes, you can use wood screws to secure the e-tracks to the plywood walls in your trailer. However, as you mentioned the weight capacity would be less than if you were to attach them to metal beams. The tracks themselves can handle up to 2,000 lbs but the weight capacity of the system is always going to be limited to how they are attached. Unfortunately, there would be no way to give you specific figures or ratings when attached to plywood as there are just too many factors involved such...
view full answer...
- E-Track Recommendation for Installing on the Inside of a Carson Fun Runner Toy HaulerSounds like a good plan. For the 5 foot sections of the E-track you would want part # E19148. The # EM59150 that you referenced is sold in 2 foot sections. You might also be interested in the E-Track Tie-Off Ring # 59131, E-Track Wood Beam Socket # 59149, and E-Track 2" D-Ring part # E59143.
view full answer... - Recommended Crossbars for Open Wood Framed Trailer to Carry KayaksThe E-Track Wood Beam Socket for Standard 2" Lumber # 59149 will most likely work with metal tubes as crossbars as long as they are screwed into place in the same way as the wood is intended to be attached. You will need to determine the correct weight capacity for your custom application. Since you are looking to add kayaks to an open wood framed trailer, I recommend the Malone TopTier Load Bar Kit for Utility Trailers - 250 lbs # MPG493. This will give you the uprights and crossbars...
view full answer... - Why Doesn't E-Track Wood Beam Socket # 59149 Have Weight CapacityThe E-Track Wood Beam Socket # 59149 that you referenced doesn't have a capacity listed for it because the wood installed in it would break long before it would. Using it with angle iron instead of wood like it was intended for would make it really hard to give a stated capacity.
view full answer... - E-Track Recommendations for Making a Queen Size Bed on Inside of Enclosed TrailerThe correct product to use to support the boards you plan on using to support the bed would be the E-Track Wood Beam Socket # 59149. Since you will want to have the 2 by 4s on edge to support the plywood, and the only way the # 59149 could be installed in this fashion is if the e-tracks are installed horizontally on your trailer walls. I would recommend using two etracks that will be on either side of the trailer interior walls running horizontally at the height that you want the bed to...
view full answer... - Installing a Load Stop at Rear of 4 x 8 Foot TrailerI have a solution that should work pretty well for you. I'd run a strip of E-track like # E19148 along the edges of the trailer, at least at the front and rear of the trailer. The E-track could be used to secure the lumber using a ratchet strap like # SLLS28RER. The straps are sold individually, so you'd want at least two. At the end of the E-Track, you could use a wood beam socket like # 59149 to secure a board like you have shown in the photo. The sockets are sold individually.
view full answer...
- Can Horizontal E-Tracks be Used with Erickson Wood Beam Sockets # 59149You can absolutely use the Horizontal E-Tracks # EM59150 that you referenced in your enclosed trailer with 4 of the Wood Beam Sockets # 59149 to create a shelf. There isn't any structural benefit to using vertical E-tracks for this application over the horizontal tracks you are wanting to use. Vertical mount tracks would just allow for a bit more versatility as you could lower or raise the shelf if desired (but in your setup you could move it forward or back). The holes on the brackets...
view full answer... - Is There a Way to Create a Second Floor in an Enclosed Trailer Using E-Track ComponentsE-track offers a wood beam socket part # 59149 which can fit in the vertical E-track part # E19146 that you referenced. This would be perfect for creating a second floor/deck in the trailer. I attached an install video for you to check out as well.
view full answer... - E-Track Wood Beam Socket # 59149 Recommendation and CompatibilityYou could use a E-Track Wood Beam Socket with the E-track setup that you have. I spoke with my contact at Erickson and she went out and put a E-Track Wood Beam Socket # 59149 into an E-Track Trailer Cargo Control # E19148 and found that the # 59149 would not hang over the bottom of the E-track once installed and would work for your setup. I attached a review video for the E-Track system for you to check out also.
view full answer... - Using E-Track to Make Bunk Beds Inside of an Enclosed TrailerSorry Jim but your wife already got to us and I'm afraid you'll have to go on the all-beet diet! I kid, I kid. The Rack'em shelf kit # RA-13 is great for shelves but to make some bunk beds I recommend going with E-Track # E19146. This single 4 foot long section is rated for 6,000 pounds (of course the way it is mounted and what it is mounted to also would have to be rated that high to get the full capacity). But if you used 6 of these (2 extra for added support) then you and your hunting...
view full answer... - Availability of E-Track Mounting BracketsThe E-track brackets like what is attached to the CargoSmart Accessory Bar # 3481750 you referenced are not available as a separate component, but we do have many other accessories that use the same type of mount. These include the Spare Tire Carrier # RA-16HST, Storage Hook # EM59142, and the Wood Beam Socket # 59149. I have attached a link that will take you to our complete selection of similar products that you can look through.
view full answer... - Extra Sockets for the Rackem Shelf Kit Part # RA-13I assume you are referring to the sockets that hold the boards? If that is the case then we do not sell them separately for the Shelf Kit part # RA-13. However, a more cost effective solution would be to use the E-Track part # E19146 with the E-Track Wood Beam Socket part # 59149 as you would be able to choose the amount of shelves. The E-Track part # E19146 might also work with the Shelf Kit part # RA-13 but I can't confirm this.
view full answer... - What is the Difference Between a Vertical and Horizontal E-Track Including the DimensionsThe main difference between the horizontal and vertical E-tracks is which way the slots on the bar run. The horizontal E-track cargo control like part # E19148 can be mounted horizontally on the wall or floor in an enclosed cargo or open trailer. It also creates several tie down points to secure loads. It is 5 feet long and has a overall width of 5-inches. The slots each have a length of 2.45-inches and a width of .58 inches. See diagram to the right. Additional lengths we offer are 2...
view full answer...
- Parts Needed To Build Fold Down Single Bed On Horse trailerTo make a bed inside your aluminum 2 horse trailer I recommend going with E-Track # E19146. This single 4 foot long section is rated for 6,000 pounds of course this is the mounted weight, we just want to ensure that the trailer is rated above 2,000 pounds if in future use that capacity for other purposes. But if you used 2 extra for added support then you and your hunting buddy or grand kid, you would be good to go. You could then use 6 or 8 of bracket # 59149 to start creating the bunk...
view full answer...
Do you have a question about this E-Track?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brad B.
11/14/2014
Great 2x4 mount they are low cost and work well.