Summer Starts Here - Save up to 70%
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. Converter is made using SMT to ensure superior performance.
Features:
Specs:
Installation
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area.
Once installation is complete, the 4-way connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A tail light converter is built into this T-connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of the trailer. This converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (30 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into existing wiring - no cutting, splicing or tapping required. Converter is made using SMT to ensure superior performance.I hooked up this harness as the plugs were correct and found I had no turn signals. Luckily I am a mechanic and was able to identify the correct terminals and repin the connectors so it would work.
Good directions made for easy installation! Thank you!
Trim removal instructions did not match my vehicle. I watched an anonymous video which was helpful
Yes the product worked great.
Thank you
Jerry
The wire harness works well, however I did just replace it after the same harness stopped working after it was on my car for three years.
Product arrived in a few days, bought the Curt hitch, like the idea of three bolts each side versus two. Super easy install on my Vitara, removed tow hook, cleaned bolt holes, chassis was already clean, lifted in place with buddy, some blue loctite and a torch wrench. Beer-thirty was started
Super happy, no trimming of rear bumper. Wa-la!
Prefect fit for my Kuat Pivot and NV 2.0
Good fit. Spot-on plug mating. The wire runs button up clean with enough length that you're not fighting the job. Thanks to whoever did their homework on this.
Very quick delivery. Seemed to be fairly well packaged. One concern, the driver's side flange that attaches to frame is slightly bent - hopefully intended for a proper fit and hopefully not damaged during shipment. I'll know when I install. I really like Curt hitches and found the best price at etrailer.com.
Gary B.
12/8/2018
Great. Looks great installed and weathers well.
Just installed on my 2007 SX4. All went as was explained in instructions and was an easy install. The 4 push pins in the floor that hold the side panels in broke when I removed them. They were 7 years old and brittle so no reflection on the product. It would have been nice if 4 new ones were included in the kit. Overall I am pleased with the product and e trailer.
Norman
2/3/2015
Unfortunately the trailer hitch lasted longer than the car I installed it on. The hitch worked well for the time I used it.
The wire harness sent was not the right one for my car, but we made it work. This was not really your fault. In 2010, Suzuki was getting ready to leave the US market and there were about 4 different models of the SX-4 all of which looked the same. The trailer hitch itself was OK.
Easy to install and 'cut' a lot of corners by not needing to splice wires, no pun intended! Works great for my utility trailer lights for my Suzuki Grand Vitara V6, as storage in the vehicle is not always adequate.
Receiver and wiring installed well, instructions clear. Paint on receiver chipped, did not fair well in shipping box. When installing ball mount I can see it's not level with the ground, just a little. I'm happy with receiver, just can not give a excellent review.
Surprised to see the personal attention E-trailer gave to my order. Several e-mails to ensure that I was satisfied completely. Product is as implied and works great. I contacted tech support and immediately answered my question and the wiring was completed. Have used e-trailer several times and this is the reason why...Their attention to detail. Great to do business with.
TKS. Bruce S.
i recieved the the light controls for my trailer. I am happy with the product and the service. easy to navigate website. I will order other items from this seller.
Henry T
as usual etrailer is fast and always sends the right parts
Easy install, works great!
Works perfect
Paula was very helpful in getting all the parts i needed and was very responsive in getting back to me with my questions! Thanks!!
like-work-good
Fast shipping , all good in order.
Great product!! installed in under ten minutes!! and works great!!
AAAA+++ saved me hundreds !!!!!!!!
Fits my Suzki SX-4!!!!!!!Kinda a pain to install, but easier than patching wires.
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
8/24/2023
It is very unusual for that to have happened. This would be covered under the warranty for the harness.