Will Installation of Trailer Hitch # C13001 Interfere with License Plate, 2007 Suzuki Grand Vitara
Question:
the plate number of my suzuki grand vitara is located at the center of the bumper, will the tow hitch bump the plate number?
asked by: Joseph C
Expert Reply:
The receiver tube on Curt Trailer Hitch, # C13001, will be under the rear fascia (bumper) when installed on your 2007 Suzuki Grand Vitara, so it will not interference with the license plate. I have included a link to the installation details for reference.
To complete your towing set up, the recommended ball mount is # C45010, and the recommended pin and clip is # PC3. You can use ball # 19260 (1-7/8 inch diameter), # 19247 (2 inch diameter), or # 63847 (2-5/16 inch diameter). For trailer wiring, you would need the Curt Wiring Harness with 4 Pole Trailer Connector, # 56002. I have included a link to the installation details for reference.
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Installation of Trailer Hitch and Wiring on a 2008 Suzuki Grand Vitara
- Q&A: Does The Draw-Tite Trailer Hitch Receiver # 75448 Use all Mounting Holes 2012 Suzuki Grand Vitara?
- Q&A: Do Holes Need To Be Drilled Into The Adjustable Arms Of The Stromberg Carlson Adjustable Hitch
- Q&A: Does Stromberg Carlson Trailer Hitch SC45MR Have Capacity for 3,000 lb Trailer
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Can 2015 Ford Edge Tow 3500-Lb Trailer
- Q&A: What Type Of Hydraulic Fluid Should I USe With A Lippert Hydraulic Leveling System?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: What is an RV-Approved Bike Rack? (And Do You REALLY Need One?)
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose a Bike Rack for a Motor Home or RV
- Article: How to Choose the Right Trailer Hitch Class