bing tracking image
  1. Accessories and Parts
  2. Dexter
  3. Trailer Brakes
  4. Hydraulic Drum Brakes
  5. Brake Assembly
  6. 10 x 2-1/4 Inch Drum
Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Right Hand - 3,500 lbs

Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Right Hand - 3,500 lbs

Item # 23-313
Retail:$178.99
Our Price: $114.86
You Save: $64.13
Accessories and Parts
Shipping Weight: 10 lbs
Add to cart
In Stock
Dexter Trailer Brakes - 23-313
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
10" x 2-1/4" Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels. 1-800-940-8924 to order Dexter accessories and parts part number 23-313 or order online at etrailer.com. Free expert support on all Dexter products. Great prices and Fastest Shipping for Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Right Hand - 3,500 lbs. Accessories and Parts reviews from real customers.
  • All Info
  • Reviews (12)
  • Q & A (0)
  • Videos (1)
  • Photos

Dexter Accessories and Parts - 23-313

  • Trailer Brakes
  • Hydraulic Drum Brakes
  • Brake Assembly
  • 10 x 2-1/4 Inch Drum
  • Dexter
  • RH
  • 3500 lbs
  • Single Servo

10" x 2-1/4" Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.


Features:

  • Hydraulic drum brake assembly is designed for use with a surge-type trailer brake actuator
  • Periodic manual adjustment required
  • Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
  • Mounting hardware included
  • Made in the USA


Specs:

  • Configuration: right hand (passenger's side)
  • Dimensions: 10" diameter x 2-1/4" wide
  • Mounting flange: 4 bolt
  • Wheel size: 13", 14", and 15"
  • Axle rating: up to 3,500 lbs


K23-313-00 Dexter 10" Single-Servo Hydraulic Brake Assembly - RH - 3.5K

Replaces 23-313





Video of Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Right Hand - 3,500 lbs

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Dexter Axle Trailer Brakes 23-313 Review

Customer Satisfaction Score:


Customer Reviews

Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Right Hand - 3,500 lbs - 23-313

Average Customer Rating:  4.9 out of 5 stars   (12 Customer Reviews)

10" x 2-1/4" Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.

by:

I'm not reviewing the product as much as how easy it was for me to find it on etrailer.com. I built a firewood/utility trailer about twenty years ago. Recently, I noticed the right hub getting hot. At first, I thought it was bearings, but found that the brake backing plate had been bent somehow and the brakes were rubbing. Some of the other parts were badly worn, and at first, I thought about just replacing the parts I needed. It turned out to be cheaper and way easier to buy the whole assembly. It's exactly what was on there before, so, even though I haven't installed it yet, I'm sure it will work out perfectly.



by:

I needed to replace the brake pistons on both axles. They are not difficult to replace, but you need to some work to get at them. This brake drum assembly is the complete brake assembly. Remove 4 nuts & the hydraulic line, & the assembly is off. Install the new assembly, tighten the nuts, attach the hydraulic line, adjust the brakes, bleed the brakes & it was done. This was the easiest brake repair I have done. The assembly was an exact fit. The price for the assembly was very close to the price for just the pistons on other sites.



by:

Worked great as an exact replacement of my previous brake assembly.



by:

Great ! Bolted right on in about 10 min! Nice new parts! Won't have to worry about my trailer brakes for years now!! Wish I knew about eTrailer years ago!!



by:

Product arrived quickly and were as described. Installed today on boat trailer with no problems and all parts were included in packaging. First time using
etrailer but won’t be the last.



by:

Still working



by:

So far so good. Put lot's of miles on it and no issues.



by:



by:



by:



by:



by:


12
12

See what our Experts say about this Dexter Accessories and Parts

  • Can Timbren Axle-Less Suspension be Used for a Boat Trailer/Marine Applications
    You can use Timbren Axle-Less suspension for marine applications. But you would need 3500 pound kit # ASR3500S05. If attaching brakes you would need hydraulic brakes and not electric brakes. For a hub and drum assembly you could use # 8-247-50UC3-EZ which is a galvanized model for corrosion resistance. It has a 5 on 4-1/2 bolt pattern For compatible brake assemblies use # 23-312 for the left and # 23-313 for the right. Then you would need a brake actuating coupler, see link to the right...
    view full answer...
  • Installing Hydraulic Trailer Brakes on a Kristi Utility Trailer
    There are two ways to go. Drum brakes and Disc brakes. To determine which assemblies will fit on your spindles we will need to know the inner and outer bearing and seal part numbers. We will also need the Brake Mounting Flange bolt pattern on the spindles and the bolt pattern and size of the wheels that are on your trailer. For the hydraulic actuator we will need the size of the trailer tongue where the actuator will mount. If you will get back to me with your choices and the needed information...
    view full answer...
  • 3,500 lb Capacity Hub/Drum and Brake Assembly Recommendation for 2004 Karavan with 3,500 lb Axle
    For a replacement Dexter 3,500 hub and drum for your 2004 Karavan Boat Trailer you would want the part # 84546UC3-EZ. This hub has the same 5 on 4-1/2 inch bolt mounting flange as what you most likely currently have and has a 3,500 lb capacity. If you have a different bolt pattern check out the link I attached to see all the hubs that would fit the same spindle. I also attached a link to an article on determining wheel bolt patterns as well. Then for brake assemblies you would want the...
    view full answer...
  • What Brake Flange Bolt Pattern Do the Dexter Hydraulic Drum Brake Assembly 3,500 Lbs Fit
    The Dexter Hydraulic Drum Brake Assembly part # 23-313 for right hand and part # 23-312 for left hand uses an industry standard brake mounting flange pattern which I have attached a photo of below. I would bet this is what you have as you are very close and it's not uncommon for there to be a 1/8" - 1/4" discrepancy since measuring the center of the hole is not always easy.
    view full answer...
    Image 1 for
  • Recommendations for Hydraulic Brake Assemblies on a 1993 Trail Rite 3500 Pound Boat Trailer
    Whether you ultimately decide to go with free-backing or not, I would recommend getting galvanized brake assemblies. The springs are stainless steel and the plates are galvanized which will help them hold better since you have a boat trailer and the brake assemblies maybe exposed to more water. I like the free-backing systems better. They will make backing down a boat launch a bit smoother, especially if someone else is backing the vehicle in while you are in the boat pulling off the trailer....
    view full answer...
  • Replacement Trailer Hub Recommendation for Bearing Race Numbers L44610 Inner/Outer
    Sounds like you have an EZ lube spindle like the part # TRU74FR. We don't carry any type of sleeve for this type of spindle. Are you talking about a washer for the castle nut possibly? The part # L44610 is actually a race for # L44649 bearing and since you said you have two of them that would indicate you have a 3,500 lb axle hub. The part # 84546UC3 is a 3,500 lb hub like you'd need then. The uni-servo assemblies part # 23-313 and # 23-312 would work well with this.
    view full answer...
  • Wheel Cylinder Needed for 10 Inch Dexter Hydraulic Brake Drum Assembly
    Based on my research, the 36-94 backing plate is used on the Dexter Single Servo # 23-313, # 23-312 hydraulic brake assemblies. For a 10 inch brake, left hand side, you will want # BP17-030 Wheel Cylinder. For 10 inch brake, right hand side, you will want # BP17-020 Wheel Cylinder.
    view full answer...
  • Replacement Hub/Drums & Brakes to Replace AL-KO 7230 Hubs
    You can select your new hubs by matching up your axle weight rating, wheel bolt pattern and the bearings used in your current hubs. Based on my research your hubs are 10 x 2-1/4-inches, are from a 3500-lb axle and have the 5-on-4-1/2 bolt pattern. If they use inner bearing L68149 and outer bearing L44649 then you can use Dexter hub/drum # 84546UC3. If you have other bearings you can use the linked page to select your axle rating, bolt pattern, bearings to find a matching hub. For brakes...
    view full answer...
  • Trailer Brake Solution for 3,500 lb Axles for Saltwater Use
    We have galvanized hub/drums that are a fit for 3,500 lb axles like the part # 8-247-50UC3-EZ which would work well. For compatible brake assemblies use # 23-312 for the left and # 23-313 for the right if your brakes are hydraulic or part number # AKEBRK-35-SA for if they are electric.
    view full answer...
  • Replacement 10-Inch Hydraulic Brakes, Seals, Bearings for Boat Trailer With 6000-lb Axle
    Thank you for providing specific capacities and dimensions for the replacement hydraulic brakes you need for your boat trailer. All of the hydraulic drum brakes we offer for 6000-lb rated axles are the 12 x 2-inch size. Our 10-inch hydraulic drum brake assemblies top out at a 3500-lb axle rating; please see the link provided. Demco # 40716 and # 40715 are examples. It is possible that your trailer manufacturer used a 6000-lb-rated axle with other components that are of lower capacity....
    view full answer...
    Image 1 for

Do you have a question about this Accessories and Part?


Info for this part was:

Employee Lindsey S
Updated by:
Lindsey S
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Patrick B
Expert Research:
Patrick B
Employee Jeff D
Installed by:
Jeff D

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.