You are correct, the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06171 is the correct fit kit for your 2001 Toyota Tacoma, however this kit is only offered including the landing pads.
Since you need 4, you'd order two of these kits and just discard the pads; Or, you can hold onto them should you ever need a replacement. view full answer...
Yes, you found all the correct parts for your 2019 Toyota Tacoma TRD with a factory 7-way. The Redarc Tow-Pro Elite Brake Controller # RED44FR will connect to your factory wiring with the Plug-and-Play Wiring Harness # RED99FR. You will then be able to place the control knob in the Mounting Panel # 331-TPSI-002 and replace one of the empty slots for a clean, factory appearance. view full answer...
To install the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR on your 2022 Toyota 4Runner with the factory tow package you just need the Wiring Adapter # RED49FR and the Mounting Panel # 331-TPSI-002.
Attached are some installation videos for you to check out! view full answer...
I can confirm that all the items that are in your cart will fit your 2021 Toyota Highlander. I do have some suggestions and recommendations as well. The Tekonsha wiring harness item # TK57VR you selected includes a plug and play adapter but it is only compatible with Tekonsha Brake Controllers. I recommend the Tekonsha Prodigy P3 Trailer Brake Controller item # 90195. This is a proportional brake controller which means the brakes on your trailer apply pressure in proportion to your vehicle's... view full answer...
I just spoke with my rep at Curt and he told me you do not need to purchase a wiring harness that is specific to the 2021 Toyota RAV 4 Prime model. He said that the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # C56434 will fit your RAV4 Prime.
To get a 5-Flat connector you will need the Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat item # C57187. view full answer...
For your discontinued Yakima Bolt Top Loader that is installed on your camper top, I confirmed with my tech at Yakima that the part you need is the Replacement Mounting Bracket Hardware Kit for Yakima Bolt TopLoader 1992 and Newer # 8880025. Unfortunately, they did not have the exact specs for the threading or the diameter of the bolts on-hand. view full answer...
There is only one ladder rack that is compatible with the BAKFlip MX4, and that is the Adarac Pro Series ladder rack since it has uprights that are 90 degrees (perpendicular) to the truck bed rails. I've listed the Adarac Pro Series Ladder racks for each bed size that the 2017 Toyota Tundra is available with, so you'll want to choose from these:
5-1/2 Foot Bed # A4001665
6-1/2 Foot Bed # A4001671
8 Foot Bed # A4001676
All of these will allow your BAKFlip MX4 folding tonneau cover to fold... view full answer...
You can definitely use the Tekonsha OEM Replacement Wiring Harness # 22117 on your 2017 Toyota Tacoma so that you have a fully functional 7-Way. You will just need to connect the following wires from the harness to the following functions of your brake controller:
Blue - 7-Way Output to Trailer
Black - 12V Power
White - Ground
Red - COLD Side of Stop Light Switch (only gets hot when brake pedal is pressed)
If you already have a 4-Way installed on your Tacoma then you'll want the Universal... view full answer...
When installing The Redarc Brake Controller # RED24FR on your 2022 Toyota Tacoma, you will want The Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers # RED99FR. The connector is located behind the kick panel and is taped to another harness near the emergency brake pedal. I will attach a picture below.
If you have any further questions in regards to your Redarc Controller please feel free to reach back out to me and anytime and I will be more than happy to further... view full answer...
Yes, we can get you set up with some better brakes for your motorcycle trailer but in order to do so we are going to need a bit more information.
The first thing you're going to need to check for is a mounting flange on your current axles. If they don't have this flange, then you're going to either get new axles with the flange already welded on, or take your axles to a shop and have them weld it on.
Next, you're going to need to find out what hubs fit your current spindles. You can find... view full answer...
We do recommend using the Upgrade Kit # ETBC7L to make your tow vehicle (2016 Toyota RAV4) 4-Way compatible with the Curt Echo # C51180. With that being said, the Curt Adapter # C57674 you picked up will actually work out great! You just need a few more pieces to finish up the ETBC7L kit:
20' of 12 Gauge Wire - # 12-1-1
40 Amp Circuit Breaker - # 9510
3/8" Ring Terminal - # DW05705-1
2 Count of the 3/16" Ring Terminal - # 44-5310A
3 Count of Self-Tapping Screw - # FA1131822
Zip Tires -... view full answer...
The replacement mounting clamp kit for the Thule 421 Xsporter would be # THXK4. The kit is compatible with your 2017 Toyota Tacoma. The Xsporter ladder rack is width adjustable, and even though the bed on a Ranger was wider, it'll work just fine on your Tacoma. view full answer...
The correct brake controller wiring harness for the P2 # 90885 and your 2015 Toyota Tundra Crew Max is # 3031-P. I have included a link to a video review of this harness for you. view full answer...
You can add parts to your 2018 Toyota Camry XSE in order to tow and you will need to start with a trailer hitch and I recommend the Curt Trailer Hitch #C11576 due to the company's reputation for high-quality trailer hitches. This is a Class I hitch with a 1-1/4" receiver that has a 2,000 lb towing capacity and 200 lb tongue weight capacity.
Adding a wiring harness will also be necessary in order to power the lights on your trailer and the T-One Vehicle Wiring Harness with 4-Pole Flat... view full answer...
When it comes to which lift kit you need for your 5th wheel trailer there are two options with both being for a top mount kit:
Axle Riser Kit - Single Square Torsion Axle - 3-1/2 inch Lift # LC382741
Axle Riser Kit - Single Diamond Torsion Axle - 3-1/2 inch Lift # LC270682
The Lift Kit # LC382741 is for a square shaped axle, and The # LC270682 is for a diamond shaped axle. All you need to do is check under the trailer and see what axle shape you have.
I attached a review video link below. view full answer...
When it comes to choosing the proper weight distribution system for your 2014 Toyota 4Runner The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 pounds GTW, 600 pounds TW # FA94-00-0600.
When it comes to using a weight distribution system you need to be as close as possible to the weight you will be towing. If you go with anything way over the recommended weight it will cause more sway and could be dangerous. Make sure not to overload your vehicle adding a weight... view full answer...
I have a great hitch for your 2017 Toyota Sienna Premium Limited. It is the Draw-Tite Trailer Hitch Receiver item # 36513. This is a custom fit hitch receiver that bolts directly to your Sienna with included hardware. It is a class II hitch with a 1-1/4" receiver. I have linked an installation video so you can follow along with the process while you install your hitch. There are no concealed hitches available for your van. I have attached a picture of what this hitch will look like when... view full answer...
When it comes to installing a trailer hitch on your 2020 Toyota RAV4 we do not currently sell the replacement brackets for your vehicle. However, The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch # C13416, which is confirmed to fit your 2020 Toyota RAV4, will bolt directly to your frame (see included instructions). If you still wanted the missing bracket replaced, you would need to reach out to Toyota to get a replacement.
The Curt trailer hitch has a bolt-on installation... view full answer...
We don't currently have a hitch ball that has a 2-1/2 inch long shank but we have a couple that might work for you.
The Curt # 40038 is a 2 inch ball with a 1 inch diameter shank that is 2-1/4 inches long. And then the Curt # C40020 is the same except the shank is 3 inches long. view full answer...
We can help you get your 2016 Rav4 ready for towing a trailer with electric brakes.
The etrailer 2-inch Class III hitch # e98864 is an excellent choice for its substantial towing capacity and an install video is included for you. With the hitch you will need a 4-pole wiring harness. You can use the Curt # C56166 that you referenced, but instead I suggest the Tekonsha # 118578 because it can produce higher current output for the trailer lights. Installation is exactly the same as with the... view full answer...
Go To Results