Class II Hitch for a 2017 Toyota Sienna Premium Limited

Question

Question:

Can you recommend a quality hitch for my 2017 Toyota Sienna Premium Limited? Its for a 1 1/4 bike rack. I prefer a concealed installation, that will not be too difficult or expensive. Thanks!

asked by: Peggy B

0

Expert Reply:

I have a great hitch for your 2017 Toyota Sienna Premium Limited. It is the Draw-Tite Trailer Hitch Receiver item # 36513. This is a custom fit hitch receiver that bolts directly to your Sienna with included hardware. It is a class II hitch with a 1-1/4" receiver. I have linked an installation video so you can follow along with the process while you install your hitch. There are no concealed hitches available for your van. I have attached a picture of what this hitch will look like when installed.

expert reply by: Jerred H

0

2017 Toyota Sienna Draw-Tite
(click to enlarge)

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

I recommend installing the Thule WingBar Evo roof rack on your 2024 Toyota Camry. I prefer this roof rack as the crossbars use a 2 piece channel seal which makes it easy to slide in a Kayak Carrier #LR28FR. You will need the Crossbars #TH711420, Feet…

view full answer...

Answer 3

On the Nissan Frontier and other Nissan vehicles, if the vehicle did not come with a factory tow package it will not have a functioning wiring harness even if one, like #118263, is added. There will be relays that will need to be inserted to make the…

view full answer...

Answer 4

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and the…

view full answer...

Answer 5

Yes, the Draw-Tite Max-Frame Trailer Hitch Receiver item #75282 is a confirmed fit for your 2022 Nissan Frontier. It has a maximum gross trailer weight of 5,000 lbs and a maximum tongue weight of 750 lbs. I have attached an installation video and…

view full answer...

Answer 6

The first thing to check on trailer wiring harness #C56035 for your 2009 Toyota Matrix is the fuse for the power wire that connects to the vehicle battery. This harness gets power for the trailer lights from the vehicle battery so if the power wire…

view full answer...

Answer 7

You'd be a good candidate for the Timbren kit part #A12RS440 which is an axle-"less" kit that attaches to the trailer frame directly. I attached a picture that shows how it attaches to a trailer frame. It wouldn't require you to…

view full answer...

Answer 8

I can help you determine which Timbren Axle-less system is the right one for your trailer. If your total trailer weight including the weight of the motorcycle is under 400lbs. then the Timbren #A4WS440 system will be a good fit for you. These…

view full answer...

Class II Hitch for a 2017 Toyota Sienna Premium Limited

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching