Expert Answers about Toyota Tundra

• Roof Rack System to Carry a Kayak and Two Bikes on a 2010 Toyota Tundra with a Truck Bed Shell
• I recommend installing the Rhino-Rack Vortex Roof Rack System onto your 2010 Toyota Tacoma's camper shell. It's a track mount system that comes in black, # Y02-490B. Once you have the roof rack installed you can use the Rhino-Rack Kayak Carrier # S512 for the kayak. This carrier folds down when not in use. Add the Malone QuickLash Hood Loops # MPG308 to make it easier to secure the bow and stern. Then I recommend 2 of the Thule UpRide # TH599000 for the bikes. The carriers can be...
  view full answer...


• Lift Kit for 2013 Jayco Jay Feather Ultra Lite Travel Trailer
• How you would proceed will depend on which type of suspension your camper has, and who the manufacturer of the axle was. If it's a leaf spring axle, and the leaf springs are currently mounted to the underside of the axle, you can use an over/under kit such as part # K71-384-00 for a 2-3/8 inch diameter axle tube. This will allow you to move the spring pack to the top of the axle, gaining you a height difference equal to the axle diameter plus the thickness of the spring pack. If the axles...
  view full answer...


• Parts needed to get 7-Pole Wiring Installed on a 2003 Toyota Tundra
• If you have the Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package # HM43385, the harness will plug directly into the factory plug at the rear of the vehicle near the bumper. You will not need any additional wiring in order to get this installed. If you do not have a factory tow package on your vehicle, I recommend # C59496 and # ETBC7. These will come with everything that you need to get them installed.
  view full answer...


• Parts Needed to Install a Trailer Brake Controller on a 2007 Toyota Tundra with Factory 4-Way
• It sounds like your 2007 Toyota Tundra came with a factory 4-Way so to add a 7-Way and a brake controller, I recommend using the 4 and 7-Way installation kit # ETBC7. This kit will add the 7-Way and provide you with all the wiring you need for the brake controller and to make the 7-Way fully functional. I have included some instructional links on installing an ETBC7 for you. For a brake controller to controll the trailer brakes, I recommend the Tekonsha P2, # 90885. This is one of our...
  view full answer...


• Can Wired Air Lift Compressor Kit be Converted to Wireless Kit
• I spoke with my contact at Air Lift who said that the components in the kits are different aside from maybe the air compressor itself and that it is actually more cost effective to purchase a whole compressor kit than to piece it out. I recommend purchasing the Air Lift WirelessONE # AL25980 and then either selling your whole kit or replacing everything but the compressor (if you have the same one) and selling the compressor that comes with this kit with everything else currently on your...
  view full answer...


• How to Get Replacement Inside Wheel Tray for Thule T2 Pro XTS Bike Rack Keyed Alike
• You can replace the lock core on the # 7524703003 to allow you to have it keyed alike to your other Thule products, but you will need to purchase a new lock core. You'll want to check the number on the front or lock core bodies of your existing cores to confirm the number. For example, if you've got one with the N168 you can use the Replacement Lock Cylinder for Thule Racks and Carriers - N168 # THLOCKN168. I've linked our entire selection of Thule lock cores that are searchable by the...
  view full answer...


• Brackets and Mounting Hardware to Install ProSeries 15K 5th Wheel in 2013 Toyota Tundra
• You have several options for 5th wheel installation kits for your 2013 Toyota Tundra to enable use of your ProSeries 15K 5th wheel hitch. The part you referenced, Reese Universal Base Rail Kit # RP30035-309, is one option. Universal kits like this are cost-effective but require more drilling and take more time to install than semi-custom or custom kits. This kit will work with all bed lengths. If you prefer reduced drilling and install time you may prefer custom install kit # RP50084-58...
  view full answer...


• Parts Needed to Install a Brake Controller on a 2012 Toyota Tundra
• As long as you have a factory 7-way at the rear of your vehicle all you would need is the following part numbers. The Tekonsha Primus IQ # TK90160 and a Tekonsha Plug-In Wiring Adapter # 3040-P. If you have a factory 4-way you will need a Brake Controller Installation Kit Part # ETBC7. I attached installation instructions and an installation video for this product for you to check out also.
  view full answer...


• Correct Explorer Rails for a 2007 Toyota Tundra With an Exisitng Fulll Metal JackRabbit
• The Replacement Explorer Rails for Pace Edwards JackRabbit Hard Tonneau Cover # PE27CV you mention are actually not going to work with your 2007 Toyota Tundra. I did however speak with Pace Edwards, and they said that you'd need to use the Replacement Explorer Rails for Pace Edwards JackRabbit Hard Tonneau Cover # PE45GJ instaed. These rails will work with your current JackRabbbit Tonneau Cover, and will upgrade your standard rails to the explorer rails.
  view full answer...


• Can I Use a Different Camera System with the Voyager Pre-Wiring on my 2020 Atlas Trailer
• I don't believe the part that you're seeking is something that's available as a replacement part of any type, however you should be able to remove the Voyager pre-wiring bracket from your 2020 Atlas trailer and leave the bare wiring. With that bare wiring you could install a Furrion system like the # FOS05TASF. If you already had a Furrion camera you could just use the Replacement Shark Fin Camera Mounting Bracket for Furrion Vision S RV Camera Systems - Black - Qty 1 # FRCBRKT-BL to allow...
  view full answer...


• How to Add Go Power Portable Solar Panel Kit to Trailer with Go Power Solar Panel on Roof
• For your application I recommend using the Go Power Portable Solar Panel with Digital Solar Controller # 34282610. This will need to be connected directly to your battery bank and then uses Anderson Connectors to go from the battery pigtail you'll install out to the solar panel assembly. The Anderson extension that comes with this kit is only 12' long so you'll need the 30' Extension # 34270356 as well. All of the portable solar kits from Go Power come with adapters to make it work with...
  view full answer...


• Needed, One Leg Of A Thule Ladder Rack, Should I Get Each Part Separately Or Get Whole Ladder Rack
• I do have a solution for you, but there will be some things you have to consider. Thule does not sell an individual ladder rack leg. However, they do sell the individual pieces a-la-carte. Under normal circumstances, you would get a ladder rack in one large box with all of the parts separated inside this one package. If you want to go this route, you will be getting 18 individual packages. It might be worth considering just getting a complete ladder rack. The T-Rac Pro2 Truck Bed Ladder...
  view full answer...


• Tire Chains for a 2022 Toyota Tundra with 265/70-18 Tires
• For your 2022 Toyota Tundra with 265/70-18 tires, I recommend the Titan Chain Snow Tire Chains for Wide Base Tires - Ladder Pattern - V-Bar Links - 1 Pair item # TC3829. The V-shaped studs (also known as icebreakers, spikes, or cleats) that are built into these twist-link tire chains bite into ice, providing a better grip for a safer ride on ice-covered roads. The v-bar links will give your Tundra superior traction in deep snow and ice.
  view full answer...


• Trailer Connector for Towing Surge Coupler Equipped Trailer With 2013 Toyota Tundra
• I'll begin with the assumption that your new pontoon trailer has hydraulic surge brakes. This type of braking system uses a hydraulic coupler that compresses when the tow vehicle brakes, and the compression is what causes the brakes to actuate. A trailer like this usually uses a 5 pole flat trailer connector, with the extra circuit being the reverse lock out. The reverse lock utilizes a solenoid that prevents the brakes from applying with you attempt to back the trailer. Otherwise, especially...
  view full answer...


• Parts Needed to Install a Trailer Brake Controller on a 2006 Toyota Tundra with 4-Way Connector
• A 4-Way trailer connector only contains trailer light functions. To use a brake controller, you will need to install a 7-Way trailer connector. If the trailer has a 4-Way as well, it may not have electric brakes. To add a 7-Way and brake controller to a 2006 Toyota Tundra with a 4-Way, you will need a 4 and 7 way installation kit # ETBC7. This will provide you with the 7-Way and all of the wiring required to install a brake controller. I have included some links that explain the ETBC7...
  view full answer...


• Parts Needed to Flat Tow a 2002 Toyota Tundra Behind a Motor Home
• From the research I did it may be possible to flat tow a 2002 Toyota Tundra behind a motor home depending on how it is equipped, What you will need to do is consult the owners manual for your truck to determine if it can be flat towed and if so what the procedure is and what additional parts may be needed. If after you consult the owners manual and determine that you can flat tow the truck, there are 5 items you will need: base plates, tow bar, safety cables, lighting, and supplemental...
  view full answer...


• Trailer Hitch And Wiring For A 2022 Subaru Forester Wilderness
• For your 2022 Subaru Forester, we have the EcoHitch Hidden Trailer Hitch Receiver # 306-X7391 that will fit all models of the Subaru Forester Wilderness. This hitch has a maximum GTW of 3,500-lbs and a maximum tongue weight of 525-lbs. When installed, this hitch delivers a "from the factory" due to its completely hidden cross tube design. If you're needing wiring, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56040 is a great option that is super simple...
  view full answer...


• Longest Available M6 Bolt for Thule Cargo Box
• The longest Thule M6 bolt I'm aware of is the Replacement M6 x 92 T-Bolt for Thule Criterium Roof Mounted Bike Carrier # 853-6511, which is 92mm long and might work for your application.
  view full answer...


• How To Determine Which Spacer Kit Will Work With Your 2006 Toyota Tundra
• When adding spacers to your 2006 Toyota Tundra you will first need to measure the distance between where the brackets would be on your 2006 Toyota Tundra. The spacer will help with the overextension of the bags. The following are some choices: 6-1/2 inch - 7-1/2 inch - # F2536 7-1/2 inch - 8-1/2 inch - # F2366 8-1/2 inch - 9-1/2 inch - # F2367 9-1/2 inch - 10-1/2 inch - # F2370 11-1/2 inch - 12-1/2 inch - # F2374 I attached a review video link below.
  view full answer...


• How to Add Second Wiring Harness to 2018 Toyota Tundra to Power Tailgate Light Bar
• If your 2018 Tundra has wiring that uses a round U.S. Car type connector (like the item shown in the linked photo) then you can easily piggyback a second wiring harness and have both remain active. Most tailgate light bars use a 4-pole flat connector so if this is what you have all you need is part # 118384 which will simply plug in between your 7-way socket and the U.S. Car connector that connects to the back of it. Please check out the linked install video. I strongly recommend using...
  view full answer...