You're on the right track, all the parts you mentioned are exactly what you'd need but may I make a suggestion?
Rather than the # RED44FR Tow-Pro Elite, I'd recommend the # RED24FR Tow-Pro Liberty instead. The primary difference between the two is that the Elite features what Redarc refers to as a user controlled mode, which allows the controller to operate as a time-delayed controller which could be useful if you tow a trailer off road.
If you have zero plans to ever tow your trailer... view full answer...
If you are wanting to remove the factory side rails that run front to back on your 2012 Toyota Sequoia, I do not recommend doing so. These rails were meant to be permanently installed on your vehicle and should not be removed. These rails are bolted and sealed to the roof and water could leak into the vehicle if they are removed and other damage could occur such as denting and scratching on the roof.
If you are wanting to remove the crossbars that run from side to side and attach to the... view full answer...
The Mighty Cord Universal 7-Way Mounting Bracket # A10-9394VP is designed to be used with 7-way connections that do not include a mounting bracket. The Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package # HM11143384 that fits your 2004 Toyota Sequoia is an example of the harnesses that do not include a mounting bracket. They do not include a bracket as it fits on models that came from the factory with a 7-way and the factory bracket is going to be used. view full answer...
It sounds like you just need the track nut/channel nut (whatever you'd prefer to call it), and while they're not sold as singles you can pick up a pack of 4 with the RotopaX Pack Mount Adapter Kit for Rhino-Rack Pioneer Platforms # RR43203. You can use the track nut with any M6 bolt to attach accessories to your Rhino Rack Pioneer Platform Accessory Bars # RR43120B. view full answer...
If you've already got crossbars on your 2016 Toyota Sequoia the RhinoRack Pioneer platform can be mounted directly to those bars, but you'll want to use a different Pioneer platform setup than the # RR75TB with the Backbone Mounting System # RRRFJB1.
I recommend using the Rhino-Rack Universal Pioneer Platform Rack for Crossbars - Aluminum - 58" Long x 47" Wide # RR42115BF. These are designed to fit on round, square, aero and most factory bar shapes, so this will work well for you. view full answer...
In order to install Yakima's Raptor Aero Roof Mounted Bike Carrier Y02093 on your 2006 Toyota Sequoia you will use their Universal MightyMounts # Y03590. These adapters allow the Raptor Aero to fit onto just about any factory roof rack crossbar. I verified this item's fit with my contact at Yakima. view full answer...
We can help you with installation of a brake controller like the reliable and popular Prodigy P3 # 90195 on your 2001 Toyota Sequoia.
You will need to have a working 4-pole trailer wiring harness on your truck in order to start the installation. If you need one you can use # C55246 if your truck has the factory tow package with a square connector (see photo). if not, then you'll use a universal 4-pole harness kit such as # 119178KIT.
All you'll need to add apart from the controller itself... view full answer...
You should be able to connect your cable to the safety chain loop on the hitch of your 2008 Toyota Sequoia. If you do not have a safety chain loop then I highly recommend installing a trailer hitch that has one as it is required by law to secure any trailer with safety chains.
For your Sequoia SR5 I recommend the Curt # 13442 which is a Class III hitch that has a 2 inch receiver opening. It comes with the safety chain loops you are needing and is rated for 6,000 lbs gross trailer weight... view full answer...
There are 2 different MightyMounts that will fit your 2006 Toyota Sequoia SR5 w/ factory roof rack.
The first mount is the Universal MightMount, part # Y03590, which is compatible with the crossbars on your Sequoia and the widest range of Yakima roof mount accessories such as bike racks, roof baskets, kayak carriers, and snow equipment carriers.
The other Might Mounts that will fit your Sequoia include the 23H Horizontal MightyMount, part # Y03523, The 23H mount is mainly for water sport... view full answer...
For your 2016 Toyota Sequoia with the factory 7-Way installed you will need the Wiring Adapter # C51362 for the TriFlex NEXT # C24VV. view full answer...
The Tekonsha Plug-In Wiring Adapter # 3040-P is supposed to have the additional ground strap for your 2019 Toyota Sequoia. This was something that was not always on the harness but was added some time ago as the factory wiring ground was insufficient. This will allow you to properly connect your Tekonsha Prodigy P3 Controller # 90195 to your Sequoia.
While it will look similar to the Tekonsha # 3041-P they are not interchangeable as they terminals are different. view full answer...
We can get you exactly what you need to install the Redarc brake controller in your 2018 Toyota Sequoia. Your Sequoia should have the factory 7-way already, so what you need to add is just the controller, a wiring harness, and a mounting panel to ensure a clean look:
- Redarc Tow-Pro Liberty Trailer Brake Controller # RED24FR
- Plug-and-Play Wiring Harness # RED49FR
- Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob # 331-TPSI-002
The Tow-Pro is a superb choice... view full answer...
Yes. The Surco Safari Rack will fit on your 2004 Toyota Seqouia. For a 2004 Sequoia with raised factory side rails, you'll want to use the Surco Safari Rack 5.0 Rooftop Cargo Basket for Factory Rails - 84" Long x 50" Wide # SPS5084-1101. This is the same Surco # SPS5084 you were looking at only it comes with the Clamp-On Adapters for Surco Safari Rack 5.0 Rooftop Cargo Basket # SP1101 all in one package. These would be the adapters you need to carry this basket. view full answer...
Yes, you can purchase a separate wiring harness and mount for the Tekonsha Prodigy P3, # 90195, that will fit your 2005 Toyota Sequoia.
The wiring harness you will need is # 3040-P. This harness will plug in to your Toyota's factory plug that is located under the dash of the driver's side above the emergency brake pedal. I have linked an installation video that show where to locate plug on a 2008 Sequoia. The location of the OEM harness is in the same location on year models.
The mount... view full answer...
If by 'install kit' you're referring to a wiring adapter like the # 3040-P you'd looked at, then yes you'll need a wiring adapter to install a brake controller on your 2010 Toyota Sequoia with the factory 7-way.
If you haven't yet chosen a brake controller, I'd recommend a proportional model like the Tekonsha Primus, part # TK90160. The Primus is simple to operate, and features a full LED display that will let you know all the diagnostic information as well as power output. You'll also... view full answer...
The Custom Wiring Adapter for Hayes Brake Controllers # HA81785-HBC is the correct one to install a Hayes controller like their Engage Time Delayed Trailer Brake Controller # HA81760 in a 2004 Toyota Sequoia with factory 7-way. The linked videos will give you additional details about these two items. view full answer...
Installation of a 4-Way wiring harness on a 2006 Toyota Sequoia requires a Upgraded Circuit Protected Modulite with 4 Pole Harness, item # C59496. You will need to splice the wires from this kit into the wires behind the vehicle tail lights.
You can then upgrade the 4-Way connector, at any time, by using the Brake Controller Installation Kit, item # ETBC7. This kit includes all of the extra wires, circuit breakers and connectors needed to complete the installation of a 7-Way at the rear... view full answer...
The P3 is a great choice, its controls and display are very easy to use.
You can install the Tekonsha P3, part # 90195 using the # 3040-P brake controller wiring harness. The harness will plug into the factory connector that's located under the dash, to the left of the steering column near the top of the emergency brake pedal. The plug is white in color.
I've linked to an install video that you might find helpful. view full answer...
You will need to provide the mounting hardware to install the Brake Assembly # 18787.
For bolts you will want Brake Mounting Bolt # 7-75
For locking washers you will want a Lockwasher for Brake Mounting Bolt # 5-8
For nuts you will want a Nut for Brake Mounting Bolt # 6-17
I also attached a video of a brake assembly being installed for you to check out also. view full answer...
When it comes to all you trailer lights flashing when you turn on the turn signals it sounds like there is a loose wire or a blown fuse on the vehicle's side. I recommend checking the circuits on your 2022 Toyota Sequoia using The Hook Probe Circuit Tester Kit # PTW2993 which finds electrical shorts, checks polarity and will test voltages.
I attached a review video link below. view full answer...
Go To Results