The part of an Equal-i-zer weight distribution/sway control (WD/SC) system that mounts on the trailer is the spring bar lift brackets, such as part # EQ95-01-5600. The second trailer will need a pair of these installed on the frame.
If the two trailers' loaded tongue weights (TW) are similar (and both are within the specified range for your particular system) and both have the same size coupler then you don't need any more parts. If the second trailer has substantially different TW than... view full answer...
Generally speaking, unless there is a direct plug and play 7 way connector available for your vehicle, you'll be using the 4 way plug as the base for your 7 way connector. The Tekonsha # 118496 is a nice starting point on your 2008 Toyota Tacoma and offers you an easy, plug and play installation; from there, you'll want to use the # ETBC7, which gives you the remaining components you'll need to add a 7 way on your truck. The # ETBC7 comes with all of the wiring and breakers you'll need... view full answer...
The Replacement FootBase # 753-2149 for the Thule Tracker roof rack does not come with any of the hardware included, but those parts are available. I've gone ahead and listed the replacement hardware that is available for you below.
Track Nut # 853-2106
M6 x 17 mm Bolt # 924-0617-15
M6 Washer # 951061254
Washer 951-0613-12
You'll want to reuse Washer 951-0613-12 and Spacer 853-5127 because they have been discontinued. view full answer...
To connect your Tekonsha Prodigy P3 Trailer Brake Controller # 90195 in your 2015 Toyota Tacoma that has the factory tow package you will use part # 3040-P. This quick-connect harness plug in between the P3 and the port underneath the dash. The linked installation video illustrates the process in a 2012 Tacoma. Written instructions are also provided. view full answer...
If your 2005 Toyota Tacoma has the factory tow package then you can use the Custom Wiring Adapter # 3040-P and Redarc Adapter # 331-TPH-017 to install the Redarc Tow-Pro Liberty # RED52VR and avoid splicing into any wiring on your truck. If you have the accessory panels on your truck you can also use the Mounting Panel # 331-TPSI-007 to give your install a custom look.
Attached is a photo from the instructions for the adapter so you can see where the plug should be located. IT shouldn't... view full answer...
We've got just the thing. If you prefer a coiled 7 wire to 4 wire cord, use # RM-164-7 or # RM-98164-7 for the straight cable. If you have the # RM-522 Falcon All Terrain tow bar, the # RM-98164-7 straight cable is designed to fit into the cable guides on the tow bar. view full answer...
Since your 4-Way was installed by the dealer and not from the factory your 2005 Toyota Tacoma will not have the factory tow package. You will need to add a 4 and 7 Way installation kit # ETBC7 to add a 7-Way and the wiring for a brake controller.
I have included some links that explain how to install the ETBC7 kit that should help you. For a brake controller I recommend the Tekonsha P2, # 90885. It is one of our best selling brake controllers because it is easy to set up and easy to use.... view full answer...
Based on my research, the 2001 Toyota Tacoma did not come with a factory trailer connector. However, since you already have a 4-way connector installed on your truck, you will be able to start here for your brake controller installation.
I recommend the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. This is a proportional brake controller with a digital display. It will level automatically when mounted within a 360-degree vertical range. The brake controller installs in your Tacoma... view full answer...
When it comes to hauling your womens EvryJourney 26 inch 7 speed bike I recommend The Hollywood Racks Sport Rider SE2 Bike Rack for 2 Bikes - 2 inch Hitches - Frame Mount # HR1450Z.The sport rider bike rack can hold up to 50 pounds per bike and can carry a bike tire width up to 3.0 inches. The bike rack weighs 54 pounds.
This bike rack has the tilt away feature which will make it easier to load and unload your bikes.
I attached a review link below. view full answer...
I am sorry to hear about your father. It is typically okay to flat tow pickup trucks with manual transmissions, however, the best way to determine if your 1998 Toyota Tacoma can be flat towed is to check your owners manual under the towing section or by contacting your local Toyota dealer with your VIN. I did some research on your truck and found a few owners manuals that say not to tow the Tacoma, but I was not able to locate one for your 1998 Tacoma.
Another reason to consult your owners... view full answer...
I've got just what you're looking for with the Mounting Bracket for 7 way Connectors # 18138 which comes with all of the screws and nuts needed to mount this bracket to your etrailer # e98850 on your 2010 Toyota Tacoma SR5.
If you're looking for an option that doesn't require drilling, the Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long # C57202 is a great choice, and will also fit on the etrailer hitch. view full answer...
According to my research, the 4WD system of your vehicle prevents it from easily being flat towed. If the vehicle has an automatic transmission, a transmission lube pump would be needed. For manual transmission vehicles, you'd need a driveshaft disconnect, neither of which we offer. Additionally, Toyota specifically prohibits flat towing the vehicle on page 226 of the owner's manual. Plenty of folks make the modifications and flat tow the vehicle anyhow, but I wanted to warn you that doing... view full answer...
The Curt Fish Wire Bolt Leader - 1/2 inch # C58400 is the correct fish wire needed to help install the Curt Hitch # C13264 on your 2022 Toyota Tacoma.
I attached a review video link below. view full answer...
Yes we do, The Universal Wiring Adapter for Curt Trailer Brake Controllers, part # C51515, is designed to work with Curt Trailer Brake Controllers on vehicles without a factory brake control wiring harness. These wires will have to be spliced into your vehicle's existing wiring, so there should be no issue with your 2004 Toyota Tacoma.
I have included a product description link, a video installation link, and a video review link below. view full answer...
It's super easy to put a third bike on the Swagman Pick-Up Truck-Bed-Mounted 2-Bike Carrier # S64702.
All you need to do is add an extra fork mount, the Replacement Fork Mount for Swagman Pick-Up Truck-Bed-Mounted 2-Bike Carrier # SP484.
Even though the title says "Replacement" it can also be used to easily add a third bike to this mount. The carrier does lock to your truck, though I do highly recommend securing the investments you made in your bikes by locking them to the carrier with... view full answer...
In order to use Tekonsha Prodigy P2 Trailer Brake Controller # 90885 in your 2021 Toyota Tacoma, you will need to use Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # 3031-P. One end of this adapter plugs into the brake controller, and the other end plugs into your Tacoma's factory plug-in which is typically under the dash. I attached a couple demonstration videos that may help out. view full answer...
The amp draw on the product pages for both the # 118379 and the # C55379 wiring harness is how much draw the harnesses are designed by their manufacturers to handle. The amount of draw will be determined by the lights on your trailer. The Curt is designed to handle a little more than the Tekonsha harness, however they've both been tested on a 1999 Toyota Tacoma like yours. view full answer...
A trailer hitch like the etrailer # e98850 is a Class III hitch (hitches are given a class based on their weight capacity and receiver size) and will attach to the frame of your 2014 Toyota Tacoma, so it will provide a secure connection to your vehicle to tow a trailer. It looks like the towing capacity on your vehicle is between 3300-lbs and 3500-lbs, so you'll want to make sure you don't exceed the towing capacity of your truck with the camper's weight.
The price of the hitch isn't... view full answer...
You are going to need to wire in the Curt 2 to 3 Wire Tail Light Converter # C56196 on your motorcycle carrier. This will allow you to remove the tail lights from the brake light wiring so you can wire the turn signals separately on your carrier. If you carrier uses LED lights you will also need to wire in 3 Resistors # P230004C as the converter was only designed to be used with incandescent lights and will need to see the higher amperage draw with the resistors.
If you need any further... view full answer...
For the Topline Bed X-Tender, # BX4004-01, for the 2003 Toyota Tacoma, you will not need any additional brackets or parts to install it on your truck. It attaches to the tailgate using included brackets and hardware. Take a look at the pictures below the description on the product page to see some close ups of the extender. view full answer...
Go To Results