Mounting Bolt Pattern of Optronics Trailer Light Kit TLL56RK
Question:
I need a submersible trailer light kit to bolt on to my galvanized trailer. Current lights are 8inch wide, 3inch tall, 2.5/8inch deep. The 2inch bolt pattern when looking at the light face on the passenger light: 23/4inch from left, bolt, 2inch on center, bolt, and 31/4to the right edge. I have some room for adjustment on the left edgeinside of light but none on the right edge. Any more than 3.25 on the right, and the light would extend beyond the bracket. Item #TLL56RK has the bolt pattern in the description but the dimensions of the bolt pattern are not listed. What is the minimum distance from the top of the light to the bolt. Do you have any sugestions?
asked by: LeRoy H
Helpful Expert Reply:
The distance between the mounting holes of the Optronics trailer light kit part # TLL56RK is 2 inches like you mentioned needing. The distance from the mounting holes to the top of the light is 1.825 inches.
Product Page this Question was Asked From
LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Reflector
- Stop/Turn/Tail
- Rectangle
- Kit
- Surface Mount
- Submersible Lights
- LED Light
- 6L x 3-1/2W Inch
- Red
- Optronics
more information >
Continue Researching
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible - Driver and Passenger
- Shop: Buyers Products 1/2" Locking Hitch Pin
- Shop: Optronics LED Combination Trailer Tail Lights - Submersible - 40 Diodes - Driver and Passenger Side
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Deka Heat Shrink Butt Connector - 22-18 Gauge - Nylon Insulation - Red - Qty 10
- Shop: Bulldog Lifelong Trailer Coupler Lock - Trigger Latch Style - 1/4" Pin Diameter - Chrome
- Video: Bulldog Trigger Latch Lifelong Trailer Coupler Lock Review
- Video: etrailer.com Flat Lip Trailer Coupler Lock Review
- Video: Optronics LED Combination Trailer Tail Light Kit Review
- Search Results: trailer hubs
- Search Results: buddy hubs
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Video: Optronics Trailer Lights - Tail Lights - TLL56RK Review
- Q&A: How to Splice in Replacement 4-Way Trailer End Connector
- Q&A: Will Optronics Submersible LED Trailer Tail Light # STL56RB Fit a 1987 Shorelander Trailer
- Q&A: Shorelander 5110575 ID Bar Clearance Light Replacement Recommendation
- Q&A: Coupler Lock and Secuirty for Bolt-On A-Frame Coupler
- Q&A: Replacement Taillights for 1994 Shoreland'r Submersible Boat Trailer
- Q&A: Can Passenger Side Optronics Light Be Used on Both Sides of Trailer
- Q&A: Options to Convert Trailer to LED Lighting
- Search Results: lock n roll
- Video: Optronics LED Combination Tail Light Kit Installation
- Shop: Vehicle Lights
- Search Results: light bracket
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
on Trailer Lights
