etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
(28 reviews)
Price: $52.99
etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet
Our Price: $52.99
Customers prefer these similar products
- All Info
- Reviews (28)
- Q & A (0)
- Photos
etrailer Trailer Leaf Springs
- Double Eye Springs
- 25-1/4 Inch Long
- 1-3/4 Inch Wide
- 4000 lbs
- 3 Leaf
- Dacromet
- etrailer
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.
Features:
- Upgrades your trailer's suspension to save you time and money on maintenance
- Excellent for boat trailers or any trailer regularly exposed to salt-treated roads
- Resists rust and corrosion with a dacromet finish that has a salt spray rating of 700 hours
- Mounts to your trailer's existing hangers with suspension hardware (sold separately)
- Constructed of sturdy steel
- Includes nylon bushings
Specs:
- Quantity: 1 leaf spring
- Leaf springs should always be replaced in pairs to ensure proper axle alignment
- Spring capacity: 2,000 lbs
- Axle capacity: 4,000 lbs
- Length from center of spring eye to center of spring eye: 25-1/4"
- Spring width: 1-3/4"
- Eye diameter with bushing: 9/16"
- Eye diameter without bushing: 11/16"
- Leaf thickness: 3/8"
- Number of leaves: 3
- Additional dimensions: see table
- Limited lifetime warranty
| Part Number | A | B | C | D |
|---|---|---|---|---|
| e93SR | 12-5/8" | 13-1/4" | 25-1/4" | 3" |
If you're replacing a busted or rusted-out spring on your trailer - or if you've decided to upgrade to dacromet to avoid rusted-out springs down the line - the first thing you'll need to do is measure your existing leaf springs. Take a look at the measurements above. If these dimensions - and the weight rating - match what you currently have, you should be good to go.
Remember, though, your leaf springs can flatten a bit over time. And if you're measuring your spring while your trailer is fully loaded, the overall length that you get might be a bit more than what you need a brand new, unloaded spring to measure.
Rustproof Your Trailer Suspension with Dacromet
As you travel across highways and backroads, your trailer's leaf springs are going to corrode and flake over time. This is especially true if you have a boat trailer that's regularly submerged in water. Completely rusted-out springs on trailers are all too common, and these dacromet springs are a great solution to that problem.
Longer-lasting springs will save you money and are great for any trailer, but they are a must have for folks who live or play by the water. If you live on the coast, you're probably always rinsing the saltwater off of your trailer to try and keep rust at bay. If you're really worried, you might've even tried to repaint your springs or spray them down with rust inhibitors. But upgrading to these dacromet-coated leaf springs could cut down on or eliminate all of that maintenance, leaving you more time to spend out on the water.
Rust-resistant coatings are graded according to a salt spray rating. Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. We conducted our own salt spray test and found that this dacromet coating lasts up to 744 hours before it begins to deteriorate. Compare that to some other dacromet coatings out there that are rated at just 300 hours - or zinc coatings that don't last for even that long - and you can be sure these springs will last.
Double-Eye Leaf Spring Basics
Leaf springs, as you probably know, make up an important part of your trailer's suspension. Their main purpose is to absorb road shock as you travel, as well as allow your axle(s) to move independently of the rest of the trailer.
To mount this leaf spring, you'll need hangers welded onto your trailer frame - which you probably already have in place - as well as shackle straps and a suspension bolt. It's a good idea to replace your existing straps and bolt while you're under there working on things because they tend to wear out quickly. One thing that could help keep them from wearing out too fast would be upgrading to galvanized or zinc-plated hardware. Doing so will boost the corrosion resistance and, therefore, the longevity of your trailer.
We also always recommend replacing both of your springs at the same time because it's not unusual for leaf springs to sag and elongate over time. If you replace just the one, there's a good chance that it won't match your existing spring on the opposite side of your trailer, and that can mess up your alignment.
e93SR etrailer Double Eye Dacromet Trailer Leaf Spring - 3 Leaf - 2,000-lb Capacity
Compares to SP-220275
Item # e93SR
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet - e93SR
Average Customer Rating: 4.8 out of 5 stars (28 Customer Reviews)
Tired of rusty, flaking running gear on your trailer? Need more corrosion protection for launching your boat or towing over heavily treated roads? Upgrade your suspension with this long-lasting, supremely rust-resistant leaf spring.by: RickeyD02/11/2024
A well constructed, perfectly fitting, beautifully coated, leaf spring for my boat trailer. Shipping was incredibly fast, packaged very well. etrailer makes trailer maintenance much easier. Thanks for the free shipping over $100.00 Thank you, etrailer...
by: Gary 03/07/2024
Great product for my Bay boat upgrade. These Dacromet Coated Leaf springs are the way to go if you use your boat trailer in saltwater. The shipping was super fast, I am impressed on just how fast Etrailer delivered these parts to my Beach house in Corpus Christi Texas. Six Stars on shipping !
by: Wayne 03/19/2024
They look great. Only time will tell if they will last anymore than 2 years. Did not like seeing they were made in china. Shipping was fast. Packaging was fantastic I have always been happy with e trailer.
by: Charles03/31/2024
The Dacromet corrosion coating is holding up well so far. Springs do what they are supposed to. Not much else to say.
by: Tamara 09/19/2023
The folks at Etrailer are very knowlegedeable and very helpful. The are also incredibly prompt with shipping. I placed two orders and both of them shipped out the same day. The springs are good quality and exactly as advertised.
by: A Campbell12/07/2023
Nice coating on this spring. Quick skip great packing greasy price.
by: Kevin 04/02/2024
Quality parts. Like the coating to protect from rust
by: Juan 04/12/2024
Wow! Super fast and quality is perfect!
by: Michael 03/11/2024
Prompt shipment. Good quality.
by: Mark07/28/2023
great service and parts
by: Nick 05/21/2023
Perfect replacement for Alumacraft / Eagle Trailer
by: John 03/02/2023
Delivery was on or ahead of schedule. Installation…It went on as it should. Time will tell relative to strength and quality.
Thanks!
by: Joseph 08/28/2023
Quick shipping. Perfect fit!
by: Chris06/03/2023
Very fast service
by: Mark 04/11/2023
Works perfect
by: David 01/06/2023
Great service!
by: Troy 04/29/2024
by: Scott04/06/2024
by: Max 02/01/2024
by: William 08/16/2023
Love them
by: Christopher 05/11/2023
by: Paul 11/27/2023
by: Steve 03/12/2024
by: Jamyn08/01/2023
by: Charles 03/21/2024
25
28
Show More Reviews
See what our Experts say about this etrailer Trailer Leaf Springs
- Raising Trailer Suspension To Clear Rear Leaf Spring From Hitting The Crossmember It appears you may have installed shackle straps which are longer than what you may have had. It appears your straps are either 3-1/8" # TRSL313 or 3-1/2" # TRSL350 and you likely only need a 2-1/4" # TRSL225. This would move the mounting point closer to the axle and raise the trailer approximately 1/2". To get enough height to clear your crossmember you will likely need the Lift Kit # RR23QX. This will allow you to raise the suspension either 1-1/4" or 2-1/4" to clear your rear crossmember. On...
view full answer...
- Recommended Upgraded Leaf Springs for a 2022 Grand Design 2400BHI looked up the US-1067 Leaf Springs and they re 25-1/4" long so if that's what you need I recommend the 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part # e93SR which are the same length, but a bit less capacity at 2,000 lbs. However, they are still rated for more than the 1,750 lb capacity of your existing springs. They also have a better dacromet finish for more rust protection.
view full answer... - Replacement Leaf Spring Options For a 2021 KZ Sportsman 301BHKSELooking up the information for your 2021 KZ Sportsman 301BHKSE I see that they use axles rated for 4,000lbs. For this we have either the 26" # e48SR or 25-1/4" # e93SR leaf springs. You will need to measure the springs on your KZ to verify the correct replacements. As this measurement is from eye center to eye center with the springs relaxed the easier measurement is measure along the curve of the spring from eye center to center of spring pin. The 26" spring will be 14" while the 25-1/4"...
view full answer... - Replacement 25-1/4 Leaf Springs for a Ranger RT188 Boat TrailerTo replace your 25-1/4" leaf springs on your Ranger RT188 boat trailer I recommend the 3-Leaf Double-Eye Spring item # e93SR. These have a 4,000 lbs capacity and three leafs. They will work great on your trailer. There are a few ways to gain additional clearance between your tire and fender, but going with longer shackle straps won't accomplish what you're looking for. I recommend moving your fender up if possible but you really don't have much room to work with.
view full answer... - Parts Needed to Upgrade from a 2-3/8 Inch Axle to a 3 Inch Axle We do have a 3" axle with a 86-1/2" hub face to hub face measurement. It is the Dexter Axle Beam with E-Z Lube Spindles item # 8327816. The spring seats sit at 71-1/2" so you will need to move them. You'll want to replace them with two of the 3" Spring Seats Item # TRSS300 for each axle. We do not have a 2-3/8" axle in your dimensions. You will also need to replace your u-bolts and plates. You will want the U-Bolt Kit for Mounting 3" Round Trailer Axles item # APUBR-9. You will need one...
view full answer... - Determining The Correct Replacement Leaf Springs For A 2021 Keystone Passport Grand Touring TTYou could potentially replace your leaf springs with a larger capacity spring but will need to match the length of your current leaf springs to avoid having to remove and reinstall the hangers and rest of the suspension system, which is a giant hassle and a lot more costly than just replacing the springs. If you have double-eye leaf springs you'll need to measure from the center of one eyelet to the center of the other. If you have slipper springs then you'll need to measure from the...
view full answer...
- Replacement Leaf Springs For a 2021 Dutchmen Coleman Light 2455BH Travel Trailer CamperYour 2021 Dutchmen Coleman Light 2455BH will have came with leaf springs like the Double-Eye Spring for 3,500-lb Trailer Axles # e54SR. Do remember leaf springs should be replaced in pairs. As you are wanting to move to a stronger spring I recommend the Double-Eye Spring for 4,000-lb Trailer Axles # e93SR. These will have an additional 250lb capacity per spring so you will not be installing springs which are so stiff they cause the trailer to bounce and transfer a lot of shock inside the...
view full answer... - How to Determine Correct 4,000 lb Trailer Leaf SpringsI can help you determine the right replacement double-eye leaf springs for your Keystone Hideout, though we don't have any way of knowing what specific ones you need. It's pretty easy though, as all you need to do is measure your current leaf springs from center-to-center of the spring eyes. Leaf springs also flatten a bit over time, so you should go with ones that measure a bit shorter than what you currently have. For example, if your current leaf springs measure 26-1/4" center eye to...
view full answer... - Replacement For 25-1/2 Inch Leaf Springs on Boat TrailerLeaf springs flatten out over time, so since yours are 25-1/2" center to center, you'll want to go with ones a little shorter than that: - 3-Leaf Double-Eye Spring for 4,000-lb Trailer Axles - 25-1/4" Long - Dacromet # e93SR The # e93SR says for "4,000 lb" axles but that is just their capacity; you said you have 2-3/8" axles, which is a 3,500 lb axle, so this will give you a bit of added strength. You mentioned 3" shackle bolts as well, and for those use # 166081. Then for the U-bolts,...
view full answer... - Troubleshooting 3,500LB Trailer Leaf Springs Bottoming Out & Flattening On 3,750LB GVWR Boat TrailerIf your trailer has a GVWR of 3,750lbs and your boat only weighs 1,460lbs you should be fine with the 3,500LB Leaf Springs # e54SR. I would recommend taking your boat and trailer to a nearby scale to have the trailer weighed to ensure you are under the 3,500lb capacity rating for the springs. This will also help to ensure you are not overloading the trailer which could create a more catastrophic problem. While you could go to heavier springs like the 4,000LB # e93SR this would most likely...
view full answer...
Do you have a question about this Trailer Leaf Spring?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Justice A
Written by:
Mike S
Installed by:
Michael B
Installed by:
Jacob H
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.