Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Ideal for multiple agricultural and commercial applications, this corrosion-resistant, A-frame jack features a 7" retracted height and measures 14-1/2" from the mounting bracket to the top, excluding the handle. Base sold separately.
Features:
Specs:
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (471 Customer Reviews)
Ideal for multiple agricultural and commercial applications, this corrosion-resistant, A-frame jack features a 7" retracted height and measures 14-1/2" from the mounting bracket to the top, excluding the handle. Base sold separately.Well made and sturdy. Cranked the jack to fully extend the tube and noticed that during the entire mid-range of extension the cranking was very stiff. It was much easier near the limits (fully retracted and fully extended). Hope this doesn't become a problem under load.
Using the "Bulldog Round, A-Frame Jack - Sidewind - 13" Lift - 3,000 lbs" in combination wth the
"Drop Leg for etrailer & Ram Jacks - 13-1/4" Tall - 5-1/4" Diameter Footplate" allows me to run this jack, without the drop leg attached, flush with my trailer frame for better off road clearance, and with the drop leg while taking the trailer off the vehicle, minimizes turning of the jack.
This jack works much better than the poor quality original one from china. It gives you more ground clearance and is strong enough to pick up the trailer.
GREAT JACK TO WORK WITH, I RETROFIT IT FOR MY RESTORED VINTAGE TRAILER. WHAT A IMPROVMENT OVER THE ORIGINAL HADCO STRIPPED OUT JACK, WELL AFTER ALL THE ORIGINAL WORKED FOR OVER 40 YEARS IT SERVED ITS TIME.
Thank you for your inquiry. I just yesterday found time to install the Bulldog jack. The package shipped and was delivered earlier than promised, which was a pleasant surprise. I was impressed with the quality of the jack just taking it out of the box. I am more impressed with it on my trailer (Boatmaster with 17.5 Key West Stealth). It operates smoothly and with minimal effort. I chose to store the boat trailer on blocks rather that use a jack wheel as the wheel hangs too low when towing and installing and removing it is just another task I prefer to avoid. This jack replaces one ten years old used primarily in a salt water environment. It is a very good product. I did attach a picture of the jack.
Product shipped in an extremely timely manor and arrived undamaged due to the quality of packaging. This Jack fit the front of my travel trailer (not commercial) just fine and only took minutes to install. My local trailer parts store was selling tongue jacks of half the capacity for nearly double the price. This was an awesome find and I'm glad i chose etrailer for my purchase. I did not rate 5 of 5 only because I have not had a chance to operate the jack.
Great product wish the had the same exact model except a liter duty for a little cheaper. 3,000 pound lift weight is a little over kill for my 6.5 by 12 foot utility trailer. Like how it fits nice and snug under the frame.
The one it is replacing was awesome and was used for a long time. Haven't taken my sailboat out of the driveway since 2021. 2022 was the first year since 2012 I haven't gone out of state to work and live on my sailboat. So I haven't even put my new A frame jack on yet. still sitting in the box.
This trailer tongue jack is high quality. The perfect replacement for the original jack. Fits exactly. Solid heavy duty packaging ensured this jack would arrive without any issues. Thank you for the quick shipping! Ordered it Sunday night and it was shipped out monday morning. Thanks again!
Chris
12/14/2020
One year later and still working like new. Excellent quality!
The tongue jack fit perfectly with bolt on instalation in a very short period of time. The tongue weight and ease of lifting is very convenient and the operation of the jack is simple and matches the trailer application.
Nice doing business with your organization!!!
Alan
9/26/2015
I have used the product repeatedly on my camper. The jack functions great, its a rugged product and durable. I would buy again if the need arises.
So far, so good! It replaced the factory jack on our RPod 172 that broke and was very easy to install. The Bulldog folds up a little smaller for better ground clearance and has a smoother, easier lifting action. Great purchase!
Goin C.
1/11/2018
Still going strong. The Bulldog is working out as well as you could hope. No complaints at all.
BOUGHT ONE OF THESE A YEAR AGO OR SO FROM HERE. AND PUT IT ON MY VINTAGE TRAILER.
LIKED IT SO MUCH WHEN I GOT MY NEW TRAILER I REMOVED THE NEW TOP WIND JACK AND REPLACED IT WITH THIS SIDEWINDER SAME JACK SO I COULD HAVE MORE USABLE ROOM ON THE V-NOSE TRAILER TONGE AND BOUGHT THE CASTER FOR IT ALSO, AND IT WORKS GREAT..
Part fit perfectly on 20 year old Haulmark trailer. Customer service rep. was very helpful in making sure I got the right part.
John H.
5/25/2021
Great works perfectly. Fits in exactly the same spot.
Perfect replacement and it bolted up in two minutes. I can raise and lower my 26' travel Trailer with one hand. Very pleased with the purchase!! The footplate (#PS1400700340) mounting pin hole did not match up though. I will have to drill a new hole for the pin if I want to use it. Not a big deal and am still happy with the service I received and the purchase. Kimberly D. was a great help in finding a replacement for the one I originally ordered that was unavailable. Etrailer has won my future business as well.
The jack is very well made. I changed over from the original top crank jack on our 2005 Casita travel trailer to the Bulldog Side Crank A-Frame Jack which has a smoother mechanism and will be much easier to use. No drilling necessary as it aligns with the existing holes. I gave it a four because they did not include mounting bolts.
A friend installed one of these on his 2013 Casita trailer and feels it is a big improvement over the jack that came with the trailer.
After trying for several weeks to find a replacement jack for my travel trailer I was able to work with your customer service department and get a jack for it. All I was able to find earlier wouldn't fit in the hole in my tongue. I am very pleased with the product.
The trailer lift is still going strong after a year. I keep the the trailer outdoors and the is a minor discoloration at the top but no other visual issues. The turn mechanism is still as smooth as when installed. Very happy with the item.
Much better than my original: Since this is geared, it is easier to crank when there is a large load on the trailer. It also seems more robust and durable than my OEM jack.
overall good product, no problems with installation, worked well out of the box, castor wheel fit easily, One thing that would be nice, is a strap to hold the handle in place when the shaft is retracted, this would hold it still and prevent it from swinging around when driving down the road, will probably make one out of velcro. Overall, no major grumbles.
Amazing product at a reasonable price. Shipping was fast I installed my alert and saved 2/3 of what a trailer repair would have been.
Finding my exact fit and features was easy.
Thank Zhou E-Trailer
The A frame jack and caster are on the trailer with minor drilling to align with existing trailer holes..This is a rugged high quality jack and caster...I ordered the jack Sunday nite late PM and it arrived on thursday here in Boston, how much better service can you get ? Quality product, fastest shipping and excellent communications from etrailer.com.
Works great! A definite upgrade from the original Jack that came equipped with my 16’ cargo trailer.
Built heavier than I expected for the money spent. Cranks up and down with ease. Made my decision from reading reviews on this site. Cheaper buying here at etrailer.com than AMZN, even though I paid shipping here. Seeing a picture of it on the same style trailer that I was intending to mount it on, assured me that I was making the right choice. This was my 1st purchase through etrailer.com, but not my last.
Has worked flawlessly. I replaced the original jack which had a folding leg with this drop leg model. Much better design! No worrying about it dragging. It tucks out of the way nicely.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Munster
1/26/2015
STILL WORKING GREAT... WHEN EVER I MAY NEED ANOTHER REPLACEMENTS FOR ONE OF MY TRAILERS THIS WILL BE THE ONE I WILL REPLACE WITH ONLY REGRET IS THAT I SHOULD HAVE BOUGHT ONE OF THESE A LONG TIME AGO. SOOO NICE.