Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
The graduated level takes the guesswork out of RV leveling with numerical markings to indicate the amount of adjustment needed to raise or lower the trailer.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we'll be taking a look at the Hopkins Stick-on Graduated RV Level, part number HM08525. The Hopkins Graduated Level is a great solution for leveling out your camper or RV. It features an elongated arch reflective bubble level with numerical markings that indicate, in inches, how far you need to raise or lower your trailer. The kit comes with two levels, so you can easily level out your front-to-back and side-to-side. They measure three and three quarter inches long by an inch and a half tall. Now that we've gone over some of the features of the level, I'll go ahead and show you how to get it installed. Now first thing we need to do is make sure that our trailer is level front-to-back and side-to-side.
Here on the side of our trailer, we'll need to find a fixed point. We're going to off the top of our trim right here with our carpenter's level. As you can see, we're slightly out of level front-to-back, and we're going to have a buddy go up front and lower our trailer. Yup, that's good. With the front-to-back taken care of we're going to go ahead level out our side-to-side.
We're going to come up here to the A-frame of our trailer. Now, with the level on our A-frame, you can see that our side-to-side is slightly out of level. We'll go ahead and have a buddy adjust our stabilizers. Little bit more. There it is. Now, with our camper level, we can go ahead and stick on our new Hopkins Graduated Level.
First thing we want to do is make sure that our area is nice and clean so our adhesive gets a good grip. I've already gone ahead and removed the adhesive strip on the back, so we'll just need to place it nice and slow and make sure the bubble remains center with the zero and then, we can stick it on. Now, it doesn't rightly matter where you stick it on your camper just as long as you know that it's level. And we've got it. Now that our front-to-back level on, we can go ahead and grab our next one, and this is going to be our side-to-side. First thing we need to do, like before, we'll need to go ahead and wipe that down.
Make sure it's clear of any dust or debris, that way our adhesive gets a good grip. Same thing as before, just make sure it's in with the zero . or lined up with the zero rather. All right, that looks pretty good. Now, if you'd like a more permanent mount for your level, we've got two optional screw holes that you can use. You'll just have to provide your own hardware. That's going to complete our look at the Hopkins Stick-on Graduated RV Level, part number HM08525. .
Average Customer Rating: 4.7 out of 5 stars (269 Customer Reviews)
The graduated level takes the guesswork out of RV leveling with numerical markings to indicate the amount of adjustment needed to raise or lower the trailer.As expected, used these on previous tra ilers.
Makes leveling an RV so much more easy. Stick them near the front of the RV and easily check them as you are placing the RV and adjusting the tongue jack.
Decent. They will keep me close to leve l.
had them before they are great
We really appreciate how fast we receive products from etrailer. We will always go to etrailer first to purchase our products.
Thanks
Look much better than some of the ones I can buy locally.
Very helpful when leveling our trailer
I had these before on my other trailer and worked quite well, I imagine these will do the same.
Levels are great. Better than I expected. So I orders 2 more sets
Morris
7/2/2023
The levels have been nice to have. Not every parking area is level and having the levels on each leg allows for us to level them out as close as possible
I use this every time I set up my tow-behind. It is so convenient to to check the front of the trailer right behind my tow vehicle for lateral level and the front side of the trailer as I set up the jack at the hitch.
Don
12/1/2020
I have been using these bubble levels for a year and I love them. Set up on the forward corner of the trailer. They allow me to know walking back from the tow vehicle I know if I needs to level the sides and from the hitch jack I can see the fore and aft level.
Super healed up, easy to install
Makes for a quick eyeball for level, which we found quite important for proper sink drainage.
Works great and easy to install and stays in place.
I had to replace one of these that I lost on my travel trailer. I guess the adhesive just got old. I liked the visibility of these as opposed to my old ones ,I replaced both of them. I put screws in these so that I won't loose them.
Eugene H.
7/17/2018
The glass part came out on the front one. Now need to replace. Used screws so that part is still there.
I bought these for our camper 1 year ago and they are still attached and work great. We camp in a lot of places where the ground is very uneven and need the levels for accuracy for the camper. These replacement levels are high quality and I highly recommend them.
Alan V.
7/25/2017
Still working top notch! Still camping in the boonies where the ground is very uneven and need the levels. Still giving etrailer 5 stars!
Works perfectly and I like the clear elbow so that you can see when the water runs clear.
They work excellent for leveling smaller trailers. Takes the guess work out of setting up my pop up with the marked inch indicators. Quick setup and flawless roof lifts with a level base!
My go to source for all trailer needs. Customer service makes sure so order the right part first time!
Exact replacement for my broken trailer level. As always, e-trailer has prompt shipping and quality products.
Ron I.
4/20/2016
Product still functioning as designed. No complaints.
These are inexpensive and easy to read from a distance which is what I was looking for. There are so many of these bubble levels on the market it was difficult to choose from online pictures. I used the supplied self stick adhesive tape to mount after leveling my camper and checking it with a level attached to the frame and not the camper itself. The bubble is fairly sensitive so mounting is a bit tricky with the tape as there is a bit of flex that the tape allows. I will use these to get the camper close but will also keep a small level with me when I travel.
If you're looking for a quick visual reference to you travel trailers state of level, these work well.
Levels are the same as the ones on my last camper. The liquid inside is just thick enough to make the bubble move just a little slower than water so they are stable. The sticky tape seems to hold nicely but I still used some glue to assist. Overall a very good item for the price.
Shawn
10/13/2020
Still working perfectly
Easy to apply. There are reports of them fading but at the cost I don't mind replacing them once in a while.
Great price and fast shipping. I had these levelers on my old camper and I just had to install them on my new camper. It makes it so easy to level the camper as you know just how many inches of raise you need from side to side, and front to rear.
Joe
3/4/2015
They are still working just fine and I still like them as much as the first day I put them on. It makes it real easy to estimate how many inches you need to raise or lower the camper.
I bought a used pop-up camper that had original tires. I checked the cost of tires and mounting on the rims locally and found that for $10 more per tire I could buy already mounted units from etrailer. Reviews indicated that others that had done the same thing were highly satisfied. They were shipped quickly and in only three days of ordering them, they are mounted on my camper. Etrailer had already emailed me to let me know they were on their way and that they were ready to help if I had any problems with the order or the product. Great company....I highly recommend them.
I've used these same Hopkins Stick-on RV levels on all my RVs and Enclosed trailers. They are very accurate and easy to read. The sticking material has never come lose over many years of use. I especially like the fact that although they include holes to screw them in place, it is not required. Therefore, no holes in the trailer. Furthermore, they are calibrated in such a way that they will also tell you how many inches your trailer, RV, etc. needs to be raised or lowered to reach level. Therefore in terms of forward or rearward lowering/raising calibrating, always attach them to either the very front or very rear (as much as possible) of your trailer/RV for best results. This is not to say they don't work in any other location, because they do, it's just easier to determine how far you are off in terms of forward and backward when the level is at either far end of the trailer.
Do you have a question about this RV Level?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don
4/18/2023
This so simplifies setting up in a campground. I have them glued to the left front and front left side and I can slip out of my PU and check level very easily.