Short Trailer Jack Recommendation for a 7000 lb A-frame Horse Trailer for Tailgate Clearance
Question:
Im looking for a shorter trailer jack for a small horse trailer. My current one fits an A-frame and measures 15.5inch from the bracket to the top. I dont know exactly the weight rating, but the GVWR of the trailer is 7000 lbs. Ill be pulling the trailer with the tailgate down to fit a truck camper on, and the top of the trailer jack is the only spot that could hit when backing up in a tight spot.
asked by: Travis
Expert Reply:
I went out to my warehouse a pulled a few different jacks that I think will work for you. The Bulldog Round, A-Frame Jack, # BD1550101344, measures 14-1/2 inches from the bracket to the top of the jack, but you will lose an inch of lift with a 13 inch lift. You do, however, gain an increase in weight capacity at 3,000 lbs with this jack.
Our best option may be the Pro Series Round, A-Frame Jack, # PSRV20000103. This jack measures only 13 inches from the mounting bracket to the top of the jack and has a 14 inch lift with a 2,000 lb weight capacity.
I have attached links to each of these products for you to check out.
Products Referenced in This Question
Bulldog Round, A-Frame Jack - Sidewind - 13" Lift - 3,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 2001 - 3000 lbs
- Sidewind Jack
- 13 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Bulldog
more information >
Pro Series Round, A-Frame Jack w/ External Gearbox - Sidewind - 14" Lift - 2,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- 14 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Pro Series
more information >
Product Page this Question was Asked From
Bulldog Round, A-Frame Jack - Sidewind - 13" Lift - 3,000 lbs
- Trailer Jack
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 2001 - 3000 lbs
- Sidewind Jack
- 13 Inch Lift
- Bolt-On
- Weld-On
- No Wheel or Foot
- Bulldog
more information >
Continue Researching
- Shop: Pro Series Round, A-Frame Jack w/ External Gearbox - Sidewind - 14" Lift - 2,000 lbs
- Shop: Ultimate Trailer Jack - A-Frame - Topwind - 27-1/2" Lift - 2,000 lbs
- Q&A: Measurement From Outer Tube Of Pro Series 2,000 Lb Trailer Jack To End Of Handle
- Shop: Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1
- Shop: Demco Slide-Lok Trailer Coupler - Adjustable Channel Mount - Primed - 2-5/16" Ball - 12,500 lbs
- Shop: Trailer Valet JXC Trailer Jack w/ Footplate and Drill Powered Option - A-Frame - Sidewind - 2K
- Search Results: tekonsha 9030 brake controller
- Search Results: e5115
- Shop: Round, Pipe Mount Swivel Jack w/ Footplate - Weld On - Topwind - 15-1/4" Travel - 7K
- Search Results: 91030
- Q&A: Baby Moon Hub Caps for 5 Lug Trailer Wheels
- Shop: Phoenix USA Baby Moon Hubcap - 10-1/2" Diameter - Stainless Steel - Qty 1
- Video: Review of Demco Trailer Jack - Camper Jack - DM03646
- Shop: Brake Controller
- Search Results: 5~57
- Search Results: trailer brake controller
- Search Results: tool box
- Search Results: 23~402
- Shop: Trailer Wiring
- Q&A: Baby Moon With 9-3/8 Inch Diameter Compatibility with Dexstar Conventional Steel Wheels
- Q&A: Length of Bracket To Jack Bottom and Bolt Hole Distance On Center for A-Frame Jack # PSRV20000103
- Video: Pro Series Round A-Frame Jack Review and Installation
- Q&A: Recommended Made in the USA A-Frame Trailer Jack
- Video: Dutton-Lainson Removable Wheel for A-Frame Trailer Jacks Installation
- Video: etrailer Round A-Frame Trailer Jack Review tja-2001-b
- Q&A: Dimensions of the Pro Series Round Pipe Mount Swivel Jack with Footplate
- Video: TruRyde Trailer Bearings Races Seals Caps - Bearings - BK3-300 Review
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-35-SA Review