To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Fully welded Chevrolet Traverse trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Features:
Specs:
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Tech Tip
Fascia door panel must be removed for hitch installation and may not be able to be reattached. No drilling required for installation , Do not cut or splice vehicle wiring. Only use approved T-One or see auto dealer for trailer tow wiring kit
California residents: click here
Complete Towing Package for 2010 Chevrolet Traverse
2010 Chevrolet Traverse Owners Who Purchased This Trailer Hitch Also Bought...
Replacement Parts Available For This Product
Popular Traverse Trailer Hitch Accessories
Average Customer Rating: 4.9 out of 5 stars (1717 Customer Reviews)
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.I blindly ordered a Draw Tite receiver for my 2011 Acadia - based upon reputation. Had it installed and it cost me $100 do have it put on. Recently weather allowed me to proceed to installing my long term (CURT) 2 inch Ball bar with 2 inch ball into the Draw Tite receiver for work needing to be done and found that it would not allow inserting unless use of sledgehammer.
I attempted to file down the misaligned (welded on) collar that was forcing the misalignment and was not able to make to make it work.
Nichole at etrailer worked with me and replaced the Draw Tite receiver and I found the replacement was properly aligned and my Ball bar does now fit properly.
So - presently had over double the cost for the defective unit and replacemetn that I should have. Being 82 year old I can no longer perform the task of handling this work.
Came 2 days early, didn't take my money till they ship it. Plus I never like to order anything online because I'm afraid it won't fit. But they said it would an it did( 2016 chevy traverse). Also it says 45 mins to install. Sounds About right 10 mins asking the wife an kids to help hold it up with no luck, 10 mins looking for my tools 18mm & 3/4 wrench,10 mins looking at the picture of the instructions because what GUY really reads it? lol, 10 mins putting it on by myself laying on my back in the driveway using my leg to hold it up & 5 mins putting on 1 bolt by the muffler because I didn't read the instructions an lower the muffler out of my way hahahah. P.s is you have soft hands I suggest wearing gloves an waiting for the muffler to cool off because i didn't ??. But all in all it was easy & fast to put on even if your by yourself. Definitely ordering again if I need anything for her car. Thanks etrailer
Smooth process. Super fast shipping (1-day). I recently contacted etrailer to help me set up tax exempt as I am the commander of our local AMVETS post. I hope to do business again soon as we have many veterans in need of both hitches and cargo carriers for their mobility scooters.
Went on great. I live in a state that uses road salt so I had to tap out the threads due to rust. Undid the exhaust hanger mid vehicle to get room to do that.
The fascia door/cover does not fit over the installed receiver, which was a bummer. Would have gave it five stars if it did. Pretty easy project. Getting the exhaust hangers off was tough and took the longest time of anything.
I received this Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" back in December and just installed it yesterday.
The hitch came with all mounting hardware including instructions. I went online to review the install video which I recommend to any DIY's it was very helpful. It took more than the 45 minutes that was quoted but that was because of the factory frame nuts were rusted and trying to tap them was difficult because the exhaust would only drop a few inches. All in all it was a fairly easy project for a 68 year old to accomplish.
I would recommend this product.
The Max Frame Trailer Hitch receiver custom fit Class III was as advertised. All of the parts came at the same time and the installation was very easy. I would recommend watching the installation video as well as following the instructions. The nice advantage was the molded cover on our 2017 Buick Enclave fit directly over the receiver so it was perfect fit. I would recommend this type of hitch to anyone thinking of paying a high price to have one installed.
Dutch S.
3/21/2019
Working great no issues
One of my key concerns was that several vendors apparently ship these trailer hitches unwrapped and without a box. I was pleased to find that the hitch was nicely packaged with the parts nicely secured.
I found the video very helpful, and I completed the installation in less than an hour. Using a ratchet strap to secure the mufflers made the job quite simple. I did have help holding up one side of the hitch while I started the bolts, but other than that it was largely a solo effort. My Enclave has only been through one winter, and the bolts threaded in after minimal cleaning the threads with a shot of WD40. The four rubber muffler hangers popped off without use of lubricant or a pry bar.
Oh, by the way I took advantage of the low price guarantee. Etrailer provided the price difference plus 10% before the item even shipped. I almost felt guilty about getting a credit when I found a lower price from a lesser vendor. Etrailer has been extremely responsive, and I couldn't be happier with the whole experience.
Dave
6/18/2016
I went back and refreshed my memory last years review, and I am still satisfied today. The hitch looks the same as when I installed it a year ago.It was a great value and buying experience, and if I am in the market for trailer accessories, I will be back.I think that the etrailer business model of including customer comments and informative installation videos would translate well to other parts markets.
Ordering was easy and receiving my order was very quick . The receiver kit was complete and well packaged . I will install it in the next few days .
I bought this hitch after watching the installation video on the Etrailer website. It was easy to install! I installed this in my driveway and it took me about 45 minutes. Etrailer provides great installation videos and product information so you can make an informed decision. If you can work a ratchet and socket, you can install a hitch! Great information! Great product! Great company! Thanks!
Rich N.
12/15/2017
Everything is working great! Your array of products, variety of vendors and installation videos are outstanding!
I received the hitch, ball mount and wiring for my 2012 Acadia within just a couple of days after placing the order. The entire order was well packed in very heavy cardboard and was still in good condition upon arrival. I finally got around to putting it on today and as some others have indicated taking loose the muffler hangers and reinstalling them is probably the worst part of the job. I used some of my wifes vegetable spray and that helped a great deal. I did need my wife to help hold up on the hitch as I got the bolts started so we made a family project out of it.
Harry E.
4/10/2014
Yes, we still like that the hitch has the capability of being hidden withthe optional cover that we purchased for our 2012 Acadia. We will be using it again shortly to trailer our golf cart up to the campgrounds.
Excellent service. Hitch was overnighted, on time and installation was straight forward. I will recommend you guys. Thank you all
Install was easy on 2014 Buick enclave. Super happy with it.
Perfect fit on GMC acadia 2008. Easy to install, thanks to the instructional videos. Distance from center of 5/8 pinhole to farthest part of bumber is around 5 inches. There is also a 1/2 hole. Arrived on time. Perfect fit with mounting bracket 18144. Wiring harness 118451 was also easy to install.
Will
8/12/2015
Neil, did your hitch cover go back on?
I was fortunate that this fit so well and was easy to install on my 2017 Traverse.
No problem putting on the Hitch our 2012 Enclave. My wife did not want the hitch to show. Done some research and found that GM has a fisacia insert that takes the place of the one you remove. GM part # 25775358. A little pricey but worth it.
Anonymous
12/17/2013
Just got a 2014 Enclave. Thinking to buy the same hitch. Based on the video, it seems the orig. rear fascia door can be re-installed back. Why did you not put back the orig. one? Its not possible or you dont like the orig. fascia style? Or, only 20132014 enclave fascia door can be reinstalled? Thanks.
Tom G.
12/17/2013
It is my understanding that the 2013
Tom G.
12/20/2013
You are correct, or at least that was my understanding from Pecks Trailer Hlitch installation. I just know my fascia would not go back on, the hitch is very hard to see anyway Just my wifes car and she did not want the hitch to show.
Snowshovel
4/21/2014
Thanks all for the comments. Spring is coming. Ordered and got the hitch installed on my 2014 Enclave. the orig. fascia door can be re-installed wo any problem.Happy!
Installed on a 14' Buick Enclave. etrailer has fantastic instructions and support I knee what had to be done before hitch arrived. No surprises and was able to tow from TX to WI with no issues. Took about an hr to install by myself without lifting car. Also took pictures to document process.
I did have one minor issue when I arrived at the trailer rental place and running lights didn't work. A fuse blew after 1st trip with it. Replaced and haven't had issues since. Very minor and don't think reflects any negativity onto quality of product.
I also highly suggest purchasing plug clip mount with this hitch. If not the plug is dangling and it's not expensive to add the mount. Glad I did and it looks nice.
The online purchasing process could not be any easier through etrailer. I also received emails from etrailer when the product was shipped and they even sent me an email once they were informed that the product had been delivered to my house. Pretty impressive.
The packaging of the product was exactly what I would expect. Many reviews from others had mentioned suppliers that have shipped their product without any boxing material and the product showing up being damaged and parts missing. etrailer packages their products in a very durable packing box, the product is mobilized with additional packing material inside to prevent dings and damage, and all of the mounting hardware and instructions are sealed in a bag.
Assembly could not be easier. eTrailer has created a great You Tube video at https://www.youtube.com/watch?v=mEqrluxIw5o which made installation a breeze after watching this. I had my 4 yr old daughter help me with the installation (She held up one side of the hitch while I started the bolts on the other side), I dropped the muffler for easier access to the vehicle’s frame mounting holes on one side, and I used the handle nuts that were provide by etrailer to install the bolts through the predrilled holes in my Acadia which made the rear bolt install quite easy. The hitch fit perfectly without any interference and the 2016 Acadia's cover also fits back on my vehicle to hide everything while the hitch is not in use. I timed the entire installation process and it only took me 16 minutes and 10 seconds.
etrailer provided clearance measurements for the mounting of accessories which gave me confidence that my cargo carrier would fit. My cargo carrier fits into the hitch perfectly, there is ample clearance between my carrier and my vehicle, and there is enough clearance around the hitch to use a locking hitch pin.
You really cannot beat the quality of this product, the easy of ordering from etrailer, the efficient and professional shipping process that etrailer has created, and the ease of installation for this product.
I put this hitch on in about 45 minutes single-handedly -- no, really, I am 7 weeks out from rotator cuff surgery and I found it easy to install using mostly my non-dominant arm. It's that easy! On the Traverse, it is truly a "hidden hitch" -- see pics. I used this hitch in conjunction with the Curt C56245 wiring harness and TrailerMate TM76470 mounting bracket. Each of those products work perfectly with this hitch. I would not change anything, this is a perfect setup.
I received the hitch in the mail a few days ago, and I must first say that the packaging was very good. The hitch was well protected and boxed up nicely, with no loose parts anywhere.
The instructions were fairly easy to follow and installation took about 1 hour. It could have taken less time if I had a lower profile torque wrench. The distance between the top of the muffler and the bolt was less than 2" and the height of my torque wrench and socket were more than that. So, in my case, it took me hanging on the muffler to make enough room to get the wrench in between to tighten the bolts to specification. As I said before, I didn't have the proper tool so I used what I had.
For the 2012 GMC Acadia, the installation used 6 bolts, 6 cone washers, 2 spacers, and 2 handle nuts. The plastic bumper cover and the rubber muffler vibration mounts are the only things that need to be removed for the installation.
Overall, it seems like a well-built trailer hitch. I look forward to many years of use!
I was happy to see such a great price. I am very happy with this hitch. I can tell it is strongly made and has a great weight to it. Before I post pictures of the final result, I will say before I could i install, I inspected the factory holes and since its a 2009 Acadia and was not weather proofed from day one, there were all rusted and half the threads were gone. So I had to go to Harbor Freight and buy a tap set and make the rusted out threads new again. If you have to do this, be patient and be sure you go in straight from the start. Then as you go and give it a few turns, back it out and clean off the gunk metal shavings and be sure to put some sort of oil on it to prevent getting seized and lubed for cutting new threads. Once I did that, the bolts went right in. Far as installation steps, the video on the website was very helpful. Dont worry about the ones that come in the box. One pointer, use jack stands to support the muffler when you remove it out of the hangers. After all was done, I zipped tie all the wiring on the up side of the hitch and out of site. It all looks great!
Bolts right on perfect fit. I had to clean up weld bolts on the vehicle.
i bought the hitch package, hitch, harness and ball mount. the
materials are first rate and well made. installing the hitch took less
than 30 minutes. instructions said to drop the muffler on the
passenger side rear for access to the holes, but on the 2009
traverse i had room without dropping the muffler. the wire harness
took a couple hours thru no fault of the product. i had trouble getting
one of the taillight assemblies out. very happy and recommend the
product to anyone. thanks much!!!!!!
Ordered the hitch from etrailer Tuesday night, the day we picked up our 2009 Enclave, and it was dellivered on Friday(!), but I had to wait for a warm day to do the install. After the hitch was delivered, etailer sent me link to a review and resource page, with an installation video of the Englave. Watched the installation video, then watched it again to make sure I picked up on every detail. Installation went as smoothly as predicted, despite working on my back, with the rear end (of the Enclave) up on ramps. Took me about an hour, but then I hadn't installed a Hidden Hitch since our 1995 Olds 88.
Product and service from etailer are great!
I installed this hitch on my 2013 GMC Acadia myself in about 30 minutes with absolutely no issues whatsoever. When it was completed, the plastic bumper fascia cover was able to be re-installed, so the hitch can be totally invisible when not in use. (see photos)
Their website has "How To" videos which clearly demonstrate what to expect during the installation process. The hitch came with all necessary instructions (illustrated) and hardware.
These people at etrailer.com are incredible! They communicated with me from the instant I submitted my order until it was delivered so there was no uncertainty about when I could expect the product to arrive. Just an excellent experience all around. Thanks !!!!
The Drawtite 75528 Hitch works great. Had to drop both rear mufflers to get the bolts in and torqued. Bent the plug-in bracket and mounted it upside down. Also mounted plug upside down. This allowed me to re-install the bumper cover hitch door.
Do you have a question about this Trailer Hitch?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Michael
7/1/2020
Still working great