Towing a 4,500lb Jayco Travel Trailer With a 2012 Buick Enclave and 2013 Toyota Highlaner
Question:
My daughter and my son-in-law 2 separate families want to tow the same travel trailer. It is a 4,500 lb Jayco, single axle with drum brakes. They both need the hitch, wiring, and brake controller. One car is a 2012 Buick Enclave without the factory wiring. The second is a 2013 Toyota Highlander again without any factory wiring. Im thinking ease of wiring is best without using Bluetooth. Can you make recommendations for the hitches, wiring package, and brake controllers? Thanks
asked by: Rob V
Expert Reply:
I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 75528 for your 2012 Buick Enclave. This will install without any drilling or trimming of panels, but the door panel on the rear of the Buick will need to be removed and not reused.
The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11141615 will give you a 4-way flat trailer connection. The Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you with the other wiring and parts necessary for installing a Tekonsha Prodigy P3 Trailer Brake Controller # 90195. This brake controller features a quick release mount that will allow you to remove the brake controller easily and be used with both vehicles.
The 2013 Toyota Highlander will need the Draw-Tite Max-E-Loader Trailer Hitch Receiver # 75726. This will require trimming of panels for installation.
The Hopkins Plug-In Simple Vehicle Wiring Harness # HM11141845 will give you a 4-way flat trailer connection. Again the Universal Installation Kit for Trailer Brake Controller # ETBC7 will provide you with the other wiring and parts necessary for installing a Tekonsha Prodigy P3 Trailer Brake Controller # 90195. But if you wish to share the brake controller the Replacement Mounting Bracket # TK5906 and Replacement Brake Control Plug-In Harness # 20127 will allow you to quickly remove the brake controller from both vehicles. The Brake controller can be left in the trailer for whichever vehicle will need it for towing the Jayco.
I recommend the Equal-i-zer Weight Distribution System # EQ37060ET for both vehicles as this will help to keep the towing vehicle level when towing. It will also reduce the sway that occurs during windy conditions as well as from large trucks on the highway. Since both vehicles hitch heights are different(13" vs 18") you will need a separate Head # EQ90-02-0600, Shank # EQ90-02-4100, Ball # EQ91-00-6080, and the Hardware # EQ90-02-9100.
Products Referenced in This Question
Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Universal
- Draw-Tite
more information >
Draw-Tite Max-E-Loader Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Equal-i-zer
more information >
Replacement Head for Equal-i-zer Weight Distribution Systems - 600 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Head
- Square Bar
- Equal-i-zer
- Equal-i-zer
more information >
Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1400 lbs TW
- Fits 2 Inch Hitch
- Equal-i-zer
- Square - 3 Inch Drop
- Square - 7 Inch Rise
- Equal-i-zer
more information >
Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Bolts
- Equal-i-zer
- Equal-i-zer
more information >
2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 8000 lbs GTW
- Class IV
- Class V
- Equal-i-zer
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Hopkins
more information >
Replacement Mounting Bracket Kit for Tekonsha Prodigy P3 Trailer Brake Controller
- Accessories and Parts
- Trailer Brake Controller
- Mounting Hardware
- Brackets
- Tekonsha
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Replacement Bolts for Equal-i-zer Weight Distribution Head - 6,000 lbs to 14,000 lbs GTW
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 7" Rise, 3" Drop - 400 lbs TW
- Shop: Replacement Bolts for Equal-i-zer Weight Distribution Head - 4,000 lbs GTW
- Q&A: Replacement Hardware for Attaching Head of Equal-i-zer to Shank
- Q&A: How to Upgrade 12K Equal-i-zer to 14K Eqaul-i-zer
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 8" Rise, 4" Drop - 600 to 1,400 lbs TW
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 8" Rise, 4" Drop - 400 lbs TW
- Search Results: weight distribution hitch
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Base Plate for Tow Bar
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Wiring Harness For 2016 GMC Acadia Without Factory Tow Package
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Brake Shoes for Dexter Hydraulic 12-1/4 Inch x 4 Inch Brakes
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Wiring Needed for 2017 Chevy Traverse with Rear Air Conditioning Unit
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Cleaning Threads of 2014 Chevy Traverse to Allow Install of Trailer Hitch
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Brake Controller Installation: Starting from Scratch