Can V92 Tow Package be Added to 2012 Chevy Traverse LT

Question

Question:

Can I have a towing package installed on my Traverse and what is the capability of it to tow?

asked by: Forrest G

0

Expert Reply:

I can definitely help you out with equipment that allows you to tow with your 2012 Chevy Traverse but it is my understanding that the V92 Trailer Towing Package (as it is called on page 9-48 of your owner's manual) cannot be added to a vehicle without the tow package. You'd need to get clarification on this from a dealer.

According to my research the V92 Tow Package not only comes with a trailer hitch, wiring, and provisions for a brake controller, but there are also some other things like a heavy duty transmission cooler that contribute to the higher trailer weight rating. While we do have these products, we don't have the ability to say that your towing capacity will safely increase from 2,000 lbs to 5,200 lbs.

For a trailer hitch I recommend the Draw-Tite # 75528 because of higher weight ratings and the mounting tab for a wiring bracket. I recommend the T-One # 118450 wiring because of how reliable it is, and then if you want to upgrade to a brake controller I recommend the Curt Echo # C51180 with the Wiring Upgrade Kit # ETBC7L because this controller is operated by an Apple or Android smart device and is very easy to use and install.

To complete a towing setup you also need a ball mount kit. I recommend checking out Ball Mount Kit # 989900 because it includes two ball mounts, one with a 3/4” rise/2” drop and the other with a 2-3/4” rise/4” drop, a 1-7/8” hitch ball, a 2” hitch ball, and a pin and clip. You will want to refer to the attached ball mount article to ensure that this kit is correct for your towing application.

I have attached a few installation videos for you to check out. If you'd like to add an aftermarket transmission cooler to your Traverse I have attached a link to our selection for you to filter through as well as some helpful articles with info on coolers.

expert reply by: Jon G

0

click to enlarge

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

According to Derale, the correct fitting to install the D13504 cooler in your 2009 Traverse would be part #D13035, if the return transmission line is attached to the radiator using an E-clip. You would need two of them. If the connection does not…

view full answer...

Answer 3

The P3 brake controller, #90195, will go into a sort of sleep mode after it detects no movement for 15 minutes. While it is on it does not draw very much power. What you can do to make sure it goes to sleep is exit the truck after turning it off,…

view full answer...

Answer 4

I do not see any reason why you would not be able to tow a 1,255 pound boat and trailer with a 2008 Ford Taurus. You should check your vehicle owner manual and make sure that the gross trailer weight and the tongue weight of the boat, loaded and…

view full answer...

Answer 5

In order to determine if your 2012 Chevrolet Traverse has the factory tow package you will want to look for a sticker in your glove box. If there is a three digital "V92" code shown then you have the factory tow package. If you do then you…

view full answer...

Answer 6

I have a transmission cooler solution for your 2015 Chevy Traverse that will help with your extra piece of mind. Our most popular cooler for your vehicle is Derale's #D13503, this is a plate and fin style cooler. Depending on the amount of…

view full answer...

Answer 7

The normal operating temperature for the transmission fluid will vary by vehicle and ambient temperature. Therefore, I don't really have an exact figure for you to go by but the manufacturer may be able to give you more information on what the…

view full answer...

Answer 8

For your 2009 Chevy Traverse, lets start at the very beginning so I can walk you through parts needed. If you do not have a trailer hitch receiver, I recommend the Draw-Tite Class III #75528. This is a very strong hitch that will meet your towing…

view full answer...

Answer 9

Rusty weld nuts can make trailer hitch installs pretty difficult but there are solutions. First you want to clean them as well as possible so that hopefully that allows the bolts to thread. But worst case scenario you can use a thread tap to clean…

view full answer...

Answer 10

I was able to look up your previous order and find that your Dexter Axle came with the Inner bearing #L68149 and outer bearing #L44649. A great replacement kit for these bearing numbers is the #BK2-100, it will include the inner and outer bearing and…

view full answer...

Answer 11

Since you have a tandem axle you would need a total of 4 shocks (2 per axle) so that would mean you would need a quantity of 2 of the part #LC281281 that you referenced. As long as your trailer has a 3 inch axles this kit would work well for you.

view full answer...

Answer 12

According to the online information I found for your 2011 Buick Enclave CXL with front-wheel-drive, the vehicle is rated for a maximum trailer weight of 2000-lbs unless it is equipped with the trailer towing package, in which case its towing capacity…

view full answer...

Can V92 Tow Package be Added to 2012 Chevy Traverse LT

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching