Adjustable Ball Mount that Can Use Sway Control
Question:
Hello, I am looking for an adjustable hitch that has a quick adjustment to raise and lower but I want it to have sway bar control that can be taken on and off if possible. I have a brand new 2020 GMC Sierra 2500 and I got a 37 camper I need the sway bar control for BUT I also want to use the hitch to pull customer trailers around in my parking lot. Please let me know if you have questions. Thanks!
asked by: Eric S
Expert Reply:
The DrawTite Ball Mount Adjustable with Sway-Control Tab part # 7390 can be a great solution. You will want to replace the bolts with pins like part # PC3 for the quick adjustment to pull customers trailers around the lot and place the bolts in and torque them down for your longer camping trips. The reason for the bolts is to keep the sway ball in position so it can best fight the sway.
This will work out great with the Reese Friction Sway Control Kit part # 83660.
The ball mount uses a 1" shank so choose either the 2" Hitch Ball part # 63845 or the 2-5/16" Hitch Ball part # C40007. For use with multiple coupler sizes a good choice would also be the TowSmart Hitch Ball Set - 1-7/8", 2", and 2-5/16" Balls part # 3481256 this will allow you to quickly switch ball sizes with out the need to remove and re torque the ball each time.
Products Referenced in This Question
TowSmart Hitch Ball Set - 1-7/8", 2", and 2-5/16" Balls - 1" Shank - 8,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Interchangeable Ball Set
- 1-7/8 Inch Diameter Ball
- 2 Inch Diameter Ball
- 2-5/16 Inch Diameter Ball
- 1 Inch Diameter Shank
- 8000 lbs GTW
- TowSmart
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/4" Long Shank - Chrome - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/4 Inch Shank Length
- 1 Inch Diameter Shank
- 10000 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 5 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: 2002 Mercury Mountaineer Brake Controller Port Location and Install Harness
- Q&A: No 12V Power to Brake Controller on a 2001 Ford F-250
- Q&A: What is Maximum Rise of the B&W Tow & Stow 2-Ball Mount # BWTS10035B
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: Does Curt RockerBall C94CR Have More Cushion Than Curt RockerBall C40047
- Q&A: Troubleshooting Horse Trailer Interior Lights Not Functioning
- Q&A: Recommended MORryde Pin Box to Replace a Lippert Rhino Box
- Q&A: What is Minimum Air Pressure for Curt Flex Air Pin Box
- Article: Steel vs. Aluminum Ball Mounts
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Ball Mount Basics: Weight Capacity, Class, and Size