Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
(23 reviews)
Price: $158.01
Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
Item # AMAC1
Retail:$179.99
Our Price: $158.01
You Save: $21.98
In Stock
- All Info
- Reviews (23)
- Q & A (0)
- Photos
Convert-A-Ball Accessories and Parts - AMAC1
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Convert-A-Ball
- Round - 6 Inch Rise
- Trunnion - 7 Inch Rise
Cushioned weight-distributing shank helps to eliminate the push-and-pull feeling and "clank" often experienced when towing heavy trailers. Multiple attachment holes allow you to level your weight-distribution head. GTW is 10,000 lbs.
Features:
- Cushioned to protect tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Functions as a rise or drop to help you level your trailer
- Allows for up-and-down adjustment of weight-distribution head (sold separately)
- Constructed of powder coated steel with interior polyurethane cushion
- Works with Reese, Draw-Tite and Valley weight-distribution systems - round bar or trunnion bar
- Compatible with the following Convert-A-Ball accessories (sold separately):
- Pintle hook combo with balls (PH4)
- Ball mount adapter (BA-1)
- Clevis pin adapter (CA-1)
- Made in USA
Specs:
- Fits 2" x 2" trailer hitch receivers
- Attaches with 5/8" hitch pin (sold separately)
- Towing capacity: 10,000 lbs
- Tongue weight capacity: 2,000 lbs
- Vertical shank:
- 9-1/2" Long
- 2" Square
- 1/4" Thick walls
- 1-1/4" From center to center of holes
- Round-bar weight-distribution system
- Drop: 3-3/8"
- Rise: 6-5/8"
- Trunnion-bar weight-distribution system
- Drop: 2-5/8"
- Rise: 7-3/8"
- Measures 6-3/4" from center pin hole to hitch pin hole
- 2-Year limited warranty
Drop/Rise Ranges for AMAC1
This weight-distribution shank can be used to adjust the rise or drop of your weight-distribution head when leveling your trailer and tow vehicle. The actual drop or rise range will vary with the style of weight-distribution system used.
When used with round-bar weight-distribution system:
Maximum drop: 3-3/8"
Maximum rise: 6-5/8"
Distance from center of hitch pin hole to center of ball hole: 11-1/2"
When used with trunnion-bar weight-distribution system:
Maximum drop: 2-5/8"
Maximum rise: 7-3/8"
Distance from center of hitch pin hole to center of ball hole: 10-7/8"
Cutaway views of a Convert-A-Ball ball mount shank, showing the polyurethane cushioning.
This Convert-A-Ball weight-distributing shank meets or exceeds THMA V-5 ratings in all categories and meets SAE standard J-684.
AM-A-C-1 Convert-A-Ball Cushioned Weight-Distributing, Drop/Rise Shank - 10,000 lbs GTW
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs - AMAC1
Average Customer Rating: 4.9 out of 5 stars (23 Customer Reviews)
Cushioned weight-distributing shank helps to eliminate the push-and-pull feeling and "clank" often experienced when towing heavy trailers. Multiple attachment holes allow you to level your weight-distribution head. GTW is 10,000 lbs.by: Philip 10/08/2022
The Convert-a-ball hitch allows me to level my boat trailer easier, and it quietens the drive to the boat ramp by reducing hitch noise caused by uneven pavement.
by: Louis10/25/2021
This product is great but I have replaced it with a more appropriate hitch. I needed a three inch wide mounting plate for the McHitch fully articulating system on my Black Series HQ15. The unit I purchased came all the way from Australia.
by: Jon G.05/15/2016
Seems to work well. Only used for a short trip and it softens the impact when stopping & starting. I plan to hover near the 10000lb limit with a 30ft toy hauler and hope this hitch holds up. Will report back after more use.
by: Modern Yankee09/08/2015
The cushioning system definitely works well (I'm towing an 8000# trailer with a 2015 Yukon XL Denali). The hollow vertical part has me wondering why so many other adjustable height shanks are solid steel. It's rated for 10,000# so it should be fine.
by: Bill Shiers04/09/2017
When I traded vehicles, my new trailer receiver was 4 inches lower. My weight distribution shank did not have holes high enough to raise the ball. The convert-A-Ball was the perfect solution. etrailer delivered promptly. The product was just as described and fit perfectly. Thank you etrailer.
by: Martin Z.09/13/2016
First pull went great, didn't have the random "clunk" upon decelerating or accelerating. Little loose in the reciever, but i havn't found a reciever that isn't. Once the WD is on, no issues.
etrailer.com is fantastic
by: Mike A08/24/2017
Heavy duty and it helps with movement in the hitch. Smoother while pulling my trailers with my F150.
The price and service from etrailer was top notch.
by: Ken N.03/30/2015
Staff was extremely friendly and knowledgeable.
The product came right on time and we were able to take the family camping with no issues as I was able to adjust the weight distribution system to the needed level.
I highly advise to buy this product for a level worry free ride :)
by: Ron W.03/06/2013
I received my new weight distribution shank on time. It is exactly what I wanted for my 2013 Ford F-150 that is taller than my previous 2005 Silverado. I will be putting it to use this weekend, I am looking forward to its cushining characteristics.
by: Mike S06/17/2011
First time ordering from this site, very pleased with quick shipping time and product prices are very good. Just put on truck this morning and pulled our camper from it's storage site, so far so good, works well and has plenty of adjustment notches to level camper with truck for smooth pulling.
by: Jodie02/10/2019
Hitch looks heavy duty and was a good price and fast shipping.
by: Michael 11/11/2022
Good price on the product. Quick shippi ng.
by: Todd02/06/2022
Well built. I have another one but smaller and the cushioned shank is a excellent idea ,I wouldn't want anything else.
by: larry08/15/2013
The product is what I needed. I felt very comfortable and assured with the associates there being knowledgable about the product and how they made sure I got what I needed.
Thank you.
by: Dong Park06/24/2014
The product was good enough.
Your service has already been great.
Thanks
by: Bill12/27/2012
Excellent product. Smooth towing and very beefy. My Diesel 2500 needed the lower ball and this works perfectly.
by: Bradley M02/02/2012
I love Etrailer! I live in KC so UPS ground is like overnight! So far the new hitch looks good and I will find out Friday if it works as well as it looks! Thanks!
by: Sean H.03/08/2012
The product is exactly as described. I haven't installed it yet, but it seems well made and should do the job excellently.
by: joe k 03/14/2012
better than expected , glad i found this one , cushioned VERY NICE (>>???<<)
by: Charles08/28/2019
Easy and fast service.
by: Thomas 03/09/2023
by: Aaron 03/09/2021
by: Mario 09/30/2022
23
23
See what our Experts say about this Convert-A-Ball Accessories and Parts
- What Type of Shank Fits Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution ShankThe Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank # BA-1 only fits on weight distribution shanks and would not fit the shank of the Curt # C45900. You'd want to use it with a shank like the part # AMAC1 instead.
view full answer... - Can I Use # 66010 Trunnion Bars in My # RP66131 Weight Distribution System to Increase Weight Cap.I spoke with my contact at Reese and he informed me that yes, you can swap the Reese Replacement Trunnion Spring Bar, 1,700 lbs, part # 66010 into your Reese Weight Distribution w/out Shank - Trunnion Bar - 15,000 lbs GTW, 1,500 lbs TW, part # RP66131, to increase the capacity of your weight distribution system to 1,700 lbs. The head of your weight distribution system is capable of the 1,700 lbs, however you will need to make sure the the shank you are using is capable of 1,700 lbs tongue...
view full answer... - Drop Dimensions of 11 Inch Weight Distribution Shank # RP3215The minimum drop is 4-1/2 inches, the maximum is 6-7/8 inches and it adjusts by 1-1/4 inch increments. Since you need a drop of 3-1/2 inches, # RP3215 is not the best option for your application. Part # AMAC1 has a maximum drop of 3-3/8 inches which is close enough to 3-1/2 inches. It has a maximum tongue weight capacity of 2,000 pounds and maximum trailer weight of 10,000 pounds. If you have a heavier trailer weight, you can use part # RP54977. It has a minimum drop of 3-1/4 inches which...
view full answer... - Hole Spacing For An Adjustable Ball Mount 2 Inches on CenterI see the confusion with the hole spacing and think I can clear it up. The holes are 3/4 inch and they are 2-1/2 inches apart on center. They are not 1-1/4 inches apart however, that is the adjustment increment based on the Convert-A-Ball Cushioned Weight Distribution Shank for 2 inch Hitches,# AMAC1, this part is paired with. The actual metal spanning between the holes is 1-3/4 inches. The only similarly styled adjustable ball mount I could find that has a 2 inch on center adjustment...
view full answer... - Will the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank Fit a Curt ShankYes, the Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank # BA-1 will fit with your Curt shank. The Ball Mount Adapter for Convert-A-Ball Cushioned Weight Distribution Shank # BA-1 was designed to be used with the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1. Which has the same 2" wide shank with 3/4" holes spaced 1-1/4" apart center-on-center. The ball hole diameter for the # BA-1 is 1".
view full answer... - Does the Pintle Hook Adapter for Convert-A-Ball Weight Distribution Shank Work With a B&W HitchTo use the Pintle Hook Adapter for Convert-A-Ball # PA-1 you would need the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1. The Convert-A-Ball Cushioned Weight Distribution Shank fits 2" x 2" trailer hitch receivers. The Pintle Hook Adapter will only work with the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1.
view full answer... - Dimensions of Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1I ran out to the warehouse, and pulled one of the # AMAC1 shanks. I found that the distance from the end of the shank that would insert into the hitch receiver to the center of the hitch pin hole is exactly 2-11/16 inches, as you can see in the accompanying photo.
view full answer...
- Dimensions of the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1I believe the measurement you are looking for is 7-1/4 inches. I attached a picture that shows this measurement as well as another picture that has some other measurements you may find useful. If you need any other measurements just email me back.
view full answer...
- Adjustable Ball Mount Set that Has 1-7/8 inch and 2 inch BallWe have a similar way to accomplish what you are looking for from the # C45901 but we don't have replacement platforms for it. So instead you'd want the shank part # AMAC1, two platforms # BA-1 and then the ball sizes you want # 63845 and # C40002.
view full answer... - Will the Convert-A-Ball Cushioned Weight Distribution Shank Work with Equal-i-zer WD SystemYes, the Equal-I-zer head mounts to shanks that use 3/4 inch bolts that are 1-1/4 inches apart on center, which means that the # AMAC1 would be compatible with it.
view full answer... - Will Ball Mount Adapter Work With Weight Distribution ShankI pulled one of the Ball Mount Adapters, part # BA-1 from our warehouse and took a measurement for you. As the attached photo shows, the center-to-center measurement is 2-1/2 inches. With 3 inch spacing on your shank this will unfortunately not work for you. We do offer a shank that might work for you and will work with the ball mount adapter. I recommend the Convert-A-Ball Cushioned Weight Distribution Shank, part # AMAC-1. This Shank fits 2 inch receiver openings and the holes are spaced...
view full answer...
- Compatibility of Lock N Roll Articulating Hitch With Weight Distribution SystemsUnfortunately, there isn't a way to use the # 336VS501 Lock N Roll articulating hitch while using weight distribution. The good news is that we do offer a cushioned weight distribution shank, part # AMAC1. The shank has a 10K towing/2000 tongue weight capacity, and if used with a round bar system, it offers a 3-3/8 inch drop or 6-5/8 inch rise. When used with a trunnion bar system, it offers a 2-5/8 inch drop or a 7-3/8 inch rise. I've linked to a product demonstration video featuring...
view full answer... - Recommended Weight Distribution Shank With A Rise Of 6 InchesSince your truck hitch height is 17" and your trailer tongue height is 23", you will need a shank with a minimum of 6" rise. I recommend going with the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1. This has a max rise of 6-5/8" when used with a round bar weight-distribution system and a max rise of 7-3/8" when used with a trunnion bar weight-distribution system. This will fit your 2017 GMC Sierra 1500 receiver's 2" opening and has a max towing capacity of 10,000lbs. This shank...
view full answer... - How To Help With The Slop Of My Equal-i-zer Weight Distribution Hitch When it comes to helping with hitch slop on your Equal-i-zer weight distribution hitch I recommend switching your shank with The Convert-A-Ball Cushioned Weight Distribution Shank for 2 inch Hitches - 10,000 pounds # AMAC1. Using this weight-distributing shank will help eliminate the push-and-pull feel and knocking noise that is often experienced when towing heavy trailers. The shank has multiple attachment holes that allow you to level your weight-distribution head. The shank is constructed...
view full answer... - How To Use Weight Distribution System with 2-1/2" Shank on a Truck with 2" Trailer HitchThe best option to use a weight distribution system with 2-1/2" shank on a truck with 2" trailer hitch is a new shank, the Convert-A-Ball Cushioned Weight Distribution Shank part # AMAC1 is a great option with built-in cushioning. There are no 2-1/2" trailer hitch options for 2017 GMC Sierra 1500.
view full answer... - Recommended Weight Distribution Hitch That Measures 11.5 Center of Ball Hole To Center of Hitch PinThe best option we have is the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank # FA94-00-1033 which measures 5" from the center of the ball hole to the center of the shank mounting holes, and then using the Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches # AMAC1 which measures 6-3/4" from the center of the hitch pin hole to the center of the shank holes. This option will give you right at 11-3/4" and which is the closest...
view full answer...
- Recommended Weight Distribution Hitch for a 4,000 Pound Trailer and a 2003 Honda PilotTo be on the safe side, we will assume the maximums; trailer weight of 4,000 pounds and tongue weight of 425 pounds. When selecting a weight distribution system, the most important thing is properly matching tongue weights. That being said, you never want to exceed the gross trailer weight capacity either. We have a few weight distribution systems with sway control, that have a 400-600 pound tongue weight range and they all have more than enough gross trailer weight capacity. Being that...
view full answer... - Can Convert-A-Ball Cushioned Weight Distribution Shank be Used Without a Weight Distribution SystemYes, you can use the Convert-A-Ball Cushioned Weight Distribution Shank # AMAC1 without a weight distribution system and it will keep its 10,000 pound weight rating. The Ball Mount Adapter # BA-1 is designed to work with it just for that purpose and is also rated for 10,000 pounds GTW.
view full answer... - Can Convert-A-Ball Ball Mount Adapter Be Used with Any Weight Distribution ShankThe Ball Mount Adapter # BA-1 can be used with any weight distribution shanks with 3/4 inch shank diameter and holes 1-1/4 inch apart. Which is the standard. The only shank type you will not be able to use it with are shanks with a hollow channel, such as part # RP63971. The holes will not line up with the holes on the adapter. But if you stick with a solid design like the # AMAC1 you'll be just fine.
view full answer... - Will the Convert-A-Ball Cushioned Weight Distribution Shank Fit a Curt Weight Distribution SystemBoth the Convert-A-Ball shank, # AMAC1, and Curt shanks have hole spacing of 1-1/4 inches on center so you can use the AMAC1 on a Curt weight distribution system. I have included a link to a video review of the AMAC1 for you.
view full answer... - Weight Distribution System And Towing Mirror Recommendations For 2009 Chevrolet SuburbanThank you for the great information about your 2009 Chevrolet Suburban and your new trailer. It really helps when we try to find components that work best for you. You will want to choose a system where the tongue weight falls near the middle of the weight distribution system range. The tongue weight will be the tongue weight of the fully-loaded ready-to-tow trailer added to the weight of any cargo placed behind the rear axle of your towing vehicle. A system like the Pro Series Weight...
view full answer... - Weight Distribution Shank With Taller Shank than # AMAC1The overall height of the part # C17123 is 13-1/4 inches which is a bit taller than the # AMAC1 that you referenced. You didn't say how much taller you needed but this is a few inches.
view full answer... - Weight Capacity of the Convert-A-Ball Adapter Part Number BA-1I contacted our representative at Convert-A-Ball and the weight capacity of the ball mount adapter # BA-1 is 10,000 pounds and tongue weight capacity is 2,000 pounds. It bolts right onto your weigh distribution shank such as the Convert-A-Ball # AMAC1. The adapter # BA-1 can fit other weight distribution shanks with 3/4 inch shank diameter holes and holes 1-1/4 inches apart on center. I added a short video review for you too.
view full answer...
- Can Convert a Ball Shank AMAC1 and Platform BA-1 Achieve 2 inches of RiseThe ball mount adapter part # BA-1 that you referenced will fit the Convert a Ball shank part # AMAC1. With the shank in the rise position you could easily achieve 2 inches of rise.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Patrick B
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Test Fit:
Rick A
Test Fit:
Matthew K
Test Fit:
Cole B
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.