Ball Mount for 2-1/2-Inch Hitch That Gives 8-Inches of Drop
Question:
Good afternoon, I have a 2016 Ram 2500 4×4 Mega cab. Does Convert-A-Ball make an 8 inch for a 2 1/2 × 2 1/2 inch receiver? Thank you
asked by: Kurt D
Helpful Expert Reply:
The Convert-A-Ball 2-1/2-Inch Cushioned Ball Mount # AMSCV-6 provides height drop of 6-inches but since they do not offer one like it with 8-inches of drop you can instead check out the items on the linked page which provide 8-inches of drop. These include both fixed ball mounts like 12K Draw-Tite # 45291 and 20K Curt # C45460 and adjustable ball mounts like Bullet Proof # ED258.
Products Referenced in This Question
Draw-Tite Ball Mount for 2-1/2" Hitches - 7-3/4" Drop - 10-1/2" Long - 13,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 0 Inch
- Fits 2-1/2 Inch Hitch
- 13000 lbs GTW
- Class V
- Draw-Tite
more information >
Curt Ball Mount for 2-1/2" Hitches - 6-1/2" Rise, 8" Drop - 20K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 6 Inch
- Fits 2-1/2 Inch Hitch
- 20000 lbs GTW
- CURT
more information >
BulletProof Hitches 2-Ball Mount for 2-1/2" Hitch - 9-1/4" Drop, 9" Rise - 36,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 9 Inch
- Rise - 9 Inch
- Fits 2-1/2 Inch Hitch
- 12000 lbs GTW
- 36000 lbs GTW
- BulletProof Hitches
more information >
Product Page this Question was Asked From
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 4-3/4" Rise, 6" Drop - 18,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2-1/2 Inch Hitch
- 18000 lbs GTW
- Class V
- Shock Absorbing
- Convert-A-Ball
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Weight Capacity Of The Ark Drop Down Corner RV Stabilizer Jacks # ARK77FR
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Plugged Trailer In, there Was a Spark, Now Trailer Lights Will Not Work
- Q&A: 7-Way Trailer Connector Sparked When It Touched Bare Bolt Of Trailer
- Q&A: Recommended Stabilizer Jacks for Off Road Use
- Q&A: Is Sag Caused by Trailer Tongue Weight Considered When Choosing Ball Mount w/the Right Rise or Drop
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Resetting the Atwood RV Carbon Monoxide and Propane Gas Detector AT36681
- Q&A: Does The Edge Pulsar V3 L5P Inline Tuner Void The Factory Warranty on a 2020-2022 L5P Duramax?
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Ball Mount Basics: Weight Capacity, Class, and Size