10to 12 Extended Ball Mount For Class-5 Hitch With 2 Receiver?
Question:
Im looking for an 8-12 extension I can use on my service truck to pull an RV. Truck hitch is a class 5 heavy duty 18,000lbs rated, frame mounted 2 receiver. RV weight loaded 5500lbs. My service bed is wider than a normal bed and hits the front of the camper while turning.
asked by: Dennis C
Expert Reply:
In your question you state that you have a Class-5 hitch, and they come with a 2-1/2” receiver opening. You also state that you have a 2” receiver. I will offer a ball mount solution for either size receiver.
For a 2” receiver you can use the 13-1/4” long Brophy # BM20 with 2” drop, or the 14-1/4” long Curt # D-28 with 6” drop.
For a 2-1/2” receiver you can use the 12-1/4” long Convert-A-Ball # AMSCV-6 with 6” drop, or the 10-1/2” long Draw-Tite # 45291 with a 7-3/4” drop, or the 13-1/4” long Brophy # BZ20 with 2” drop.
I am recommending long hitch ball mounts. The use of “hitch extenders” dramatically reduces hitch weight capacities.
If you need a new hitch ball for this project, just let me know what diameter ball you need, and what diameter shank (the threaded part) you need that ball to have and I can add that to your recommendation.
To keep your setup working smooth and quietly grab a jar of Reese # 58117 ball lube. If you need an extra hitch pin and clip on hand consider the Curt # C21500 hitch pin with clip.
Products Referenced in This Question
Draw-Tite Ball Mount for 2-1/2" Hitches - 7-3/4" Drop - 10-1/2" Long - 13,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 8 Inch
- Rise - 0 Inch
- Fits 2-1/2 Inch Hitch
- 13000 lbs GTW
- Class V
- Draw-Tite
more information >
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 4-3/4" Rise, 6" Drop - 18,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2-1/2 Inch Hitch
- 18000 lbs GTW
- Class V
- Shock Absorbing
- Convert-A-Ball
more information >
Brophy Ball Mount for 2-1/2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10k lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2-1/2 Inch Hitch
- 10000 lbs GTW
- Brophy
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Brophy
more information >
Continue Researching
- Q&A: Difference Between Brophy # BM20 and # BH20 Ball Mounts
- Shop: Brophy Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 13-1/4" Long - 10K
- Shop: Brophy Ball Mount for 2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10,000 lbs
- Shop: 2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Q&A: Is it Safe to Tow Using Reducer Sleeve on 2021 Ford F-250
- Shop: Brophy Ball Mount for 2-1/2" Hitch - 3/4" Rise, 2" Drop - 13-1/4" Long - 10k lbs
- Q&A: 2 1/2” Ball Mount Extension for Tailgate Clearance
- Q&A: Hitch Extension For a 2021 Ram 2500 For 2-1/2" Receiver Pulling a 16' V-Nose Trailer
- Q&A: Does Brophy Ball Mount BX20 Fit Over Combo Bar # D30
- Shop: Brophy Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Shop: Trailer Hitch Reducer and Extender - 2-1/2" to 2" Trailer Hitch - 7" Long
- Shop: Draw-Tite Ball Mount for 2-1/2" Hitches - 7-3/4" Drop - 10-1/2" Long - 13,000 lbs
- Q&A: Can Ultimate Trailer Jack 322-RDJ-2K Be Completely Removed From Mounting Bracket?
- Q&A: Will Ultimate Trailer Jack Sit Flush With Collar For Tailgate Clearance
- Search Results: outdoor rug
- Search Results: rv outdoor rugs
- Search Results: level
- Search Results: ball mount extension
- Search Results: rug
- Search Results: coupling
- Search Results: easy grease
- Video: Ultimate Trailer Jack A-Frame Topwind Jack Review