Erickson E-Chock Wheel Chock for E Track - Powder Coated Steel - Qty 1
(455 reviews)
Price: $23.69
In Stock
Erickson E-Chock Wheel Chock for E Track - Powder Coated Steel - Qty 1
Item # EM09162
Retail:$44.76
Our Price: $23.69
You Save: 47%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (455)
- Q & A (0)
- Photos
Erickson E-Track - EM09162
- E-Track Wheel Chocks
- Erickson
Rust-resistant steel wheel chock helps stabilize 1 wheel of an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E track fitting allows you to easily move the chock to different anchor slots on horizontal E track.
Features:
- E track wheel chock helps stabilize 1 wheel of a vehicle that's tied down in your truck bed or trailer
- Works great for race cars, hot rods, ATVs, UTVs, and more
- Pairs perfectly with E track tie-down straps (sold separately)
- Movable chock can be installed anywhere along horizontal E track (sold separately)
- Pull spring-loaded lever to quickly secure chock to E track anchor slot
- Remove and reinstall chock as needed
- Durable steel construction
- Yellow powder coat finish is corrosion resistant
Specs:
- Quantity: 1 wheel chock
- Overall dimensions: 8-1/2" long x 6-3/8" wide x 4-1/2" tall
- 90-Day warranty
The E-Chock helps stabilize race cars, hot rods, ATVs, UTVs, and other wheeled equipment that's tied down in your truck bed or trailer. And unlike other wheel chocks that have to be permanently installed, this wheel chock can be quickly and easily moved to different anchor slots on horizontal E Track (sold separately). This means that you can easily adjust your setup depending on what you're hauling. The spring-loaded lever on the E Track fitting lets you snap the wheel chock into place and then remove it when you need to install it into a different anchor slot. This chock is perfect for use with E Track tie-down straps (sold separately).
09162 Erickson Manufacturing Moveable E-Chock E-Track Wheel Chock - Steel - Qty 1
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
- Defective
Customer Reviews
Erickson E-Chock Wheel Chock for E Track - Powder Coated Steel - Qty 1 - EM09162
Average Customer Rating: 4.7 out of 5 stars (455 Customer Reviews)
Rust-resistant steel wheel chock helps stabilize 1 wheel of an ATV, UTV, car, or truck that's tied down in your truck bed or trailer. The E track fitting allows you to easily move the chock to different anchor slots on horizontal E track.by: Robert09/17/2021
Made in China ( what isn’t anymore) ordered these chalks because the versatility of towing different vehicles and wheelbases. the mounting slides are so tight and different from chalk to chalk that it takes a dead blow hammer to insert them into the slots that once they’re installed it would be very difficult to remove them. Not the simple well thought out idea it should of been.
by: Bruce 07/28/2022
The wheel chocks connected securely to my e-track sections. I look forward to using the system to secure my UTV.
by: Kristian11/09/2020
Etrailer had the lowest price and shipping on these things. They work awesome. I use these on my e-track I laid down for my UTV. They click right in and sold. Drive right up to them and I’m perfectly in place every time and safely held in place for strapping down and hauling down the road. Worth buying of your moving a vehicle and want to keep things safe.
by: Eric04/27/2022
I purchased 10 of these for my 4 wheelers and they worked great. Great product and highly recommended for easy use in the E-Track system.
Eric
4/28/2023
They have been working out great. I purchased additional E-Chocks since then and use them quite often. Great product to hold your 4 wheeler’s or side by sides as well.
by: Brad 03/19/2024
Does what it is supposed to do
by: Stewart03/24/2023
Great design with Extra Heavy Duty steel, for securely locking into E-Tracks. A great asset to lock down any wheeled vehicle or equipment! I absolutely love this heavy gauge steel trailer chock.
by: Doug08/30/2023
They do not sit in the e-track properly.
by: Max02/03/2022
They don’t fit very well in the tracks. Slightly too large. The big wheel chock sucks. Does not hold bike upright. Had to get another manufacturer, [online], it hold the bike very well. More money but it works very well. Had to get a narrow chock for skinnier tires. [online} does it all…
Jenny N.
2/7/2022
This chock works with horizontal E-track and clicks into place. Please see mark 0.52 in the video link below to see it. It measures to be 85 inches long x 6.375 inches wide x 45 inches tall. It works with most race cars, hot rods, ATVs, UTVs.
by: Robert12/13/2021
Stops my Polaris UTV on our flatbed and keeps it in place.
Robert
12/14/2022
After s year I am still very happy with my entire e-track setup. Quick and easy to secure my Polaris General.
by: Robert 10/13/2021
Great product.. I bought a 14' Aluma tilt trailer, and had some aluminum E-track installed. I can attach these Erickson E-Chock Wheel Chocks anywhere I need them. I load my Polaris and attach my Tire/wheel nets, and I'm ready to roll. These removable Erickson E-Chock Wheel Chocks also allow me to use the same trailer for many other things, like general hauling, motorcycles, kayaks, etc..
by: Ron H.02/17/2020
These E-Track chocks have proved invaluable in being able to re-load my car in the trailer back to the same location every time. Trailer balance is important and knowing the clearances to the front and back of the inside of an enclosed trailer is key. Once establishing the best location for these criteria, easy repeatability takes a big load off knowing you're properly positioning your car.
by: Richard 08/25/2021
The Erickson E-Chock is a great addition to E-Track line of products. The E-Chock adds that additional stability for securing your atv/utv toys. Keep in mind still requiring tie downs. More than happy with product and highly recommended.
by: RANDY F08/09/2017
BOUGHT THE E-CHOCK TO LET ME KNOW WHEN TO STOP IN THE TRAILER. IT IS VERY WELL MADE AND HOOKS INTO THE E-TRACK FAIRLY EASY CONSIDERING THAT YOU HAVE TO HOOK THE FRONT AND BACK INTO THE E-TRACK. ONLY DOWNSIDE WAS THE LONG WAIT BECAUSE THE SUPPLIER DID NOT SUPPLY THEM TO ETRAILER...WAIT WAS ABOUT SIX WEEKS.
by: James l05/02/2018
Looks like this would be a great item, but the E-Tracks on my trailer are recessed by 1/2" and I can not attach the stop to the current e-track. I may try putting some track higher so this could attach
by: Billy 08/01/2023
Service was excellent
by: Wayne C.08/07/2017
Just received the E-Track chocks for my cargo trailer. They were back ordered but everything else I ordered arrived quickly and in good shape. The chocks took a little while but the communication was very good from Cathy T. at etrailer, the customer service is outstanding.
by: Terry08/26/2019
Product works well, and as expected. I use these chocks for consistently locating the car in the trailer (for weight distribution).
by: Rodney04/12/2019
Works exactly as described. Simplifies loading the car onto the trailer. Don't have to have someone spot the car to put it into the proper position.
by: Donald04/29/2022
Using these wheel nets and e-track is the best way I’ve found to secure a UTV to a trailer. They are fast and easy to put on and take off, and the machine doesn’t move an inch on the trailer.
by: Jay08/08/2017
Product works great, except that it's pretty tight on aluminum E-trac, and will not work on right side. Aluminum is thicker on one side, for extra strength. Will have to trim to fit, unless you have an alternative idea?
by: Frank 09/07/2022
Great addition to my classic car traile r.
by: Steve 06/09/2023
Easy to use. Works good.
by: William04/01/2023
When they were welded in China they warped and neither one will fit in the Etrack I purchased with them.
by: Joseph 01/23/2022
These work very well when loading machine on trailer. They stop me so I don’t hit toolbox mounted on front of trailer
25
454
Show More Reviews
See what our Experts say about this Erickson E-Track
- Weight RatingThe manufacturer does not provide a weight rating for the Erickson E-Chock Wheel Chock for E-Track, # EM09162. These are designed with overall dimensions of 8-1/2" long x 6-3/8" wide x 4-1/2" tall and to be used with a tie-down strap. The purpose is to provide a wedge/stop point of tire while the strap or wheel net holds item in place.
view full answer... - Availability of E-Chock Wheel Chocks and E-Track Strap for Honda SXS With 32 Inch TiresWhile we do have separate E-Chocks available like the # EM09162, they require E-Track rails like the # e65VR. Unfortunately, the E-chocks with the E-track slots are only available with the # EM98CV tie-down kit. There is also no way to substitute the straps in the kit. We do have longer straps available like the Erickson E-Track Strap with Ratchet # EM59136. This strap is 12' long x 2" wide and has a safe working load limit of 1,165 lbs.
view full answer... - How Many E-Track Slots Does the E-Chock part # EM09162 Take UpE-track slots are 2 inches apart on center and the E-Chock part # EM09162 measures 8-1/2 inches in length so that means it takes up 4-1/4 slots.
view full answer...
- Compatibility of Erickson EM09162 e-Track Mounted Wheel Chock with Vertical e-Track.The Erickson # EM09162 E-Chock Wheel Chock will work with vertical e-track, but the chock will sit perpindicular to the e-track, rather than inline as it would sit with standard e-track. The slots in the standard and the vertical e-track are the same exact dimensions. I've linked a product description video featuring the e-track mounted wheel chock.
view full answer... - Are All of the E-track and X-Track Accessories InterchangeableThat's a fine question. Unlike many things in this world the companies like Kinedyne, Erickson and Cargo Smart all made the tracks the same size! So luckily for us we can use any of the e-track or x-track accessories like the Erickson E-Chock Wheel Chock for E-Track part # EM09162 interchangeably. As a side note I really like X-Track or E-Track and find it to be extremely handy. Enjoy.
view full answer... - How Do I Figure Out What Hub And Bearings I Need For My Enclosed Trailer?Hey Nicholas, I can definitely point you in the right direction. Unfortunately, there is no database that we can reference that would tell us hub or bearing specs based on the VIN number. Only the manufacturer of the trailer could provide that kind of info. In order to recommend hubs and bearings we would need the following information: - Axle weight capacity - Hub bolt pattern - Inner and outer bearing numbers/sizes. There should be a tag on the axle that shows the weight capacity....
view full answer... - Mounting E-Tracks in Enclosed TrailerThere needs to be some type of strong structural component on your trailer where you want to mount the Erickson Horizontal E-Track # EM59150. There is nothing that I can recommend which will ensure they will be strong enough unless your trailer has the proper place to mount the tracks. You may want to consider putting the E-track on the floor and then using Erickson E-Chock Wheel Chock for E-Track # EM09162 and ratcheting straps such as # EM59136.
view full answer... - Available Erickson E-Track Wheel ChocksErickson offers only one size of E-Track wheel chock which measures 8-1/2 long x 6-3/8 wide x 4-1/2 tall. This is offered as a single chock under part # EM09162 and as a pair under part # EM09162-2. Erickson does offer a wheel chock and tie-down kit for ATVs, part # EM09160, which uses bolt-on chocks that attach directly to a trailer's deck (not to E-Tracks). With your finished floor setup this might be a better option.
view full answer... - Can Wheel Nets or Wheel Straps be Used With Wheel Chocks on E-TrackYou can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track # EM09162 (this is a quantity of one strap but can be ordered in a pair at part # EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs # 77314 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523. For a kit I recommend the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel...
view full answer... - Single Erickson E-Chock Versus KitThe cost of the Erickson E-Chock Wheel Chocks for E-Track - Powder Coated Steel - Qty 2 # EM09162-2 and the single # EM09162 vary from the manufacturer. We adjust our prices based on the manufacturer to attempt to keep the cost the lowest for all our customers. They are the same product, so whichever is a lower price at any given time would be my recommendation.
view full answer... - Can Erickson Wheel Chock EM09162 be Used with Dirt BikeFor a mini bike like a 2023 KX 112 the e-track wheel chock kit par # EM09162 would fit and work great.
view full answer... - How Far Apart Are Mounting Holes For Erickson Horizontal E-Track EM19147The mounting holes are 2 inches apart, and to ensure its full capacity we do recommend screws in every mounting hole for the Erickson Horizontal E-Track # EM19147. While we do not have the mounting hardware, the mounting holes are 1/4" diameter, so that's the size you'd want, with the correct length depending on how thick your wooden planks are; just be sure to get wood screws which I'm sure you knew but I just wanted to be thorough for you. This will work great with the Erickson E-Chock...
view full answer... - How Many Wheel Chocks part # EM09162 Would be Required to Secure Car to TrailerYou would only need to use one of the E-Track Wheel Chocks part # EM09162 with the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet # EM58523 that you referenced. Only one chock would prevent the vehicle from moving. I would use at least two of the straps though just to be safe. Having them on all 4 wheels would be your best option.
view full answer...
Do you have a question about this E-Track?
Info for this part was:
Edited by:
Leah B
Expert Research:
Mike L
Expert Research:
Jameson C
Video Edited:
Zack K
Video Edited:
Kathleen M
Installed by:
Cole B
Installed by:
Randy B
Written by:
Mary K
Updated by:
Wilson B
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bruce
7/29/2023
The wheel chocks work perfectly for my side by side. Just used them again this week.