Lippert Electric Tread Lite Step for RVs - Double - 8" Drop/Rise - 23-3/4" Wide - Aluminum
(34 reviews)
Price: $874.12
In Stock
Lippert Electric Tread Lite Step for RVs - Double - 8" Drop/Rise - 23-3/4" Wide - Aluminum
Item # LC353543
Retail:$1,003.95
Our Price: $874.12
You Save: $129.83
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (34)
- Q & A (0)
- Photos
Lippert RV and Camper Steps - LC353543
- Motorhome
- Electric Step
- 2 Steps
- 24 Inch Wide Step
- Lippert
- 25-5/8 Inch Wide
- Aluminum
- 8 Inch Drop/Rise
- No Ground Contact
These 8" deep motorized steps automatically extend and retract when you open and close your RV door. A built-in LED light shines when the steps extend to help you see in the dark. Non-skid stepping surface. Rustproof aluminum construction.
Features:
- Motorized RV steps make it effortless to get into and out of your motor home
- Automatic operation - steps extend when door is opened and retract when door is closed
- Sense when door is open or closed with a 2-piece switch that installs on the door and the door frame
- Obstruction detection helps to prevent damage to the steps and to your RV
- Steps retract if an object is detected in front of them
- Safe for stepping in the dark
- Built-in LED safety light automatically turns on when the steps extend
- Non-skid textured surface provides secure footing
- Rustproof aluminum construction with black powder coat finish
- Wiring harness and door switch are included
- Harness connects to your RV's power switch
- Steps draw power directly from RV battery, bypassing the electrical system
- Easy bolt-on installation
- Mounts to RV frame with hardware kit (LC118155-72 - sold separately)
- May require outriggers (LC301704 - sold separately) for installation
- Made in the USA
Specs:
- Entry height: 19-1/2" - 22-1/2"
- Step dimensions: 23-3/4" wide x 8" deep
- Mounting bracket dimensions: 25-5/8" wide x 7-3/4" tall x 18" deep
- Drop/Rise: 8"
- Weight capacity: 300 lbs
- 1-Year limited warranty
Automatic Operation
These motorized RV steps provide an effortless, convenient way to enter and exit your RV. The steps wire to your RV's door and feature an automatic extension, unfolding when the door opens and retracting when it closes. This differentiates the steps from the alternate manual pull-out steps.
The included switch kit consists of 2 sensor pieces, which mount on the door and doorframe. When the sensor pieces come into contact with each other, the steps are pushed in or pulled out.
Safety Features
The Tread Lite steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicle's ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.
Will Tread Lite Electric Steps Work for You?
Electric steps are typically installed on RVs and some travel trailers. The Tread Lite electric steps install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Tread Lite electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 25-5/8" wide and 18" deep.
If it turns out you have more space beneath your doorway, there are larger step assemblies available with 32" wide brackets. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 5" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays entry height measurements in the first column. If you determined you need a 25-5/8" mounting bracket, the step part numbers with that width are in the second column. If you determined you need a 32" mounting bracket width, the step part numbers with that width are in the third column. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Entry Height | 25-5/8" Mounting Bracket Width | 32" Mounting Bracket Width |
|---|---|---|
| 11-1/2" - 14-1/2" | LC353542 | LC353620 |
| 19-1/2" - 22-1/2" | LC353543 | LC353621 |
How Do You Install the Steps?
To install the steps:
- Hook up the steps to power to verify that all components are in working order
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with carriage bots and flange lock nuts
-Make sure bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware tight
- Connect the appropriate writing to your vehicle's source
353543 Lippert Components (LCI) Treadlight Motorized Sliding Step - Double
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Defective
Customer Reviews
Lippert Electric Tread Lite Step for RVs - Double - 8" Drop/Rise - 23-3/4" Wide - Aluminum - LC353543
Average Customer Rating: 4.8 out of 5 stars (34 Customer Reviews)
These 8" deep motorized steps automatically extend and retract when you open and close your RV door. A built-in LED light shines when the steps extend to help you see in the dark. Non-skid stepping surface. Rustproof aluminum construction.by: Jane04/24/2024
Steps are great when they work. Every once in awhile they get stuck
by: Helen06/10/2022
Perfect fit for my Coachmen. Arrived in a timely fashion.
by: Dick 06/18/2023
the stairs were fine but the design of the steps was not the best for installation extremely difficult to reach the bolts to secure them
by: Brent 05/17/2023
The product was processed and delivered on time! We installed within 1 1/2 hours start to finish. Very satisfied!!!
by: Jon 03/02/2023
Great customer service and technical su pport!
by: David 07/03/2022
Good price and prompt shipping. This step replaced a six-year old broken and rusted step of the same make and model on my RV so installation was straightforward.
by: Kevin 03/25/2023
Perfect fit. Much better that older model.
by: Tom02/19/2019
Great replacement product - great service as always from etrailer.
by: Thomas 09/21/2018
Very satisfied.
by: Bob 10/04/2022
We love the new step. We think it is better than the original one.
by: Robert 03/21/2021
They were easy to install and work great no problems would definitely recommend to fellow campers these work great
by: Kimberly04/22/2020
Received my order in a timely mannar. Very happy with my purchase.
by: Michelle 03/20/2024
by: Bob M10/04/2023
Met all expectations and installation was seemless.
by: Jeffrey 01/17/2023
This unit was easy to install and also the wiring harness that came with the unit was in compliance with the stock connectors. I would recommend this product to anyone replacing an old unit or looking for one that can handle more weight. I installed it on my Monaco Windsor 40PDQ with no issues thanks Jeff.
by: Brett 04/23/2023
This step is so much better than the stock step in our RV. It’s lighter, thinner, and the motor is on top and not on the bottom exposed to the elements.
by: Len F03/26/2016
Love the product. It was not welded in a jig properly - out of square! I had to take apart and twist the steel frame straight. Lucky for me I am a former machinist and building contractor. Now it glides in and out smoothly. Over all it is quality material, just needs a little more care at the manufacturing level. I will still purchase from "etrailer".
by: Bob P08/12/2016
Received steps today. I have a 2008 KZ Escalade and already had removed the steps. They fit right up after I removed the top strap. The strap is replaced by the outriggers for support. I used a floor jack and piece of plywood under the steps to get them into position. Drilled new holes because the step bracket would not allow the steps to go up enough to meet the bracket holes, not a big deal. I spent about an hour and a half installing. I am very pleased with the quality and extremely satisfied with the Staff at Etrailer. I will continue to purchase from Etrailer because they make it right if there is any problem. Thanks Etrailer.
by: Mike B.03/19/2015
My wife and i saw these steps on several trailers at an rv show. Talk about night and day. My trailer is a 2015 70k trailer and the steps that came with(2 )bounced and wobbled like most steps(my 5th trailer). Not these lippert lights. I HIGHLY recommend !
by: William03/19/2018
These are the exact replacement for the steps that I damaged on my trailer. Kim was very helpful in helping me place the order and the delivery was quick - only 3 business days. I saved a fair amount by purchasing through etrailer.com as compared to the manufacturer and free shipping too. Can't beat them! This is my second order with them and my first order was also seamless.
by: Roy K07/24/2020
I bought a set of automated steps for my motorhome the salesperson was very helpful and the steps fit my motorhome. Still working great today.
by: Leah 08/23/2022
Works great for our two ambulance side doors.
by: Rex05/24/2022
Order arrived promptly. Step probably should have been shipped in a more substantial carton, rear end of step was partially protruding upon delivery. Nothing appears missing or damaged at this time.
by: Davis 07/14/2022
Really nice construction and it was straight forward to install.
by: Jim07/09/2017
It took 6 weeks to get but they kept me informed. It was held up by the mfg.In 6 weeks i got a email update and asking if i wanted to order another steep orvery pleased get my money back.
25
34
Show More Reviews
See what our Experts say about this Lippert RV and Camper Steps
- What Could Cause Lippert Tread Lite Steps to Be Stuck In Extend PositionThe warranty on the steps is 1 year. I actually am in the process of getting the replacement motor for this kit on our site but am waiting on pricing info based on your previous question. It could be the sensors on the door of your RV that's either failed or fallen off. You might check there to verify that the magnets are there and working properly. These sensors basically are what tells the steps your door is open or closed and needs to retract or extend. Since the step is stuck in the...
view full answer... - Install Video for Lippert Powered Steps on CamperWhile we don't have an install video for the specific Tread Lite step you mentioned part # LC353543 I did attach an install video for a similar Lippert Kwikee step that will show you the basics of a step install for you to check out.
view full answer... - Replacement Motor for Lippert Tread Lite RV StepsThe replacement motor you need is the # LC183058 for the Lippert Tread Lite steps # LC353543 that you referenced. It could be the sensors on the door of your RV that's either failed or fallen off. You might check there to verify that the magnets are there and working properly. These sensors basically are what tells the steps your door is open or closed and needs to retract or extend. Since the step is stuck in the out position and the magnets being near each other is what tells the steps...
view full answer... - Replacement Lippert 334850 Step Control Switch The 334850 part number you mentioned refers to the Replacement Control Switch # LC334850. This particular unit replaces the control switch assembly for certain Lippert Tread Lite RV Steps ( # LC353542, # LC353543, # LC353620, or # LC353621).
view full answer... - Is Lipper Tread Lite RV Step WaterproofYes the Replacement Motor for Lippert Tread Lite Powered RV Steps # LC183058 is a waterproof enough that if you drove in rain it would not start going in and out on you. For a Tread Lite step that is 23-7/8 inches wide we have the part # LC353543.
view full answer... - Motor Clicking on Tread Lite Electric Double StepsA clicking motor on your Tread Lite Electric Double Steps # LC353543 or # LC353621 is indicative there is an issue with the motor not sensing the proper amperage at the end of the extension cycle, which is what tells it to shut off when it is finished extending. So the best option is going to be to replace the motor with the Replacement Motor for Lippert Tread Lite Powered RV Steps # LC183058. I have added a link below to a video review for you to check out as well if you'd like to take...
view full answer... - Troubleshooting Lippert Electric Tread Lite Steps That Only Work When Engine is RunningThis is a really interesting problem but something is going on with the wiring and the step switch you mentioned not working seems like it could be a clue. What I would do is use a circuit tester like part # PTW2993 to test all of the wires that lead to the step with the engine running and with the engine off till you find the circuit that is getting voltage only when the vehicle is running. Once you find that you'll need to closely examine that circuit to determine why that's the case...
view full answer... - Height Measurement from Top Step to Top of Mounting BracketThe Lippert Electric Tread Lite Step for RVs # LC353543 has a top step that measures 4-1/2 inches from the top of the step to the top of the bracket frame. I confirmed this with my contact at Lippert/HappiJac who makes this step.
view full answer...
- Does Lippert Tread Lite Step part # LC353543 Come with Everything Needed to InstallHey Chynna, the Lippert Tread Lite steps part # LC353543 that you referenced is a complete step kit. It includes the motor, gear box, control module etc. Basically it comes with everything needed to complete the install.
view full answer... - Can the Brophy Scissor Steps Be Mounted to Expedition Motor HomeThe Brophy Scissor Steps # SS04 that you referenced have a universal-type design so they will fit a wide variety of different applications. If the bottom of the door on your Expedition motor home measures between 31 inches and 40 inches above the ground, the # SS04 will work well for you. These steps measure 18 inches wide. Keep in mind that these steps are not designed or intended to be kept mounted while the motor home is in travel. They would need to be removed before the vehicle begins...
view full answer... - Install Instructions For Door Magnet On Lippert Electric Tread Lite StepsThe easiest way to do this is to replace the original magnet with the new magnet. If you don't have a magnet already, start with the motorhome side first, see where the door lands and apply your new magnet to the door with the provided adhesive tape. I have included a picture to help guide you. I will also link an install video.
view full answer...
- Are There Any 3-Step Lippert Tread Lite RV Electric Steps Available The Tread Lite line from Lippert only comes in single or double step options so you'll need to go with one of Lippert's Kwikee RV Electric Step models instead. We have three options available depending on your mounting bracket width: Kwikee Electric RV Step Complete Assembly # LC3658373 Mounting plate: 23-3/4" wide x 11-3/8" deep Bolt pattern: 22" wide x 8" deep Kwikee Electric RV Step Complete Assembly # LC3694042 Mounting plate: 26-5/16" wide x 10-1/2" deep Bolt pattern: 25-1/4" wide...
view full answer... - What Steps Does Replacement Step Control Module for Lippert Tread Lite Work OnYou will need specific steps from Lippert in order to use the Replacement Step Control Module for Lippert Components Tread Lite Powered RV Steps # LC334850. This is a replacement part that is specific to Lippert Electric Tread Lite Steps so you will need to have one of the following step parts in order to use this, as we would not be able to verify its compatibility on any other steps. It will work with the following: - Lippert Electric Tread Lite Step for RVs - Single - 24" Wide # LC353542 -...
view full answer... - RV Steps Troubleshooting Where Module and Wiring Is GoodSounds like the motor is bad then if the module and wiring is good. If the steps you have are the Lippert Tread Lites like part # LC353543 that you referenced the correct replacement motor would then be the # LC183058. If you have something else let me know and I'll see what you'd need.
view full answer... - What are the Overall Dimensions of the # LC353543 when Fully Closed? I went ahead and pulled the Lippert Electric Tread Lite Step for RVs - Double # LC353543 from our warehouse to measure. When completely closed, it measures 26 inches long x 17.5 inches wide x 7.75 inches high. I included a diagram of these measurements to provide you with perspective.
view full answer...
- Does The Lippert Solid Stance RV Step Support Work With The Lippert Tread Lite Steps?Since your Lippert Electric Tread Lite Step for RVs # LC353543 is made of aluminum, the Lippert Solid Stance RV Step Support # LC96BJ will not work for you, unfortunately. instead, you'd need steps made of steel like the Lippert Manual Pull-Out Step for RVs # LC432687. You will also need at least 5" of ground clearance to ensure you have a proper fit. I have attached a couple videos for you to check out as well.
view full answer... - What Lippert Powered Steps are on Coachmen Mirada 35BHThe exact step you have is the Lippert Electric Tread Lite Step for RV # LC353543. Since the motor and linkage of the step set can't be accessed from the bottom you'll have to un-bolt the steps to access the motor area and see what the issue is. From there you should be able to see where the problem is.
view full answer... - Can Rocker Switch Replace Magnet for RV Steps Extension FunctionYes, you can use the Center Rocker Switch # LC371010 in place of the magnet that comes with the Lippert Electric Tread Lite Step for RVs # LC353543 - you'll just wire the rocker switch directly to the motor like you see in the attached photo. For the extra wiring you'll need 10 Gauge Wire # 10-2-1 and Butt Connectors # DW05745-10.
view full answer...
- Lippert Electric Tread Lite Steps Stuck OpenThis can be a number of possibilities why your Lippert Electric Tread Lite Step for RVs # LC353543 are not working properly, sometimes, the steps will not retract if the door and door frame magnet switches aren’t perfectly aligned. These components need to be perfectly aligned to ensure operational success. It would also be a good idea to check that the grounding wires are making a solid connection to the chassis of the motorhome or trailer and should not have rust between the connections.
view full answer... - Step Similar to Lippert Tread Lite that is Manual Pull Out StepFor a double step that is 24 inches wide and is a manual pull out step we have the part # SMFP-2100 which is pretty similar to the # LC353543 without the motor.
view full answer... - What Might Cause RV Tread Lite Steps to be Stuck in Open PositionIt could be the sensors on the door of your RV that's either failed or fallen off. You might check there to verify that the magnets are there and working properly. These sensors basically are what tells the steps your door is open or closed and needs to retract or extend. Since the step is stuck in the out position and the magnets being near each other is what tells the steps to retract it's very possible your magnets aren't getting close to each other for some reason.
view full answer... - Open Height of the Triple Lippert Tread Lite StepWhen extended out the steps you mentioned # LC353543 will be a total of 32-7/8 inches tall from where they mount to the vehicle. You'd want at least 40 inches from the ground to where you would mount these otherwise they would be too tall to work ideally. What is the distance you have from the ground to where you want to mount steps?
view full answer...
Do you have a question about this RV and Camper Step?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Kathleen M
Updated by:
Shelly K
Updated by:
Halie H
Written by:
Chelsea B
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Helen
6/11/2023
Everything works like it should. No issues.