Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
These 8" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.
Features:
Specs:
Will Flexco Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The Flexco pull-out steps from Stromberg Carlson are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 23-5/8" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 21-1/16" wide to 28-1/4" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 3" to 9" to account for the drop from the bottom steps to the ground. This measurement will also tell you how many steps you need.
The chart below displays mounting bracket width measurements in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Mounting Bracket Width | Entry Height | Part Number |
|---|---|---|
| 21-1/16" | 14-1/2" - 17-1/2" | SMFP-1120 |
| 23-5/8" | 19" - 22" | SMFP-2120 |
| 24-1/4" | 10-1/2" - 13-1/2" | SMFP-1220 |
| 25" | 14-1/2" - 17-1/2" | SMFP-1100 |
| 26" | 19" - 22" | SMFP-2100 |
| 27-1/8" | 30" - 33" | SMFP-3200L |
| 28-1/8" | 26" - 29" | SMFP-3100 |
| 28-1/8" | 34" - 37" | SMFP-4400 |
| 28-1/4" | 10-1/2" - 13-1/2" | SMFP-1200 |
How Do You Install the Steps?
To install the steps:
-Set aside steps before drilling
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (601 Customer Reviews)
These 8" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.After adding a plate to one side of the step and
Redrilling to line up the existing holes,was bolted to the frame. Feels solid, durable and looks good.
What I expected. Quality built produce. Installation was a bit more involved than I had hoped, but went rather easy.
We had a single step that was to high a step. The double step has resolved that problem.
"Yea Baby!" My sister looked online for steps until she was tired of looking because she wasn't sure if they were the right size. I think I googled 22 inch steps and it led me to etrailer in just a few minutes. There I found a diagram that gave me the exact measurements of the mounting holes so I was able to see that they matched the previous ones. We ordered around 8 PM on Monday evening. The steps were delivered on Thursday. My sister installed them by herself using the shipping box to hold them up while she inserted the screws. They work perfect. The price was better than anything my sister had looked at. They arrived in 3 days. "UNREAL", but I'll take it :)
My rating is no joke. Shiela C. was incredibly helpful, and she did everything she told me she would do. She kept in touch with me throughout the process, and informed me my package had been delivered the same day she told me it would be.
I will look forward to doing more business in the future. Thank you from a very happy client.
The steps have worked really well. Glad we made the purchase.
Bought these RV steps for our pontoon boat. They work great and make it much easier for us and our dog to get on and off the boat when it's moored at the lake shore. Great product at a good price!
Due to the edition of an second axel and 14" rims existing single step need to be replaced. This step fit the bill perfectly bolt on no weld couldn't be easer good price..
As a past customer of etrailer.com, I was happily suprised to find them via Google as a supplier of Flexor RV folding step. I had acceseed many sites, but had no confidence that what i was looking at woild replace the damaged beyond repair steps on my hybrid camper trailer. When I opened the etrailer.com web site, I looged into my existing account and started looking through products for an exact replacement thinking I would have to look at specs for each to see if the measurements matched. Imagine my further suprise that when I got to the RV folding steps product section, I was quiried as to the year, make and model of my Flagstaff Shamrock 19 camper and the exact steps I need were listesd and available. I just received them vis UPS Ground three days after ordering and I verified by measurement that tese are the exact match to the factory installed now damagd step. I will install them myself and save hundreds inmparts and labor over the estimate I got from a local RV sales & service outfit. Gotta love etrailer.com!!!
Clifford J.
11/22/2020
Great! Functions exactly as the original. I had a bit of difficulty installing it because of damage tio the mounting places on the RV, not the replacement folding step. With that overcome, the replacement steps have performed flawlessly.
They installed rather easy, on my installation,I had to add spacers to make up the difference between mount and steps. Not a big deal. I think they will work fine..great job etrailer for quick service and good prices..will be shopping here again, I'm sure!!
Alan
7/31/2021
They work great, added a small support under them to stabilize them.
Works perfectly. Was a different than the old 1968 single step so modifications to the Trailer were necessary. Fortunately I can fabricate steel and weld. This is Not a simple replacement. To complicate matters the old step was welded to the Trailer frame Before they built the Trailer.
The steps appear to be of excellent quality, and they fit into the mounting brackets of my old step. These steps replaced the manufacturer-installed single step, making it much easier now to get in and out of the camper. In my case, I ordered the stabilizer jack for additional support, since these new steps are much heavier than the single one they replaced, and this should relieve some of the stress on the mounts. The price was great, and delivery was quick. I'm very satisfied with my purchase.
The original single, pull-out step had been removed from the used camper that we purchased. After improving the floor and frame supports, the new SMFP-2120 double pull-out step fits perfectly and is much stronger and convenient than the original. As usual, your shipping, follow up and customer support was excellent. Thanks.
Ordered the steps on Saturday and they were shipped the same day. Mr. Brown delivered them on Thursday and installed. Straight forward installation , no hardware included but it can be different for each application and it’s only six bolts . I ordered the double step as these are for a Toyota 4x4 RV we are restoring for my son , I was concerned that standing on the bottom step would bow them with weight that far off center . They seem to be good quality and only moved a small amount as expected. I bolted the steps instead of welding just Incase off-roading got exciting and something got bent, ( not my kid) ??. I would suggest using all six points of attachment for maximum strength .
Now, these are steps! No more having a movable stool that gets moved to some other place than at the door. Just love them!
Lou
6/22/2015
Larry,Can you deploy one step alone or do you have to deploy both steps, no matter what?
Larry
5/26/2016
GREAT!!
I bought these for are pop-up trailer. We bought the pop-up used and the PO raised the axle and put on bigger tires, it is nice but it made it a little higher then the wife could step, we use a portable step while camping but the grandkids always needed the step for something and the took it leaving the Misses inside. So I seen these in E-trailer and have dealt with them before and their service is always great and the products are first class.
Thank you E-trailer for being a great company.
Fred K.
Needed a replacement set of steps for my travel trailer. etrailer product description had detailed measurements shown, made it easy to find the steps I needed. When they arrived it 10 minutes to install!
This step was easy to install and was just what I needed to get that extra ease of getting into my popup that I needed given my original single step was too high off the ground. After a year of use, the steps are still in great shape and working awesome. We usually go camping 8 to 9 times a year and have had no issues.
I forgot to pull up the steps on my travel trailer and destroyed them hitting a concrete pillar. These are an exact replacement and work fine. It's nice to have a place to get replacement parts without having to go to an RV dealer.
I had hit a rock pulling out of a campground and bent my trailer entry stairs beyond repair. I ordered this from etrailer and received it in three days. It was the exact OE replacement for my Rockwood BHESP trailer. Easy to install--I used the box it came in to help guide it in place.
I forgot to put up my steps one time when I left a campsite and completely mangled them on a rock. Dealer cost to replace $175. eTrailer < $90 for the exact same model. Thanks eTrailer for making my mistake less costly!
Great Steps. Just like the orig ones!
These Steps were put on New Camper
I had a accident and tore up the
Orig that came on camper.
This is a great company to order
Parts from! Deborah H and Michelle S
Excellent customer service!!!??
Fast Delivery Thanks!!!!
The steps were exactly as specified and fit perfectyly on our slide in camper. Only difference from old step was where the drilled holes were .
Steps work great, bolted right on. Work
absolutely as advertised. I appreciate doing business with e-trailer. Even during a Pandemic they still provide amazing same day service.
I had to drill a few holes to make fit lower to ground than wanted my fault seven inch been better quality steps enjoy having them harold
Do you have a question about this RV and Camper Step?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
David
8/17/2023
We had a single step on our trailer and purchased the double step. We are very pleased with the product and it is easy to open and close.