Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the electric steps, motor, and switch kit for your Kwikee 32 series RV steps. Motor extends and retracts the steps when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.
Features:
Specs:
Note: This step assembly includes the steps, motor, and switch kit only. The steps will operate manually through the switch kit.
If you want the complete step assembly that allows the steps to automatically extend and retract with the RV door, you will need a control unit. The switch kit included with this assembly will still work, but if you want to be able to override the automatic retraction, so the steps stay out whether the door is open or closed, you will need a different switch kit. The complete assembly with steps, motor, control unit, and switch kit is available under part number LC372261.
The included 4-way plug fits into the existing wiring harness on your RV. Most vehicles should have this wiring already set up. In the event that your RV is missing the wiring, a 4-way pigtail is included to help you hardwire the unit to your RV.
The Kwikee steps include several safety features in an effort to prevent injury to you or your passengers and damage to the RV steps. If an obstruction is detected while extending, the steps will halt and retract back into the stowed position. The steps will also retract when you turn on the vehicles ignition, even if the automatic retraction override has been activated, in case you forget to stow them before driving away.
Will Kwikee Electric Steps Work for You?
Electric steps are typically installed on RVs and some travel trailers. The electric steps from Kwikee install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Kwikee electric steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the doorframe, and measure the width and depth. You will need a mounting space that is at least 25-1/2" wide and 11-3/8" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 24-3/4" wide to 37-1/4" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To decide on how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 6" to 8" to account for the drop from the bottom step to the ground. This measurement will also tell you how many steps you need.
The chart below displays mounting bracket widths in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Mounting Bracket Width | Entry Height | Part Number (Complete Assembly) | Part Number (Replacement Assembly) |
|---|---|---|---|
| 24-3/4" | 15-5/8" - 17-5/8" | LC3747453 | LC3747452*, LC3747451** |
| 25" | 16-3/4" - 18-3/4" | LC3724742 | n/a |
| 25-1/2" | 27-7/8" - 29-7/8" | LC3658373 | LC369552*, LC365837* |
| 25-1/2" | 20-1/8" - 22-1/8" | LC372261 | LC3722615*, LC3722617**, LC3722616*** |
| 25-1/2" | 20-1/2" - 22-1/2" | n/a | LC3725791* |
| 25-1/2" | 12-1/8" - 14-1/8" | LC3723383 | LC372338** |
| 25-1/4" | 13" - 15" | LC3711363 | LC371136*, LC3711361** |
| 25-3/4" | 22-7/8" - 24-7/8" | n/a | LC372558* |
| 25-5/8" | 11-7/8" - 13-7/8" | LC3691461 | LC369146*, LC3691462** |
| 25-5/8" | 13" - 15" | n/a | LC3726041* |
| 25-7/8" | 23-1/4" - 25-1/4" | LC3726892 | LC3726891** |
| 26-5/16" | 27-1/4" - 29-1/4" | LC3694042 | n/a |
| 29-3/8" | 18" - 20" | LC3722661 | LC372266*, LC3722662** |
| 30-1/4" | 15-1/4" - 17-1/4" | n/a | LC372779* |
| 30-3/8" | 17-1/4" - 19-1/4" | n/a | LC427247* |
| 30-5/8" | 20-1/2" - 22-1/2" | n/a | LC375632* |
| 31-1/2" | 28-5/8" - 30-5/8" | n/a | LC375821* |
| 31-1/2" | 12-3/8" - 14-3/8" | LC3756271 | LC3756272** |
| 32-3/8" | 20-1/4" - 22-1/4" | LC3722862 | LC3722863** |
| 37-1/4" | 18" - 20" | n/a | LC3694112*, LC369411*** |
*Motor and control unit
**Motor and switch kit
***Motor only
How Do You Install the Steps?
To install the steps:
-Set aside steps before drilling
-Make sure bracket is backed up fully against the I-beam on the chassis
-Hardware not included
Average Customer Rating: 4.8 out of 5 stars (221 Customer Reviews)
Replaces the electric steps, motor, and switch kit for your Kwikee 32 series RV steps. Motor extends and retracts the steps when it receives the signal from the switch kit. Wiring pigtail hardwires to your RV's power.I think you told me to order the wrong steps! I have a motor home with auto steps why would you tell me the part# for manual steps Bryce? and now I paid all this money to have the aggravation of not being able to install them, Which is now gonna put me another week behind or more for my assignment making me lose more money because I'm stranded on the side of the road waiting for the correct steps...I'll have to send the manual steps back and wait for the correct "Automatic steps for a Motorhome, Ridiculous!!!
Great step, removed old bolted on the new connect wire harness works great. One happy camper
Excellent prices and service. Samantha was very helpful. The steps I ordered went on easily, great quality and eat installation.
Andrew
3/25/2022
Great product! Easy to install although heavy and has worked perfectly. Highly recommended
GOOD
1. It was an exact replacement for the step assembly that it was replacing. This means to install Bolted the new assembly in using the same mounting as the original. Just 4 5/16 bolts.
BAD
1. It was my misunderstanding, but the light and direction control required to make the step go in and out was not part of what I purchased. I needed to take this part off the old assembly and bolt and wire it to the new step. FORTUNATELY, the problem with my step assembly was the motor and not the controller unit.
2. The box delivered was heavy. The unit weight ripped open the shipping container in transit.
3. The material recommended to lubricate the step assembly was not included. I was told that eTrailer does not sell it.
4. The manual provided has no information about how to install the unit mechanically. There is no way to open the stair assembly. The mounting bolts are very difficult to reach with the stairs retracted.
The staff was really helpfull. I was not sure abuot the model and they guided me all time and gave me options. The item came on time and it had a perfect fitment.
thanks
Works great! You’ll need a Jack to hold in place to replace the mounting bolts. Saved about $300 over other vendors for the same product JD
HAVENT PUT THEM ON YET BUT THE SERVICE HAS BEEN PHENOMENAL
Great product fast delivery
Received on time and as described. Followed up with sending me extra free fasteners that I needed. Best price.
Arrived as scheduled, easy to install. Just had to swap the controller from old stairs to new stairs. All the mounting holes were the same as original.
Instructions were confusing and did not give simple details for installation of wiring. We had to run new wires and skip the ones that were original to our RV but once we figured out the switch, it was straightforward. The unit is very heavy so needed 2 guys to install it.
Perfect fit, motor is so quiet. Had to use my old control module and light (FYI) . I was worried the metal would not be a thick enough gauge. I was happy to see it was heavier gauge than my original Kwickee 326000. The local dealer wanted about $300. More than etailer.com,
These were purchased and installed on a customer RV and the were well pleased.
Received steps promptly and installed and they work great
Exact replacement for what I had , all holes matched , no problems with anything .
David W.
10/22/2023
Flawlessly .., great product
Works great.
Was completely satisfied with the product and delivery time!
fast delivery
Just what I needed. Great price. Fast and free delivery
Quick service
Do you have a question about this RV and Camper Step?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
11/8/2022
I am sorry to hear that you had been advised incorrectly. We take pride in our expert service, and appreciate any and all feedback, so that we can better our service in the future. I see that our customer service department is actively working on getting this corrected for you. Once you receive the correct steps, we would love to hear your updated feedback.