Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs
(603 reviews)
Price: $275.26
In Stock
Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs
Item # SMFP-2100
Retail:$326.06
Our Price: $275.26
You Save: $50.80
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (603)
- Q & A (0)
- Photos
Stromberg Carlson RV Steps - SMFP-2100
- Towable Camper
- Pull-Out Step
- 2 Steps
- No Ground Contact
- 8 Inch Drop/Rise
- 24 Inch Wide Step
- 27-5/8 Inch Wide
- Steel
- Stromberg Carlson
These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.
Features:
- Manually operated RV steps make it easy to get into and out of your motor home
- Simply pull steps out for use and position back in place for travel
- Non-slip surface with oval tread holes provides sure footing
- 1-1/2" Wide strip of grip tape on edge of steps offers additional traction
- Rust-resistant black powder coated steel is strong and durable
- Easy bolt-on or weld-on installation
- Mounts to RV frame in same manner as original steps
- Mounting hardware not included
- May require outriggers (sold separately) for installation
- Made in the USA
Specs:
- Entry height: 19" - 22"
- Step dimensions: 24" wide x 9" deep
- Mounting bracket dimensions: 26" wide x 9-7/16" tall x 12" deep
- Drop/Rise: 8"
- Weight capacity: 300 lbs
- 1-Year warranty
Will Flexco Pull-Out Steps Work for You?
Pull-out steps are typically installed on travel trailers. The Flexco pull-out steps from Stromberg Carlson are easy to install and fold up underneath the camper for simple storage. To ensure you choose the correct size for your application, there are a few measurements you will need to take.
The Lippert pull-out steps attach to the underside of the camper chassis, directly beneath the doorway. To decide which size you'll need, locate the space available underneath your camper that lines up with the door frame, and measure the width and depth. You will need a mounting space that is at least 26" wide and 12" deep.
If it turns out you have more or less space beneath your doorway, there are other step assemblies available with bracket sizes ranging from 21-1/16" wide to 28-1/4" wide. A full list of the available steps is below.
Outriggers - metal brackets that act as an extension (LC301704 - sold separately) - may be needed for installation depending on the model of your original stairs. These provide extra length if the old steps are longer or wider than the new.
Once you know where the mounting bracket will go and what size mounting bracket you need, that spot will be used as the "mounting point" to determine how many steps you will need.
How Many Steps Do You Need?
To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when they're fully extended, plus 3" to 9" to account for the drop from the bottom steps to the ground. This measurement will also tell you how many steps you need.
The chart below displays mounting bracket width measurements in the first column and entry height measurements in the second column. The third column shows the corresponding part numbers. Use the mounting bracket width and entry height measurements you took to determine which part number will fit your RV. Choose the bracket size that is closest to your measurements without going over.
This page's step assembly is in bold text.
| Mounting Bracket Width | Entry Height | Part Number |
|---|---|---|
| 21-1/16" | 14-1/2" - 17-1/2" | SMFP-1120 |
| 23-5/8" | 19" - 22" | SMFP-2120 |
| 24-1/4" | 10-1/2" - 13-1/2" | SMFP-1220 |
| 25" | 14-1/2" - 17-1/2" | SMFP-1100 |
| 26" | 19" - 22" | SMFP-2100 |
| 27-1/8" | 30" - 33" | SMFP-3200L |
| 28-1/8" | 26" - 29" | SMFP-3100 |
| 28-1/8" | 34" - 37" | SMFP-4400 |
| 28-1/4" | 10-1/2" - 13-1/2" | SMFP-1200 |
How Do You Install the Steps?
To install the steps:
- Make sure the camper is level on flat ground
- Lift the steps into the mounting space and prop into place
- If needed, mark the mounting holes on the camper and drill
-Set aside steps before drilling
- If needed, install the outriggers
- Align step mounting holes and secure in place with carriage bolts and flange lock nuts
-Make sure the bracket is backed up fully against the I-beam on the chassis
-Hardware not included
- Tighten hardware until snug
- Make sure assembly is sitting square and level
- Torque the hardware tight
SMFP-2100 Stromberg Carlson Flexco Manual RV Steps - Two - Black - Folding - 24 Inch
Similar to Hickory Springs 98224EXTALC1
California residents: click here
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Defective
- Product did not meet expectations
Customer Reviews
Flexco Manual Pull-Out Steps for RVs - Double - 8" Drop/Rise - 24" Wide - 300 lbs - SMFP-2100
Average Customer Rating: 4.8 out of 5 stars (603 Customer Reviews)
These 9" deep, pull-out steps let you safely enter and exit your RV. Slip-resistant steps slide effortlessly into their mounting base and lock into place for travel. Bolt or weld onto your RV. Black powder coated steel is rust resistant.by: Kirk 12/28/2023
The steps fit perfectly. Minor adjustments were needed on the left side as the bottom step did not touch the stop until you put weight on it.
by: David06/02/2018
This is the 2nd one of these steps I have purchased and they work great. I have a bandwagon I use for playing in Mardi Gras parades and have one of these mounted on the front and back of the bandwagon. They are durable and have no problem supporting the weight of the musicians getting on and off the bandwagon.
by: David W. Savadge07/21/2018
Received steps right on schedule and the fit with just minor adjustments, such as elongating two mounting holes. We believe they’ll work great as the single step was physically hard for my wife to get in and out of trailer. Only one problem is they didn’t retract easily at first until I readjusted the step arms. We’re pleased as these steps saved us money, time, and inconvience of having an RV shop order them and install that is always pricey!
by: Jimmy A. 09/29/2016
Got the step in just a few days. Took about fifteen minuets to put on. Had just single step but it 12 inches from the door. This double step is 9 inches. Might not seem like much but when you have bad knees the inches may as well be feet. Can still go up about two more inches but have to modify the bracket that is welded to the camper frame. But we love the double step. Trying it out this weekend. Thank you for having a web sight. Sure makes my life better. I know where to go for thing like this double step. I highly recommend etrailor. Great company.
by: Sherri05/12/2022
Just what we needed. Fit original location perfectly. We raised our RV 4 in. So this was perfect adjustment for getting in and out camper. I like it a lot better than the one step we had.
by: Kathleen 05/21/2023
Although the measurements given in the description said the step should fit, we had to have the mounting bracket modified to make it fit our Salem Lite trailer
Once that was done, the step makes it much easier to enter and exit the trailer.
by: Bob G. 05/19/2017
Bought these steps to replace single step on my Rpod 177. We have the lift kit on the axle, so the single step was difficult to get up and down on. This unit slid between the welded bracket with some persuasion. I had to enlarge the rear bolt holes on the bracket. Very pleased with the layout of the steps now!
by: Keith07/15/2018
It installed easily with two people and clamps. It was what I wanted to get into food truck easier.
by: Samuel10/17/2018
My camper came with one step. We tried several step stools and after falling several times I found this item and the price was low. I had to do a little cutting of corners to mount, but it worked like a champ. It only took me about 2 hours and it took the place of the single step. We love it. It looks like it was factory installed.
by: Sandra04/10/2018
The steps were to arrive by 8 pm on Monday, were surprised when UPS delivered them on Saturday afternoon!
The installation wasn't as easy as we hoped, had to notch the back and drill out the back hole on both sides. No install instructions, but we got it installed. I think the double step will make our knees happy. Service was great.
Sandy
4/10/2019
I recommend this 2-step, with its higher weight limit, it handles weight very good. Its great for our old knees. Our R-POD has the lift kit, and was a bit of a struggle to get up and down the steps with arms full. Now its a breeze. As someone mentioned, it sticks occasionally, but Ive found if I reach above the steps and pull from behind, it comes out with ease.
by: Robert09/05/2015
These steps are great. Very solid and spaced just right. A vast improvement over the OEM single step. Highly recommend. This is my third order from etrailer and I couldn't be more satisfied with the quality of their offered products, their rapid response and shipment, and their customer followup and service. When the need arises, I will buy from them again.
Robert
9/4/2016
Alls well
by: Fieldmech08/07/2016
Very nice well built set of steps. Great service from etrailer , steps sent 3day select on the 99.00 free shipping . Great.
Fieldmech
8/7/2017
The steps are great. Work perfect
by: Ron A.07/23/2020
Easy install! Looks great! Sturdy!
Picture looks like stairs are lopsided. It's the picture taker.
by: James06/05/2018
REALLY need some suggested mounting methods suited to particular trailers. How would you like to buy a couple of airplane wings with no suggestion as to what they would fit and how to mount them?
Mike L.
6/6/2018
This particular step has a 27-5/8 inch wide mounting bracket. The best way to determine the correct steps for your application is to measure the width of the mounting bracket of your existing steps, and compare that dimension to the available steps.
by: James H03/01/2020
My wife especially likes the two-step approach to the trailer door, much better than the original that could be kinda high off the ground. (We're way past seventy, so...) Trailers are not built to a universal standard so I had to do a bit of drilling to get it mounted, but I am handy with tools.
I like the hefty design. I'm a mechanical design engineer and I am impressed. (Just keep in mind as you travel that it unavoidably rides a little closer to the road. There's no way to design that away.)
It's a fine piece of work.
by: Rod A12/13/2015
I ordered 2 products from etrailer. The Flexco double step and the Brophy stabilizer clamp. Shipping was fast and the products are just as advertised.
Our camp trailer came with a single step and it was just too high to be comfortable entering and exiting the trailer. Some friends told us about etrailer so I decided to give the website a look. I found exactly what I was looking for and the price was the lowest I found anywhere. I installed the step today and it really made a difference.
The brophy stabilizer clamp did just what I needed it to do. I did have to mount it in the opposite direction because of the way my hitch is attached but the included instructions covered this as being a possibility.
Great prices, fast shipping and products as advertised. It doesn't get any better than that! I will order from etrailer again!
by: jimP09/30/2015
Easy to install. Had to slot my mount about a 1/4 inch, but whole install took less than a half hour.
by: Gary P.09/25/2015
I replaced the OEM single step on my Forest River Evo trailer with this double step. The OEM step was mounted by the sides, to plates that stick down about 8" from the bottom of the trailer, and are welded to the frame of the trailer. This double step has sliding pins that stick out of the sides about 1" and prevent the step from fitting between the trailers mounting plates. I had to cut away a 3" by 10" piece from the bottom of each of the plates to allow the step to be mounted. It looks and works great once mounted, but you should not purchase this step to mount to side mounting plates unless you have the capability to modify the plates.
by: Gil05/07/2017
With a little retrofitting, this worked perfectly. My wife can now get in and out of our camper with ease. Thanks so much for all your help on choosing the best product for our needs.
Gil J.
5/7/2018
It was perfect for what we needed. A little modification on the hook up to the camper itself but I knew that going in. Makes getting in and out so much simpler with that extra step. I thank you and my wife said to tell you it was a knee saver.
by: Paul C05/28/2017
Installation was simple: clamped in place, drilled holes and bolted to frame. Steps dragged in the channels making them hard to deploy. It took some serious filing to get the clearance necessary for smooth operation. Very safe and sturdy.
by: Brad 01/27/2022
Love these steps. Replaced the original heavy duty ones that came with trailer. The originals were always in the way and needed leveling. These steps are extremely sturdy. And etrailer.com is a great company to support.
by: Grover04/24/2017
Easy to install and a well built replacement for an unbeatable price.
They don't hinge the same way as my old ones, but look so much better!
Notice in the pictures that the hinge bar extends past the step frame on both sides.
On my trailer, these fit within the existing plate mounts. I was not able to use the old bolts from the steps I removed, instead I installed slightly longer ones to complete the installation. Very happy with how these turned out on my trailer.
by: Jeri08/24/2015
We purchased the double step, our camper only had the one step and at time it was a HUGE step to get up into our camper. The stairs are awesome. The only problem (which really wasn't a problem for my husband) was the holes did not line up. We ended re-drilling the back holes and had to buy new plow bolts.
by: Jack R03/07/2017
Steps arrived on time and undamaged. Box in perfect condition. Installed on a 2017 (Green edition) Rpod that had risers installed. Was a tight fit, required some slight tapping to move into position but the tension actually held the steps in place so I could install the bolts. Front bolts perfect but rear holes had to be drilled out so bolts would fit. I knew this going in from other buyers so was not a surprise or a deal breaker. They are heavy duty and fold away in basically the same space as the original steps. Non-skid material is a nice touch. Would have been a "5" if holes lined up perfectly. But then not much in life is perfect.
by: Daniel S07/25/2018
Great product, my previous two step was twice as long and I dragged the ground with it on the maiden voyage home.
The flexco two step is well built, made in the USA, is half as tall when folded with the right stepping distance when extended and half the weight.
I use my RV at least one weekend a month and the new step makes it much more enjoyable.
25
603
Show More Reviews
See what our Experts say about this Stromberg Carlson RV Steps
- Will the Flexco Manual Pull-Out Steps SMFP-2100 Fit 2014 Rockwood Freedom 2318GYou will want to make sure that the dimensions of the Flexco Manual Pull-Out Steps for RVs # SMFP-2100 match up with what you have on your RV. These steps have mounting base dimensions of 27-5/8 inches wide and 8 inches deep. The mounting bolt hole pattern is 24-1/2 inches wide and 7 inches deep. From the top of the mounting bracket to the bottom of the lower step is 12-17/32 inches. This will give you an idea of how much space you will have. Keep in mind that these steps can be bolted...
view full answer... - Recommendation for 2 or 3 Step Assembly with 25-1/4 Inch Wide Mounting BaseI went out to the warehouse to take a look at the Flexco Manual Pull-Out Steps # SMFP-2100 referenced in your question. I actually found that the mounting base on this unit measures 27-5/8 inches wide, so it will be too large to fit between the welded on brackets you mentioned having on your trailer. I instead recommend looking at the Lippert Manual Pull-Out Step # LC432682. This two step assembly does indeed have a mounting base of 25-1/4 inches wide and 8-3/4 inches deep. It features...
view full answer... - Will Manual Pull-Out Steps SMFP-2100 Fit a 2017 Forest River Wildwood XLITE 171RBXLTo determine if manual pull-out steps # SMFP-2100 fit your 2017 Forest River Wildwood you can measure the mounting hole spacing on your existing steps. If they are spaced 24-1/2 inch apart on center left to right and 7 inches on center front to back then these steps will fit. If you have a different measurement let me know what it is. Another thing to consider is ground clearance. Sometimes when you go to a unit with more steps it can cause ground clearance issues because the new steps...
view full answer... - Availability of RV Replacement Slide-Out Steps with Step-Up Height or Rise Shorter than 8 InchesWe do have a manually operated pull-out step, part # LC432682, a 2-step unit that features a 7-inch rise between steps. This might be a better choice and hopefully the 1 inch difference will make a difference for your wife. There is also a 3-step unit, part # LC341501 that also has a 7-inch rise between steps. To determine which unit you need, measure from the mounting surface where the steps would attach down to the ground, and compare that distance with the total height of each unit...
view full answer...
- Does Using Outriggers to Mount RV Steps Raise or Lower the StepsThe outriggers # LC301704 would lower the steps but only by the thickness of the outriggers where they attach to the frame of the trailer assuming that any original mounting holes where in about the same position as those on the outriggers. Otherwise it would lower the steps by about 2 inches.
view full answer... - Overall Side To Side Dimensions Of Flexco Manual Pull-Out StepsThe problem is that the overall measurement at 27-5/8 inches is from the end of the rod that extends out on both sides. The 26-1/8 inches is the dimension of the mounting brackets at the top of the steps. I have attached a photo with dimension noted of the Flexco Manual Pull-Out Steps # SMFP-2100 you can check out.
view full answer...
- Would Flexco Step SMFP-2100 Fit 2017 Keystone Springdale 179QBThe Flexco manual pull out step part # SMFP-2100 will fit your 2017 Keystone Springdale 179QB and most likely would just bolt right to the frame, but worst case scenario you would have to move some mounting brackets around. If you needed outriggers to mount these steps you would want the part # SM-01. These steps are 26 inches wide overall. A lot of steps like this and the Stromberg are made to the same dimensions. The Stromberg you mentioned isn't carried by us anymore but it would fit...
view full answer... - How Do the Flexco Manual Pull-Out Steps SMFP-2100 InstallStep # SMFP-2100 is supposed to mount up to factory holes on the bottom of the frame or it can be welded to the frame. For nuts and bolts use # LC118155-72 if you don't already have some from the old steps. For welding the installation should be performed by a professional welder. In some cases outriggers # LC301704 are needed but that depends on the model of your original stairs. Based on the 26-3/4 inch measurement you would need the outriggers because the center to center mounting holes...
view full answer... - Flexco 2-Step Manual RV Pull-Out Steps for Forest River Travel TrailerFor a set of 2-step Flexco RV manual pull-out steps that are 24-inches wide you can use part # SMFP-2100. This step assembly offers a 350-lb weight capacity and 7-7/8-inches of rise/drop between steps. The 24-inch wide steps are 9-inches deep. Mounting holes are spaced apart 8-inches front-to-back and 26-1/8-inches left-to-right.
view full answer... - Could the Flexco Manual Pull-Out Steps # SMFP-2100 Install on a 1995 Award RVThe Flexco Manual Pull-Out Steps # SMFP-2100 could easily be installed on your RV. It may take some fabrication to get to fit depending on how your current step is set up. But either way this could be made to fit. With this step installed the bottom step would end up only about 5-1/2 inches from the ground so you would not need a handrail stair to use with this but in case you are looking for a hand rail to add to this step you would want the part # AP-101.
view full answer...
- Determining Which Replacement Trailer Steps for 2006 Skyline Weekender Model 180 CamperThe # SMFP-2100 Flexco Manual Pull-Out steps aren't a camper-specific item, it can fit many different applications. You can very easily determine if these will replace your existing steps by measuring them. This unit will fit a well that's up to 27-5/8 inches wide and 12 inches deep. If the available space will accommodate them, these steps would work great for you. I've provided photos showing the dimensions of the step unit. Unfortunately, don't have any information that would tell...
view full answer...
- Upgrading to 2 Steps on a 2017 Salem Cruise Lite 201BHSWe don't have a way of knowing exactly which steps are currently on your trailer however you can use any that you like and will fit. If you measure the mounting bracket of your current steps you can use that to find a replacement. For example, the Flexco Manual Pull-Out Steps # SMFP-2100 have a mounting bolt hole pattern of 24-1/2 inches wide by 7 inches deep. The steps themselves are 24 by 9 inches.
view full answer... - Measurements of Flexco Manual Steps for RVs Double 7-7/8" Drop/Rise 24" Wide 350 lbs SMFP-2100Flexco Manual Pull-Out Steps for RVs - Double - 7-7/8" Drop/Rise - 24" Wide - 350 lbs # SMFP-2100 are from Stromberg-Carlson and are Flexco model steps. So in other words they are one in the same. I included some pictures showing dimensions for you.
view full answer...
- Replacement Double Step Recommendation for Coleman 17 ft CamperAt one point the Flexco Steps part # SMFP-2100 that you referenced were listed as having the same width you need of 26-1/8 inches between the mounting brackets. We now know that the dimension is really 27-5/8 inches. Since we don't have a step that matches directly you'll either need to move your current brackets or have new ones installed with the Outriggers part # LC301704. The steps of this kit have an 8 inch rise whitch is pretty standard and would be a great option.
view full answer... - Recommended 2-Step Upgrade for 2018 Lance 1475s TrailerThe only possible double step upgrade option we have for a 2018 Lance 1475s is the Flexco Manual Pull-Out Steps for RVs part # SMFP-2100. It looks like the only dimensions that won't match up is the mounting flange bolt spacing which is larger on this double so you will need to drill a few holes is all. To determine how many steps you'll need, measure from the mounting point to the ground. This is called the entry height. The entry height should roughly match the height of the steps when...
view full answer...
- Recommended Double Step Assembly to Replace Single Step Flexco on 2017 Forest River TrailerTo replace the single step Flexco step assembly on your Forest River Wolf Pup 16BHS Trailer, I recommend taking a look at the Flexco Manual Pull-Out Steps # SMFP-2100. This double step assembly features 9 inch deep, pull-out steps with a non-slip surface to provide sure footing. It has a mounting base that measures 26-1/8 inches wide and 8 inches deep (and a bolt hole pattern of 24-1/2 inches wide and 7 inches deep). I recommend comparing these dimensions to your current assembly to verify...
view full answer... - Dimensions Of Flexco Manual Pull-Out Steps For Travel Trailer Two StepThe 26-1/8 inches wide at the top is correct and the mounting holes at 24-1/4 x 7 inches are correct for the Flexco Manual Pull-Out Steps for RVs # SMFP-2100. The total width of 27-5/8 inches has to do with the end of the Rod that extends out both sides. I've attached pictures to assist with all the measurements.
view full answer...
- Mounting Hole Spacing on the Flexco Manual Pull-out Steps for RVsThe mounting holes on the Flexco Manual Pull-Out Steps for RVs # SMFP-2100 are 7" apart on the same side of the bracket and 24-1/2" apart across from each other. I have included a picture showing these measurements as well as a few additional measurements so you can be sure these steps are the correct fit or not.
view full answer...
- Recommended Steps For 2008 Dodge DurangoAdding RV steps like the Lippert Components Kwikee 40 Series Double Electric Step with Double Tread # LC3726892 to a 2008 Dodge Durango would require custom welding of brackets as well as enough ground clearance. Although this looks ideal, I assume you'd be looking at a lot of custom fabrication for your vehicle that it isn't intended to handle and could effect other components. My recommendation is to use the Westin Molded, Lighted Running Boards w/ Custom Installation Kit - 6" Wide...
view full answer... - Manual Step Replacement Recommendation for Kwikee 32 Step On RVFor a double step that will fit in replacement of your Kwikee 32 steps part # LC372261 you'd want the Hickory Springs Manual Pull-Out Steps # 98224EXTALC1 as this is only model we carry that's the correct width.
view full answer... - Key Dimensions for Selecting Replacement Triple Step Unit for Jayco Travel TrailerYour photo did not make it through to us but we can still help you select replacement steps for your Jayco Jay Flight 28BHStravel trailer. The RV steps we offer for towable trailers come in several overall widths. You can see all sizes and models on the page I linked for you. You will want to match the overall mounting pattern of the new step to your existing unit. You will also want to ensure the new step unit does not reduce your ground clearance; keep the existing step's retracted height...
view full answer... - Can Single RV Step be Replaced with Double StepThe single pull out steps and the double pull out steps do have the same widths so you would need to measure the width of the single step you have now so that you can pick out the correct double step. So for example the part # SMFP-2100 is 26 inches wide when you measure the outside of the mounting bracket so if that matches what you have it would work. If not, check out the link I attached that shows all of the double steps we offer. You can select the width you need on the filters of the page.
view full answer... - Recommended Storage Cover for Forest River R-Pod 177 Teardrop TrailerClassic Accessories offers a storage cover made specifically for the Forest River R-Pod 177 teardrop trailers, which measure 18-feet, 8-inches in length from end to end as shown in the linked image. You can use part # CA80199. This cover comes with a storage bag and 3-year warranty and features triple-ply construction with moisture-wicking fabric and elasticized hem.
view full answer...
- Replacement 2-Step Entry Step Assembly for 2017 Cruise Lite TrailerTrailer makers typically do not maintain details about items like the steps that they install on their RVs so for you to select a 2-step assembly to replace a single-step unit you'll just need to note some basic dimensions. First, you want to check the size and spacing of the mounting holes on the frame that are used to secure the current steps. Our 2-step assemblies come in 20-inch and 24-inch widths, both shown on the linked page, and the distance between the two steps is also variable....
view full answer...
Do you have a question about this RV Step?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Updated by:
Kathleen M
Updated by:
Shelly K
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Halie H
Updated by:
Mike S
Installed by:
Cole B
Written by:
Samantha S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Samuel L.
10/18/2019
The steps are still working great. I am sure they will hold up for the life of the camper.