Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement lid fits your Ventline or Elixir RV roof vent. Durable polycarbonate is virtually unbreakable. The translucent white lid lets some light through. Integrated, rust-resistant mounting brackets included.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Camco White Replacement Non-Powered Roof Vent Cover for Ventline and Elixir RV roof vents. Now this replacement lid will fit the fourteen inch by fourteen inch Ventline RV roof vent prior to 2008, and the Elixir RV roof vent after 1994. This vent is virtually unbreakable polycarbonate material. It won't crack over time. It is translucent, white color. It'll let some light through.
It is also UV stabilized. As you can see, it is pre-assembled for for quick, easy installation. It has the integrated rust-resistant, galvanized mounting brackets already installed. If you noticed int eh polycarbonate material, there's a nice center reinforced center bar right here for added strength and stability, makes it very strong. I'll give you a few dimensions on this. It's going to be fourteen and three quarters by fourteen and three quarters.
The overall heighth, you're going to be looking at right at two and three quarter inches tall. That should do it for the review on the Camco White Replacement Non-Powered Roof Vent Cover for the Ventline and Elixir RV Roof Vents.
Average Customer Rating: 4.9 out of 5 stars (180 Customer Reviews)
Replacement lid fits your Ventline or Elixir RV roof vent. Durable polycarbonate is virtually unbreakable. The translucent white lid lets some light through. Integrated, rust-resistant mounting brackets included.Roof vent arrived about a week earlier than expected and was packaged well to prevent damage. The part felt much sturdier than the original equipment vent that it replaced. Installation was quick and easy after watching the video.very pleased with the part and etrailer.
These replacement lids are well made, strong, and easy to install. The directions that are printed on the box were most helpful. The vent lids that were on the trailer got smashed by a falling limb from a tree near where it was parked. The web site was very helpful in helping determine the kind of hinge that is on the vents on the trailer.
After one year, still the same. Easy to install, fits perfectly and is a lot thicker than the original. I still expect this to hold up pretty good given that it bakes in the sun all day long and that’s tough on plastics.
Bob
7/4/2022
Just went out and had a look, it still looks like it was new.
Only thing I regret is I forgot to take pictures!,
Otherwise, from ordering to tracking info to order follow-up, etrailer has been one of the best most thought out websites I've visited.
The covers I bought are far superior to the original equipment. They arrived well-packaged, in a timely manner, and I got regular updates as my order made it's way to my door.
I installed one of my roof vents tonight as soon as I opened the package, and since I watched the video etrailer provided on their website, I knew exactly how to install it. The only pain was that the trailer manufacturer got the hinge of the original vent filled with sealant when they sealed the vent upon installation. It took some careful work with a razor knife to free it and remove it. By the time I actually removed it, all the plastic of the original vent basically crumbled in my hands as I worked on it..
I still have another one to install, so I will take pics, and post again.
All in all, I'm absolutely satisfied and impressed with etrailer.com, and super satisfied with the products I purchased.
Good job, guys. You are a quality act, absolutely.
Thank-you.
This replacement lid is SO much more heavy-duty than the flimsy original one (the standard plastic) that was on my trailer vent. I was not sure which lid to go with, (old lid self-destructed, no markings on the vent itself) but a search for how to identify a replacement lid led to a helpful article/discussion on etrailer about checking the vent size and hinge type. Just what I needed. I was able to identify the right one, and selected the polycarbonate replacement lid with the center ridge (more rigidity and stability when traveling down the road). Fit as good as original, seals well, very sturdy. Doesn't vibrate or flap around at highway speeds (like the original lid did). Should last a long time. Thanks etrailer!
I could not find an exact match for my 2011 Livin' Lite VRV trailer's vent lids, but chose these covers due to the Lifetime Guarantee and the unbreakable claim of the polycarbonate material of construction. The continuous hinge design turned out to be a very good match to my existing vents. The metal strut that is used as a track for the crank arm would have worked as delivered, however, it seemed to work better when rotated 180 degrees about its long axis. This is due to the orientation of the crank arm on my oem vents and the U-clip that fits on the end of the crank arm. It is attached by two aluminum rivets, so not a difficult modification. I am very happy with the result.
This product is a vast improvement over the stock version standard on the trailer. Very solid lid.
Installation of this lid was very easy and straight forward. For those other DIYs out there, this is a multi step process. There’s resources on YouTube and Etrailer re: the installation process.
David M. Arizona
These covers seem to be well made and much sturdier than the cheesy ones that they replaced. The other standard units (Ventline, S107-311646) degraded after one year of use and some hail totally obliterated them. Don't waste your money on the $15 cheapos. I expect these units will hold up much better.
The slider rail on these was a bit different than the Ventline units. It was L shaped will the other were straight. Made getting the slider clip a bit harder to secure, but that's OK.
The new White CAM40161 Polycarbonate Roof Vent was the perfect replacement for
the original roof vent on my 2004 HaulMark Race Tailer. The original piece was not Polycarbonate and I am actually surprised it lasted 14 years. The new POLY vent cover should last longer than that. Don't know if I will though.
It only took me about 15 min. to replace it, easy-sqeezy.
Exactly the right replacement for my trailer vent. From the nicely organized website which made it easy to identify the right part, to the fast shipping, to good directions for installation, to quick, easy installation, could not be happier.
I bought these because they are made from a different plastic from most, my stock vents were toast after 5yr cause I dont have a cover for my trailer, these vents are holding up very well and look like they will outlast my old ones
fits great , great customer service
I'm very pleased with the polycarbonate covers that I recently purchased. They are a perfect fit to Ventline lids on my old Caribou, and easy to install. I'm looking forward to leak-free adventures!
We received our replacement fan vent cover quickly and it fit perfectly. The service and the product were A+++++.
Perfect replacement for my Pace Trailer vents.
Appear to be much better quality than the OEM vent lids.
I couldn't find any manufacturer info on my damaged roof vents, so I was reduced to comparing pictures of possible replacements. The pictures on this site were quite sufficient to tell me which model I should order. They arrived promptly and they fit perfectly.
Good sturdy unit. It takes two people to install, one on the roof and one in the RV to operated the crank handle to make the connection to operate. Others no problem.
Great quality & easy installation.
I won't be on the roof for vent lids again!
Was an exact replacement. Much more durable then the oem vent on trailer.
It has worked out very well. Thanks to e-trailer and there group of people. Seems to be of good quality. Highly recommend
I always depend on etrailer for top quality products and support. I'm sure these new vent lids will survive any future hail storm.
fast service, quick delivery. thanks et railer!
Worked like a champ. Just installed since rain was coming. Looking forward to the unbreakable aspect. Shipping was prompt!
product is a perfect fit, much better quality than the original
Charles C.
10/31/2020
Still looks like new much better quality than the original.
super easy to install and much more durable than the cover that came with my trailer.
Do you have a question about this RV Vents and Fan?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Roger S.
8/7/2019
The vent lids are still holding up very well.