Replacement Lid for Elixir RV Roof Vents

Question

Question:

Our 1997 Aliner camper was Mfg with Elixier roof top vents. Their weatherstripped opening measures 12” square. Which of your “Universal vent lids” coorespond to this criteria?

asked by: Eric

0

Expert Reply:

The Replacement Lid for Ventline and Elixir RV Roof Vents, # CAM40161 is for a translucent white color lets some light through and has a slight pyramid shape to it. For a slightly different shape but with the same translucent white color, select # CAM40155 and for a replacement lid for Elixir RV roof vents in a smoke color, # CAM40148. These are all listed as proper replacement lid options for post-1994 Elixir roof vents.

If you have issues with the hinge, you can use the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent, # MA00-335001 for Translucent White and # MA00-335002 for Translucent Smoke. Please note the linked product videos below. For an entire replacement vent assembly, I suggest Ventline Ventadome Trailer Roof Vent, # V2092SP-28.

expert reply by: Michael R

0

Answer 1

For a 14" x 14" vent I recommend the Replacement Lid for Ventline, MaxxAir, Fan-Tastic Vent, Ventadome, Jensen, and Elixir RV Roof Vents #A10-3375 or #A10-3376 for black since it has a bracket to attach it to multiple vent designs. As for…

view full answer...

Answer 2

The correct replacement lid/dome for a MaxxFan* 4751KS is the Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents part #MA10A40009K for black or part #MA10A40002K for white.

view full answer...

Answer 3

Based on the picture you provided it looks you your hinge only has two points of contact. Since we do not have a 2-point hinge replacement I recommend using the Replacement Lid for Jensen, Ventline, Elixir, and Ventadome RV Roof Vents #A10-3375 as it…

view full answer...

Answer 4

The best option I have to replace the roof vent on a trailer where the model number is not know is with the MaxxAir UniMaxx Universal Replacement Lid part #MA00-335002 for smoke or part #MA00-335001 for white. These options will fit any standard…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 7

I recommend the Alpha Systems Butyl Tape for RV Weatherproofing #AL28FJ as it's 1" wide to fully cover the flange of your vent. Make sure you overlap the ends to form a tight waterproof seal. You can see me doing this at 2:50 mark in the…

view full answer...

Answer 8

The Replacement Single Zone Thermostat for Dometic RV Air Conditioners #DMC79FR is a single zone 3 wire thermostat like the one you are describing. I have attached the wiring diagram for this thermostat and the control box below for your reference.

view full answer...

Replacement Lid for Elixir RV Roof Vents

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching