Replacement Lid for Elixir RV Roof Vent

Question

Question:

Where can I buy a old style elixir complete hinge.

asked by: Jerry

0

Expert Reply:

We carry replacement lids for Elixir RV Roof Vents that have the appropriate hinge, which is what I believe you are asking about; the hinge on these lids are not available as a separate entity, however. The replacement lid for your roof vent will be either:

- Replacement Lid for Elixir RV Roof Vent # CAM40156, which fits Elixir RV roof vents from before 1994

- Replacement Lid for Elixir RV Roof Vents # CAM40161, which fits Elixir RV roof vents from after 1994

I have added links to video reviews of both lids for you to take a look at.

expert reply by: Kyle S

0

Answer 1

The key to picking out a replacement lid for a standard 14 x 14-inch trailer roof vent is matching the hinge type. Trailer makers typically don't keep track of smaller items like vents that are used in fabrication of their trailers so you can…

view full answer...

Answer 2

You will want to look at the size and the hinge style when looking for a replacement vent lid. There are different styles of a continuous hinge. If you can snap a pic of the existing hinge on the vent or lid and email that to me I can point out the…

view full answer...

Answer 3

To determine which replacement lid you need you will need to check the hinge on the roof of your vent lid. I have included an chart that has the most common lids and shows the hinges. Once you identify the hinge you will need one of the following…

view full answer...

Answer 4

The Hengs lids we offer do not have continuous metal hinges but we do have a few that do have that hinge style like the #CAM40161 which is a white polycarbonate lid.

view full answer...

Answer 5

There are three types of hinges for replacement roof vents: 3 point, 4 point, and continuous. Replacement #BV0534-00 has a closed round hinge, which is continuous. It sounds like you need either a continuous hinge that is not closed such as…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

I would be happy to. To flat tow your 2017 Ford F-250 you will need the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar item #e84ZR Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item…

view full answer...

Answer 11

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Replacement Lid for Elixir RV Roof Vent

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching