Rivet Nuts for Reese Dual Cam High Performance Weight Distribution - Qty 4
(62 reviews)
Price: $17.86
In Stock
Rivet Nuts for Reese Dual Cam High Performance Weight Distribution - Qty 4
Item # RP58507
Retail:$33.58
Our Price: $17.86
You Save: 47%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (62)
- Q & A (0)
- Videos (1)
- Photos
Reese Accessories and Parts - RP58507
- Weight Distribution Hitch
- Hardware
- Nuts
- Reese
- Dual Cam
Features:
- Fits Reese Dual Cam High Performance weight distribution systems
- Quantity: 4 rivets
58507 Reese Rivets for Dual Cam High Performance Weight Distribution
Installation Details
California residents: click here
Video of Rivet Nuts for Reese Dual Cam High Performance Weight Distribution - Qty 4
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Reese - Weight Distribution - RP58507
Today we're going to take a look at the rivet nuts for the Reese Dual Cam HP Sway Control on tube frame trailers for a quantity of four. Now, these are designed to fit the Reese Dual Cam HP Sway Control, Part Number RP26002, which we do sell separately on our website, and these rivet nuts are designed to be used when you're installing your dual cam frame brackets to a tube frame trailer. Basically you just install these into the trailer frame, drill a hole, and then they're a snug fit. They press fit into it, and it allows the screws for the frame brackets to tighten down and not damage the tube frame.I happened to pull one of the screws that is used when installing those frame brackets, and you can see with this installed, that would screw right into here, so it is designed to fit the 1/2-inch by 13 thread per inch size screws, and this part is for a quantity of four rivet nuts. It comes with a nice set of detailed instructions on how to install them.That should do it for the review on the rivet nuts for the Reese Dual Cam HP Sway Control on tube frame trailers for a quantity of four.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Rivet Nuts for Reese Dual Cam High Performance Weight Distribution - Qty 4 - RP58507
Average Customer Rating: 4.7 out of 5 stars (62 Customer Reviews)
by: David 02/03/2024
Glad I was able to find these, bought a new camper and dealership didn't replace these, they just used self tapping screws.
by: Michael 11/22/2022
So Happy you had the Parts I needed ! etrailer is Great !!
by: Michael 03/11/2024
Etrailer is awesome. Excellent customer service
by: Darrell09/07/2023
Package arrived with messages from the USPS that it was open and contained no contents. I contacted E-Trailer and they promptly offered a replacement shipment or a refund. I took the refund. So to summarize. Poor shipping but great customer service.
by: Tim 10/09/2023
If every company in the US operated like etrailer - well that would be a dream come true - you guys & girls are the best in any business !!
Package arrived 1 day earlier than stated. Etrailer is the ONLY company I never have any concerns with.
by: Keith03/21/2024
Product was fine but shipping was off the charts. There is a better way to ship to Alaska. Use the US Postal Service.
by: Tom W.09/11/2019
Exact replacement part for transferring my Reese weight distribution system to our new trailer. Takes the guess work out of it. Thanks etrailer
by: Danny 05/14/2023
Transferring the Reese anti-sway cams to a new travel trailer. So nice to be able to purchase them separately!
Danny
5/17/2023
outstanding! Absolute must for mounting on the box frame tongue. Very secure!
by: Tom 02/23/2023
Not much to say, when I switched trailers the existing nuts are now part of that trailer so I needed replacements.
by: Robert 10/01/2022
very good service c.s. is great these for my reese dual cam trailer hitch.
by: Joe07/07/2019
Crap. Transferring my Reese trunion bar weight distribution hitch to our new trailer. Followed directions exactly. Drilled the 11/16 holes and inserted the nuts. Both spun freely as it appeared the knurled secrton had a slightly smaller OD. Now I have two large holes in the frame. Ended up putting bushings in the 2 holes and bought some grade 8 bolts and drilled through both sides of the tube frame and bolted the sway control to the frame. Didn't even try the blind nuts on the other side and just drilled the holes large enough for the bolts and bolted it on also. Would give it 0 stars if it was an option.
by: Roger R03/07/2017
I purchased RP58507 'Rivet Nuts' as I had no confidence in the two or three threads holding the 'Cam Lock' sway control staying tight.
I rented a drill and torque wrench required and the installation was fairly painless. The product performed as advertised and the 'cam lock' brackets are still secure after a 1800+ tow in three days. The TT is a Denali 270FK with a dry weight of apx 7800 pds and gross weight towing per Cat Scale of 8887 pds.
by: Ken06/08/2022
The shank is exactly what it says it is. I needed the hitch head about even with the receiver on the truck, this one allowed that. I would of given it 5 stars but etrailers service was extremely disappointing. First it took them a week to actually ship it and they put this 25 pound piece of steel into a single cardboard box with a bit of paper around it. Obviously the box didn't survive the trip. I thought you guys were suppose to be good at this? You should take lesson from [other company] on how to pack materials.
by: Ted08/02/2016
They fit loosely in the hole that is prescribed to drill. Peened steel around hole to tighten up fit. On one of the holes I drilled 1/32" of an inch undersize and used a dremel tool to enlarge the hole slightly. When trying to pound the rivet in place it mushroomed. Very frustrating and not good quality metal at all. The original 1" bolts are too short for these rivets. Had go out and buy 1 1/2". Make sure you get lock washers too. Overall it's very difficult to torque the bolts down because the rivet nuts spin in the hole even though you tighten up the opposing bolt. Not happy with this product. Best to drill through frame and install longer grade 8 bolts. Poor.
by: Robert08/13/2018
Purchased these rivet nuts to replace two rivet nuts that became loose on my Reese Straight Line Distribution Hitch. These appear to be the exact same rivet nuts that came with the hitch. I apparently did not tighten the original ones as I should have
but did not realize my error until I replaced with the new ones. New ones tightened to specified torque with no problem.
by: Dan D.10/10/2014
Just 48 hours before leaving on an extended trip I found a problem with my trailer hitch. After consulting with the manufacture I searched several local supply houses, home improvement stores, and auto parts stores. One call to etrailer around 10 AM on Thursday and the parts were overnighted to me and installed by 11AM Friday.
Thanks etrailer for saving our trip!
by: BOB G08/20/2015
NEEDED RIVET NUTS TO INSTALL REESE SWAY CAM ARM ON OUR NEW TRAILER.
ETRAILER HAD THEM IN STOCK.PLACED ORDER.ORDER ARRIVED IN THREE DAY AND COMPLETED THE INSTALL.
GREAT PRODUCT INFORMATION AND SUPPORT FROM STAFF.
by: Earl Sharpe10/11/2016
Good product. Fast delivery.
Just do not use a Step Drill bit to do the drilling. I stopped at the proper size and have 2 of the Rivets spinning around in the frame. Luckily one on each side.
You have to leave some of the burred metal to grab the rivets and remember to use thread lock on the self taping nuts as well.
by: Ken M.01/13/2015
I'm always amazed at the excellent packaging the folks at etrailer ship their products in. The trailer hitch I ordered was delivered fast. The hitch and rivet nuts look excellent! Thanks for the instructions.
by: Amy H12/11/2015
Fastest service ever! Ordered these at midnight Wednesday, overnight shipping (we are leaving for a trip & were in an emergency situation!) they were on my doorstep before noon on Friday. eTrailer, you seriously rock. Great products, service & everything else every time I deal with you.
The Riv Nut on our Reece hitch had come halfway out of its hole in our frame, and we needed a new one. Nobody in town had them. Looks like fine quality product. Installation was a breeze.
by: Jeff05/31/2019
Great service - received rivet nuts quickly to remount my Reese Dual Cam hitch on my trailer/camper.
by: Barney J04/27/2020
Worked as needed to mount lift brackets for weight distribution system.
by: Mike03/31/2017
Just what I needed to transfer my Reese Street line hitch to my new trailer
by: Scott P04/27/2017
Once again Etrailer comes through again. Bought a new travel trailer and neglected to think about the dual cam set up on it. Well I ordered the rivets a week before we needed to use the camper and I had them 2 days later. Install was simple and painless great product from a great vendor.
by: Tommy 09/18/2020
Product works as advertised. Used it to relocate my weight destruction hitch cams. Shipped fast and good price. Etrailer always has what I need for my Rv.
25
62
Show More Reviews
See what our Experts say about this Reese Accessories and Parts
- Reese Dual-Cam Sway Control Brackets are Coming Loose from the Trailer FrameIt sounds like you need the rivet nuts # RP58507. If the rivet nuts do not work then you can go ahead and drill all the way through the frame and use longer bolts to bolt the dual-cam brackets to the trailer. Also make sure that the set screws at the backs of the brackets are at the proper tension. As far as the tension goes you may need to make adjustments to the head angle and/or the amount of chain links you are using at the spring bars to make it easier to use.
view full answer... - Replacement 1/2 Inch by 1-1/2 Inch Bolt for Reese Dual Cam BracketIt sounds like you want the bolts that fit those rivet nuts # RP58507. They are the Replacement Thread Forming Screw 1/2" - 13 # 58437 or the Replacement Thread Forming Screw 1/2" -13 for Snap Up Brackets # 58459 for a quantity of 2.
view full answer... - Proper Sway Control Bracket Position and Attachment for Reese Strait-Line WDHThe distance from the center of the coupler to the center of the sway control arm should be 19-3/8" for overslung couplers which you can see in the photo attached below. In regards to the sway control cam bracket, the hole size is indeed 11/16". It's possible the rivet nuts are undersized but in all honestly, incorrectly drilling out the holes is much more likely but we do offer replacement rivet nuts part # RP58507 to confirm. If you can find a way into the frame to bolt the brackets on...
view full answer...
- Bolts that Attach to Reese Dual Cam Rivet Nuts # RP58507For a quantity of 8 of the bolts that attach to the rivet nuts # RP58507 we have the part # 58437 or for just two we have the part # 58459.
view full answer... - Help Getting Bolt out of Rivet Nut of Reese Dual Cam Sway ControlSounds like one of the Rivet Nuts part # RP58507 of your Dual Cam Setup part # RP26002 is turning instead of allowing the bolt to come out. You might try tightening down the other bolts again to see if the bracket putting more pressure on the top of the rivet would hold it in place well enough for it to thread out.
view full answer... - Correct Size Bolts for Installing Reese Dual Cam Brackets to Trailer FrameThe bolts that secure to the Rivet Nuts for Reese Dual Cam High Performance Weight Distribution # RP58507 aren't available from Reese as a replacement part but you should be able to find them fairly easily at your local hardware or home improvement store. You just need 4 of the 1/2"-13 X 1-1/2” Grade 5 Bolt and you'll be set.
view full answer... - Are Thread Forming Screws 58437 For Reese Dual Cam Sway Control RP26002 Reuseable?I reached out to my contact at Reese and you are correct that you will need new rivet nuts # RP58507 to install your Reese Dual Cam Weight Sway Control # RP26002 on your new trailer. He mentioned that the replacement thread forming screws # 58437 can be reused as long as they are still in good shape, but you should use some thread locker like # LT37643 to keep them from backing out. If the screws are not in the best of shape then you will need to replace them with the # 58437. I included...
view full answer... - Why Do Thread Forming Bolts for Reese Dual Cam Require Rivet NutsI agree that calling the # 58437 thread forming is a little misleading since it's recommended that you drill holes in the frame and use the rivet nuts part # RP58507. Thread forming bolts typically have more of a drill bit on the end of the bolt than what the # 58437 have.
view full answer... - Replacement Screws Needed to Install Dual Cams on the Reese Strait-LineThe Replacement Thread Forming Screw # 58459 that you referenced is what is used to hold the cams for a Weight Distribution (WD) system like the Reese Strait-Line # RP66084 . If you need more than 2 and you would like some spare parts you could go with part # 58437 instead which has 8 of them. These screws install on your trailer frame with the Rivet Nuts for Reese Dual Cam High Performance Weight Distribution # RP58507. They are not self-tapping. You can see this process done starting...
view full answer... - Replacement Screws for Right Frame Bracket for Reese Dual Cam HP Sway ControlWe do have the replacement screws for the Right Frame Bracket for Reese Dual Cam HP Sway Control, part # 58462. For a set of two, you can get part # 58459. For a set of 8, you can get part # 58437. You may also need the Rivet Nuts, part # RP58507, to complete your installation. I've linked to video reviews for each of these parts.
view full answer... - What if Rivet Nuts of Reese Dual Cam Weight Distribution SpinIf you follow the install instructions like I attached on this page for the rivet nuts part # RP58507 there are steps listed for if the rivet nut is loose enough to spin. So what I would do is follow the install instructions carefully at that link and see if you are able get it to fit like you need it to.
view full answer... - Reese Weight Distribution Dual Cam Brackets Dislodged from Trailer FrameThank you for your photo of your Reese Dual Cam Weight Distribution system's cam mount. I spoke to my technical contact at Reese about the issue you had with the hardware and dual cam brackets coming out of their mounting positions on your trailer frame and he suggest you use the Reese Rivet Nuts # RP58507 to re-install your cam brackets. These rivet nuts will require you to enlarge the existing holes in the trailer frame to 11/16-inch to accept the rivet nuts. Please refer to the linked...
view full answer...
- Should Rivet Nuts Or Thread Forming Screws Be Used When Installing Dual-Cam Sway Control The Rivet Nuts for Reese Dual Cam High Performance Weight Distribution, part # RP58507, are included with a dual-cam system like part # RP26002. You can check out the installation instructions that are attached for the # RP26002 and see how these are installed. The thread forming screws are used on a tubular style frame attachment, and are not used on a standard trailer frame.
view full answer... - Availability of Rivet Nuts for Installing a Reese Dual Cam Weight Distribution SystemYes, we have the part you are needing. Part # RP58507 are Rivet Nuts for Reese Dual Cam High Performance Weight Distribution are available in a quantity of 4.
view full answer... - Replacement Rivet Nuts for Reese Dual Cam HitchAccording to Reese, it is perfectly acceptable to use their # RP58507 rivet nuts to fasten the dual cam bracket to the trailer frame. Reese developed the rivet nuts because they found that over time, it was possible for the attachment holes in the tube frame to elongate.
view full answer... - Mounting Brackets For Sway Control Arms on Reese Dual Cam High Sway Control # RP26002On the Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames # RP26002 that you have referenced in your question, the black steel mounting brackets that bolt to the trailer frame are available separately. These brackets allow you to attach the sway control cam arms to the trailer frame. That do come in left side and right side configuration. The Replacement Right Frame Bracket for Reese Dual Cam HP Sway Control # 58462 is for the right side of the trailer. The Replacement...
view full answer... - Reese Dual-Cam Sway Control Fell Off of TrailerSometimes this situation can occur and the first thing to try that will likely work is a set of rivet nuts # RP58507. With these rivet nuts you should not have to drill all the way through the trailer frame. I have included a link to the installation instructions for you.
view full answer... - Will the Strait-Line Weight Distribution System Work With Aluminum FrameThe Strait-Line Weight Distribution Systems like part # RP66082 require drilling into the frame and then using hardware which could react with an aluminum frame so this is not the best option. I would instead recommend a bolt-on system like the Curt TruTrack Weight Distribution System part # C17500. There is no drilling into the frame and any part in contact will have a coating so the chance for galvanic corrosion is low.
view full answer... - Replacement Trailer Mounting Hardware for Reese Straitline Weight DistributionFor replacement chain hangers for the Reese Strait Line part # RP66084 you'd want the # 58392. You may have left the rivet nuts in your previous trailer for the dual cams to mount to the frame which for those you'd need the part # RP58507. I can't think of any other hardware you may have left on the old trailer but let me know if there's something else you need.
view full answer... - Replacement Mounting Bolts and Rivets Recommendation Reese Dual Cam Sway ControlIt sounds like you need the thread forming screws that attach the dual-cam sway control brackets to the trailer frame. Is this is correct then you will need set # 58437 for 8 or # 58459 for 2. You also need the rivet nuts, # RP58507, for a set of 4.
view full answer... - Replacement Mounting Bolts for Reese Dual-Cam Sway ControlIt sounds like you need the thread forming screws that attach the dual-cam sway control brackets to the trailer frame. Is this is correct then you will need set # 58437 for 8 or # 58459 for 2. You may also need the rivet nuts, # RP58507, for a set of 4. If you need a different part then I have linked the dual-cam instructions # RP26002 that shows the parts list on the first page.
view full answer... - Does the Strait-Line Weight Distribution System Use Rivet Nuts or Self Threading ScrewsThe most up to date instructions that I have for the Strait-Line Weight Distribution System (Rev. T 2017) show bolts and rivet nuts being used to secure the sway brackets to the frame although our photos may not reflect this change. Therefore, the kits we offer such as part # RP66084 will come with the bolts and rivet nuts as opposed to the previously used thread forming screws. The bolts can be obtained locally but we do offer the rivet nuts as part # RP58507. The thread forming screws...
view full answer... - Do Strait Line Rivet Nuts Have Trailer Frame Width RestrictionsThe Rivet Nuts for Reese Dual Cam High Performance Weight Distribution # RP58507 don't have a frame width range listed for what they fit. Basically the frame width of any trailer that is rated for weight distribution would be totally fine
view full answer... - Rivet Nuts Coming Loose on Reese Strait-Line Weight Distribution SystemDrilling out the rivet nuts # RP58507 could actually cause the holes they are in to enlarge which would allow them to come out of their respective holes easier. If that does happen then the only solution would be to use a bolt and nut and run the bolt all the way through the trailer frame. Another option is to use some blue Loctite # LT37643 which will prevent the bolts from backing out and still allow you to remove the bolts using hand tools should the need arise.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Michael
11/23/2023
Very Happy with the Reese Weight Distributing anti-Sway Hitch is still doing a GREAT Job. I fisrt installed it on a 35 Solaire Camper and now have it on a SportTek 39 Camper. Still doing a Great Job.