Using a Weight Distribution Hitch With V-Nose Toy Hauler Trailer
Question:
Will this Equilizer hitch work on a V-Nose enclosed toy hauler trailer?
asked by: Jim
Expert Reply:
In order to use a weight distribution hitch with your v-nose trailer, you are going to need to use chain hangers # RP58305 to bolt onto the sides of your trailer frame and a system such as the Reese Strait-Line # RP66084. In order to choose the best weight distribution system, you will first need to know your total tongue weight (TTW), which is the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow vehicle.
To determine your trailer's loaded tongue weight you can use a scale such as the etrailer # e99044 or by using one of the methods outlined in the help article on determining tongue weight I've linked for you. From there, simply add on the weight of the cargo behind the rear axle of your vehicle and you'll have your TTW. The ideal system would be one in which your TTW would fall somewhere in the middle of the weight distribution system's tongue weight capacity. I've added a link to our page with each of our weight distribution systems for you to come back to once you determine your TTW.
Products Referenced in This Question
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Chain Hangers for Reese Weight Distribution Systems - Bolt On
- Accessories and Parts
- Weight Distribution Hitch
- Chain Hangers
- Reese
more information >
Strait-Line Weight Distribution System w/ Sway Control - Trunnion Bar - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 800 lbs
- 900 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: Replacement Clearance Lights Needed for GLO-BRITE 122R and 122Y Lights
- Q&A: Converting From 7-Way Round to 7-Way Flat Connector
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Article: Determining Trailer Tongue Weight
- Q&A: Is There an Axle Flip Kit For The 2023 Northern Spirit 2145RBX Travel Trailer?
- Q&A: LED Trailer Taillight Recommendation for a 3110 Feather Lite Car Trailer
- Article: 2023 Holiday Must Haves
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Recommended Trailer Wiring Harness For 2020 Ford Edge Titanium
- Article: How to Measure for Trailer Hitch Drop
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited