Replacing the Winches on a Sea-Doo Trailer
Question:
Im rebuilding my seadoo trailer and need a winch/strap/hook qty 2 that will fit in a welded bracket like shown on the picture. I thought the DL16001 might work - showing out of stock until 10/11. Any help would be great!!
asked by: Brian T
Expert Reply:
When replacing a winch, or winches, on a boat trailer, I always recommend one that ratchets. This way if you every loose grip, you will not need to start all over after the boat or jet ski slides back into the water.
So with that being said, the TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs # 348776 will be the option I suggest. This is rated up to 1,500 pounds and will use the standard bolt pattern that most winches follow. However, with the way your current winches are welded on, it is going to cause some difficulties.
It looks like the whole winch is welded onto that beam, so you are most likely going to need to cut off the old winches and either bolt or weld on a new plate to attach new winches. You may be able to use something like the # DL24059 or # DL24110 as replacement brackets, but again, modification will be needed.
Products Referenced in This Question
TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- Standard Hand Crank
- TowSmart
more information >
Dutton-Lainson Angle Mounting Plate for StrongArm Electric Winches
- Accessories and Parts
- Electric Winch
- Mounting Hardware
- Plates
- Dutton-Lainson
more information >
Universal Hand Winch Right Angle Mounting Bracket for Hand Winches by Dutton-Lainson
- Accessories and Parts
- Trailer Winch
- Mounting Hardware
- Brackets
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Buyers Products Trailer Hand Winch - 800 lbs
- Trailer Winch
- Standard Hand Winch
- Boat Trailer Winch
- Utility Winch
- Light Duty
- Standard Hand Crank
- Nylon Strap
- Buyers Products
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Shop: TowSmart Trailer Winch - Single Speed - Ratcheting - 20' Strap - 1,500 lbs
- Shop: Kenda 4.80/4.00-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Shop: Buyers Products Trailer Hand Winch - 800 lbs
- Shop: Yates Spool Roller for Boat Trailers - Heavy-Duty Rubber - 4" Long - 1/2" Shaft
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: CE Smith Spare Tire Mount for Trailers - Steel - 4- and 5-Lug Wheels - 8-3/8" Long
- Shop: etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1,000 lbs
- Q&A: Recommended Hand Winch for 2200 lb Boat
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: What is the Difference Between 4.80-12 and 5.30-12 Sized Tires
- Q&A: Is there a 12 Inch Trailer Tire that is Rated for 80 Miles Per Hour
- Video: Review of TowSmart Trailer Winch - Standard Hand Winch - 348776
- Video: Stallion Camper Jack - Stabilizer Jack - 288-01892-2 Review
- Video: etrailer Camper Jack - Stabilizer Jack - TJ01RT-HD Review
- Video: CE Smith Boat Trailer Carpeted Bunk Boards Review
- Search Results: 2 inch coupler
- Search Results: safety chains
- Q&A: Could Stallion Stabilizer Jacks # 288-01892-2 Install towards Center of Trailer Frame
- Q&A: Could Bump In Road Cause Drop Leg to Fall on Stallion Stabilizer Jacks
- Q&A: Comparing Stallion and etrailer.com Drop Leg Stabilizer Jacks for Trailer
- Q&A: How To Install the Stallion Stabilizer Jacks On An Aluminium Frame Trailer
- Search Results: trim
- Search Results: hinges
- Search Results: hitch lock
- Search Results: piano hinge
- Video: Dutton-Lainson Trailer Winch DL24110 Review
- Video: Fulton Trailer Winch - Standard Hand Winch - F142201 Review
- Video: Optronics Trailer Lights - Tail Lights - TLL9RK Review
- Search Results: standard hand winch