Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts
(16 reviews)
Price: $112.71
In Stock
Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts
Item # TK71-755-00
Retail:$172.99
Our Price: $112.71
You Save: $60.28
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (16)
- Q & A (0)
- Videos (2)
- Photos
Dexter Accessories and Parts - TK71-755-00
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Solenoid Valve
- Valve
- Dexter
Use this kit to replace the solenoid valve in your Dexter brake actuator (T4839100, T4500600, T4839120, or T4839000). Kit includes solenoid valve, cable ties, and draining tube.
Features:
- Replaces the solenoid valve in your Titan/UFP brake actuator (T4839100, T4500600, T4839120, or T4839000)
- Backup valve installs to prevent trailer brakes from locking up when moving in reverse
- Includes:
- 1 Solenoid valve
- 2 Cable ties
- 1 Drain tube
- Made in the USA
K71-755-00 Dexter Axle Reverse Solonoid Valve Replacement Kit for Brake Actuators
Replaces Titan/UFP Reverse Solonoid Valve Replacement Kit for Brake Actuators
Video of Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Titan Brake Actuator Replacement Solenoid Valve - TK71-755-00
Michael: Hi there. I'm Michael with etrailer.com. Today, we're going to take a quick look at the cylinoid valve replacement kit. This is going to replace the cylinoid valve for your Titan and UFP brake actuators. It's going to be a direct replacement for the part numbers that you see on the screen there. So if you have any of those parts, you can trust that this is going to be the exact piece that you need.Basically, what this backup valve does, is it installs to help prevent the trailer brakes from locking up when you're moving in reverse so that you can still use the trailer.
So it's going to come with the one cylinoid valve, two of these tie cables, to help get your wiring up and out of the way, and one drain tube. This is a nice quality cylinoid. I think it's going to do a good job for you. Allow you to keep your trailer going, even in reverse. And product is made here in the USA, so you can trust that it's made to the high quality standards that we've come to know and trust for products made here in the US.
I think this is going to be a great option for you. Especially if you have any of those part numbers, you can rest assured that this piece is going to get you back up and operational again. So that's going to complete our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Solenoid Valve Replacement Kit for Dexter Brake Actuators with Reverse Lockouts - TK71-755-00
Average Customer Rating: 4.8 out of 5 stars (16 Customer Reviews)
Use this kit to replace the solenoid valve in your Dexter brake actuator (T4839100, T4500600, T4839120, or T4839000). Kit includes solenoid valve, cable ties, and draining tube.by: Joe03/02/2024
Shipping a little slow
by: CB11/10/2021
Worked great, Perfect replacement for a Shor'lander tandem trailer circa 2007.
by: Kevin08/25/2019
Got tired of getting out to manually lock out the trailer brakes to back up. After a bit of troubleshooting, I discovered the solenoid wasn't functioning. This solenoid was a direct replacement and the install went very well. As long as the 5-pin is connected to the truck, backing up is no issue now. If your trailer brakes lock up in reverse, the solenoid may be just what you need. The coil on mine was OK, but the valve itself wouldn't operate. The replacement came with the solenoid, bypass tube, and zip ties to secure the bypass tube. The only thing lacking to make it a complete package is a heat shrink wire crimp to splice the wire to the original.
by: Edward12/21/2020
I needed the fitting to tie the rubber hose to master cylinder the picture showed the fitting on the master cylinder
by: John05/31/2019
Exact replacement, quick shipping and delivery, very satisfied
by: Norman 11/05/2021
Hard to find part but E trailer has it.
by: Daniel 09/15/2022
Fit and functioned perfect over factory 1 wire unit (no separate ground on original)
by: Kevin 07/22/2020
Item ordered was received on time in good condition and works as described. All good.
by: Paul L05/07/2020
Right part for a good price
by: Gary 04/13/2021
Part was as described. Great service.
by: Bill 04/02/2024
by: David 09/25/2022
by: Alan 08/10/2022
by: Gary 04/21/2023
by: Chris 07/12/2021
16
16
See what our Experts say about this Dexter Accessories and Parts
- Reverse Solenoid for Brake Buddy 32220We have the Brake Buddy 32220 reverse solenoid available with the Solenoid Valve Replacement Kit for Titan/UFP Brake Actuators with Reverse Lockouts item # TK71-755-00. I have included a link to this part and also a couple installation and review videos for you.
view full answer... - Replacing Trailer Actuator Buddy 32220 Reverse Solenoid on Triton Bass Boat Trailer The replacement reverse lock out you are looking for is the part # TK71-755-00. This would allow you to use the same adapters and fittings you have now.
view full answer...
- Solution for Needing Longer Hose than What Comes with Dexter Lockout SolenoidHey Cory, so we don't have a longer version of the hose that comes with the lockout solenoid part # TK71-755-00 that you referenced but it's basically a brake hose so what I would do is take the hose with you to a car parts store and have them match the size but in the length that you need.
view full answer... - Troubleshooting Trailer Brake Wiring on Coupler Solenoid For Backing UpIt is not wired correctly. The wires coming out your coupler are for the reverse lockout solenoid. The wire connected to ground is correct, but the wire connected to brakes at your junction box # HS381-9000 is not correct. That pin is for electric trailer brakes and not a hydraulic surge brake coupler. You will want to connect that coupler wire to the reverse light circuit instead. This is designed to give power to that solenoid when you shift into reverse allowing that solenoid like...
view full answer... - Troubleshooting Reverse Lockout Solenoid Replacement on 2006 Mastercraft TrailerThanks for the explanation. The Solenoid Valve Replacement Kit for Titan/UFP Brake Actuators with Reverse Lockouts # TK71-755-00 is what you can use for that style coupler. It simply has another connection for a drain to give you the bypass. Since your current one has this, you can simply remove the wiring and leave it in place with the Titan # T4748800 you have behind it. Simply connect the wires to that unit and you should be good to go. If you prefer to remove the old one you can...
view full answer... - Replacing Trailer Buddy 32220 Reverse Solenoid on Ranger Boat Trailer We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit # TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described (see attached images). You will be able to use this with your existing mounting bracket without issue. I have included a short video review below that you can check out as well.
view full answer...
- If Surge Brake Actuator is Removed Will Trailer Brakes Still ActivateIf you were to remove the surge brake actuator from your trailer then there wouldn't be any pressure to your hydraulic brakes which means your brakes simply won't activate at all. I recommend installing a reverse lockout solenoid like the Titan # TK71-755-00 or the Demco # DM5404 because it ties in to the reverse light function on your tow vehicle and essentially prevents your actuator from applying pressure to your hydraulic brakes. Keep in mind that you'll need to install a 5-Way flat...
view full answer... - Correct Solenoid Valve for Demco DA10 ActuatorThe Solenoid Valve Replacement Kit for Titan/UFP Brake Actuators with Reverse Lockouts # TK71-755-00 only has a single wire, not for ground, and the issue may be that you do not have the correct replacement solenoid valve. I say that because you mentioned having a DA10, which is a Demco actuator, and for which the correct replacement is the Replacement Bypass Solenoid Valve for Demco Brake Actuators # DM05561. This does have the two wires - one for your reverse wire and the other for...
view full answer... - What Is The White Wire On The Reverse Solenoid # TK71-755-00 Used For? The white wire on the Reverse Solenoid # TK71-755-00 is the ground wire. Your solenoid likely grounded itself through the installation hardware. Most aftermarket solenoids now have 2 wires as many manufacturers switched to using plastic for the master cylinders to resist corrosion.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Jacob T
Installed by:
Cole B
Installed by:
Michael B
Updated by:
Wilson B
Updated by:
Manda E
Written by:
Alexander C
Test Fit:
Shane H
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Cb
11/11/2022
Still working fine after a year.