Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
(16 reviews)
Price: $328.29
In Stock
Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
Item # DX97FR
Our Price: $328.29
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (16)
- Q & A (0)
- Videos (1)
- Photos
Dexter Accessories and Parts - DX97FR
- Brake Actuator
- Hydraulic Drum Brakes
- Inner Member
- Dexter
This replacement inner member slide fits into the existing outer member housing of your Dexter DX7.5L and Legacy UFP surge brake actuator. For use with hydraulic drum brakes.
Features:
- Replacement inner member slide for Dexter DX7.5L and Legacy UFP brake actuator
- Application: hydraulic drum brakes
- Ball size: 2"
- Capacity: 7,500 lbs
- Manual lockout kit sold separately
099-060-00 Replacement Inner Member for Dexter DX7.5L and Legacy UFP Brake Actuator - Drum - 2" Ball - 7,500 lbs
Video of Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Dexter Axle Replacement Inner Member - DX97FR
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Dexter replacement inner member slide. This is going to replace the inner member slide for your Dexter DX7.5L and Legacy UFP brake actuator. This is going to work with your hydraulic drum brakes to apply the brakes with that forward movement. We pull out the pin here. You can see how this is gonna work.
We'll push in on that front portion, and that will allow us to release the ball. It's gonna work with your two-inch hitch ball. And then as you close that there, it's going to snap in place and make sure that it's gonna have a nice snug fit on your hitch ball and then you can pass that pin through again there. This does have a capacity of 7,500 pounds. The manual lockout kit is sold separately.
And so if you are needing to replace that original inner member slide this is going to work for you. And because this is a Dexter product, you can trust it is gonna fit right in place. You're not gonna have to worry about compatibility issues and that sort of thing. So that's gonna complete our look for today. Again I'm Michael with etraler.com.
Thanks for watching..
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
Customer Reviews
Replacement Inner Member for Dexter DX7.5L Brake Actuator - Drum - 2" Ball - 7,500 lbs - DX97FR
Average Customer Rating: 5.0 out of 5 stars (16 Customer Reviews)
This replacement inner member slide fits into the existing outer member housing of your Dexter DX7.5L and Legacy UFP surge brake actuator. For use with hydraulic drum brakes.by: Dan 10/29/2023
Part came fast, heavy duty,good quality.
by: Al B.06/26/2023
Good product, well made.
by: Norman 08/08/2021
Brake Actuator arrived on time, it was very easy to install. currently watching the videos that etrailer.com has on line to bleed the actuator and brake system. Plan on ordering from them again.
by: Terry 11/09/2021
Fit in just like the original one. No messing around with changing the master cylinder. I also added a reverse lock out valve to the back of it, so I don't have to get out to put in the "reverse pin" to back up.
by: Chris 09/25/2020
Part was ordered, Tracking info is great . Recieved it on time and is exactly the correct fit
by: Tony 01/07/2022
I received great customer service over the phone and the product was shipped fast in this day and age it was amazing
by: Eric 01/25/2024
by: Donald 09/20/2021
Everything was great and it fits perfect !!!
by: Gene01/20/2023
by: Phillip 06/25/2023
by: Dan 08/23/2022
by: Wayne 12/06/2023
by: David 01/13/2021
by: John 01/04/2022
by: Anthony 06/13/2021
by: Michael 08/05/2021
16
16
See what our Experts say about this Dexter Accessories and Parts
- Replacement Inner Member for UFP Model A-75 ActuatorFor a UFP model A-75 drum actuator we have the replacement inner member part # DX97FR that is a fit for the Legacy UFP actuators which includes what you have.
view full answer... - Correct Replacement Inner Slide for UFP A-70 Surge Brake ActuatorThe Replacement Inner Member for Dexter DX7.5L Brake Actuator part # DX97FR is compatible with a UFP A-70 Surge Brake Actuator.
view full answer... - Replacement Inner Member for UFP A-60 Actuator 34039What you have is a UFP A-60 drum brake actuator Philip so to replace just the inner member what you would need is the part # DX97FR and you'd be set.
view full answer... - Is There a Diagram For The Coupler Mechanism Spring For The Dexter DX7.5L A-60 Brake Actuator # DX33Sorry Richard, the best I can find is an image of the Inner Member # DX97FR for the Dexter DX7.5L A-60 Brake Actuator # DX33FR lower coupler mechanism spring.
view full answer... - Is The Outer Shell Of The Dexter A-60 Surge Coupler Available Separately? The outer shell for the Dexter DX7.5L A-60 Brake Actuator # DX33FR is only available with the entire actuator. They do offer the Replacement Inner Member # DX97FR for this particular actuator since those parts are more likely to wear and become damaged than the outer shell.
view full answer... - Replacement Inner Member For A-60 Surge Brake Actuator For Drum BrakesIt sounds like you are looking for the Replacement Inner Member # DX97FR. This is for drum brakes and does not have a reverse solenoid like the Inner Member # DX99FR you found.
view full answer... - Replacement Inner Member for UFP A-60 Drum Brake ActuatorThanks so much for the photo, which shows you have a UFP A-60 actuator, which is the same as the Dexter DX7.5L A-60 Brake Actuator - Drum # DX33FR. I can confirm that the correct replacement inner member for both actuators is the Replacement Inner Member # DX97FR.
view full answer...
- Replacement Inner Members For UFP A-60 Brake Actuator On Tandem Axle TrailerYou will need either the Replacement Inner Member # DX97FR for tandem axle drum brakes or the # DX99FR for a tandem axle with disc brakes. The capacity was increased on the A-60 from 6,000lbs to 7,500lbs which is why you see the higher rating on the inner members.
view full answer... - Replacement Inner Member for 2004 Nitro Bass Boat Brake ActuatorThanks for the picture and your patience! I did some research and made some phone calls, the correct replacement for your actuator is the Replacement Inner Member for Dexter DX7.5L Actuator - Single Axle w/ Disc - 2" Ball - 7,500 lbs item # DX39FR.
view full answer...
- Does the Dexter DX27FR Use the Same Inner Member as the DX83FRYes, you can use the inner member from the # DX27FR and the # DX83FR interchangeably. Although they are designed to fit different trailer tongue sizes, they both use the same inner member # DX97FR. You could either purchase the inner member separately or if you want an extra/new housing the # DX27FR fits a 3" x 4" straight tongue and the # DX83FR fits a 3" x 5" straight tongue.
view full answer... - Can Dexter Drum Actuator have Electric Reverse Lock Out Added ItDexter doesn't put reverse lock outs on their drum brake actuators so you'd need to add the part # DM5404 do a new actuator. The part # DX97FR is just the inner section of an actuator though. For the actuator you'd need the part # DX33FR.
view full answer... - Replacement Inner Member/Master Cylinder For Dexter A-60 Drum Brake Surge ActuatorWe do have both the Inner Member # DX97FR and Master Cylinder # TK71-756-00 for your Dexter A-60 drum brake actuator. These both have the aluminum construction you are looking for.
view full answer... - Replacement Surge Brake Actuator For 2009 Ranger Trail Trailer With Tandem AxlesI do see many of the 2009 Ranger Trail trailers allow you to use a replacement Inner Member. You will need to match these with your specific actuator and either Disc # DX99FR or Drum # DX97FR brakes. If you can tell me exactly what model number actuator is on your trailer I can narrow down to the correct actuator. We also have replacements like the Demco Hydraulic Brake Actuator for Disc # DM62VR or Drum # DM72VR brakes. This type of actuator bolts to a 3" wide straight pole tongue.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Written by:
Mike S
Installed by:
Michael B
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.