Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
(20 reviews)
Price: $68.46
In Stock
Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
Item # TK71-758-00
Retail:$121.99
Our Price: $68.46
You Save: 44%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (20)
- Q & A (0)
- Videos (1)
- Photos
Dexter Accessories and Parts - TK71-758-00
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Shocks
- Dexter
Use this kit to replace the shock absorber spring in your Dexter brake actuator (T4839100, T4500600, T4839120, or T4839000). Includes spring, bushing, and installation bolt.
Features:
- Kit provides necessary parts to replace the shock absorber spring in your Titan/UFP brake actuator (T4839100, T4500600, T4839120, or T4839000)
- Shock bushing and bolt included
- Made in the USA
Specs:
- Length:
- Extended: 8" long
- Retracted: 6-1/2" long
- Shock body diameter: 1-1/2"
- Eyelet diameters:
- Larger: 3/4"
- Smaller: 1/2"
K71-758-00 Dexter Axle Shock Absorbing Spring for Brake Actuators
Replaces Titan/UFP Shock Absorbing Spring for Brake Actuators
Video of Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Titan Replacement Shock Absorber Spring Kit Titan UFP Brake Actuator - TK71-758-00
Hi, everybody. Andy here with etrailer.com. And today we're gonna take a brief look at this replacement shock absorber spring kit for the Titan UFP break actuators. This kit is going to replace the spring in your Titan UFP break actuator. And I am including on your screen the model numbers that this is going to work with and this includes everything that you see here on the table before me. You're going to receive this shock absorber spring, the bushing, and the installation bolt.
This is made in the USA. And just some additional information for you to make sure that this is going to fit your application. I am including the length on your screen. The extended length is eight inches long. The retracted length is six and a half inches long.
And then the diameter of the body itself, we are sitting right at an inch and a half, and then the eyelet diameters, this larger one is gonna be three-fourths of an inch. And then this smaller one is gonna be half an inch. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me..
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Alternate product found
Customer Reviews
Replacement Shock Absorber Spring Kit for Dexter Brake Actuators - TK71-758-00
Average Customer Rating: 4.5 out of 5 stars (20 Customer Reviews)
Use this kit to replace the shock absorber spring in your Dexter brake actuator (T4839100, T4500600, T4839120, or T4839000). Includes spring, bushing, and installation bolt.by: John 08/28/2022
Worked great in the tongue of my Skeeter's EZ Loadr trailer. The brakes would apply to quickly before I replaced this part. Work great now.
by: William10/06/2023
although shipping was delayed, etrailer made good by refunding my shipping. part fit perfectly and worked as expected.
by: Benoit Larocque03/19/2020
le cylindre ne retient pas assez il s'enfonce trop facilement lorsqu'ont freine la remorque cogne sur le hitch tout les cout lors du freinage.
[the cylinder does not hold enough it sinks too easily when braked the trailer hits the hitch all costs when braking.]
by: Toby10/03/2022
Haven’t received anything after tracking has said it has been delivered, but hasn’t. Waiting
Katrina B.
10/14/2022
I see that your item was delivered by your local post office. It is possible that this item was placed in the mailbox or had been delivered to your neighbors by mistake. Please confirm whether this has arrived. If so, we would love to hear your feedback of the product.
by: Perfect Fit02/21/2022
The product arrived in just two days. This item was an exact fit. Install was pretty straightforward. I have not had a chance tp road test the trailer yet, but I am confident this will address the clunking when pulling away after a stop.
by: Steven 07/16/2022
Had never used etrailer. Found the part I needed on etrailers web site and ordered with fast delivery. Thanks.
by: J.11/04/2022
Parts as described quick delivery easy Folks do work with
by: Jeff 09/23/2022
Exact fit replacement
by: Brock 09/17/2022
Part came in a orderly time and was a really good price e.
by: Dustin08/17/2023
by: K.C.03/12/2019
Installed
by: Charles 02/27/2024
by: Mike05/11/2022
by: Joseph 09/20/2022
by: Tristan 03/20/2024
by: Claude 03/24/2023
by: Charles 09/04/2022
by: Michal03/02/2021
by: Jim 11/16/2021
by: Dan 08/17/2022
20
20
See what our Experts say about this Dexter Accessories and Parts
- Correct Replacement Master Cylinder and Shock for a Dexter Model A60/A75/XR84 Brake Actuator For a replacement shock you're going to want the Replacement Shock Absorber Spring Kit for Dexter Brake Actuators # TK71-758-00, and for the replacement master cylinder you'll just need the Replacement Master Cylinder Assembly for Dexter Brake Actuators # DX44FR and you'll be all set.
view full answer... - Surge Brake Actuator Repair for Titan Drum Brake Actuating CouplerThanks for the photos. It is clear you have a Titan brake actuator like the Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs # T63FR. It sounds like you need the Replacement Master Cylinder Assembly for Titan/UFP Brake Actuators - Drum Brakes # TK71-756-00 or Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum # T4395100. Based on your photos it also looks like you need the Replacement Roller/Pin/Pad Kit for Titan/UFP...
view full answer...
- Troubleshooting Replacement Shock Absorber Spring TK71-758-00 The Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators # TK71-758-00 is supposed to move slightly, and should be able to move by your own force. To test the shock absorber, it should measure 6-1/2" long when retracted, and 8" long when extended. If you install it and it still makes a loud clunk noise, then it could either be defective, installed incorrectly, or the wrong size chock absorber for your brake actuator.
view full answer... - Replacement Shock for Hydraulic Trailer Brake ActuatorI believe you are referencing a replacement shock for an actuator and from what you described it does sound like you are in need of a new one. The correct one will be a replacement for your actuator, and I'll list the replacements we carry so you can select the correct one: - Replacement Shock for Titan Model 6 and 10 Brake Actuators # T1242600 - Replacement Shock Absorber for Titan Model 60 Brake Actuators # T2336200 - Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators...
view full answer... - Replacement Master Cylinder for Dexter Brake ActuatorJudging from the photo, it does look like the # DX44FR that you were looking at is the correct replacement part you need. This is the replacement master cylinder for the A-60, A-75, A-84, A-160, A-200, XR-84 and XR-200 series of Dexter actuators, in case you know what model you've got. When it comes to the Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators # TK71-758-00 you were looking at, those measurements are as follows: Large hole: 3/4" Small: 1/2" Retracted: 6-1/2" Extended:...
view full answer...
- Dimensions Of Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators TK71-758-00I had our warehouse measure the Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators # TK71-758-00 and the outside diameter of the cylinder measures 1-1/2". You are correct that the # TK71-758-00 has a retracted length of 6-1/2" and an extended length of roughly 8". I included diagrams showing these measurements for you to take a look at.
view full answer...
- Replacement Master Cylinder and Shock for UFP A-60 Trailer ActuatorFor the UFP A-60 we have the replacement shock part # TK71-758-00 and then for a replacement master cylinder we have the part # DX44FR. If you need something else let me know and I'll see if we can get what you'd need.
view full answer... - Replacement Master Cylinder And Shock For UFP A-60 / A-75 / XR-84 Surge Brake ActuatorsThe Replacement Shock Absorber Spring Kit # TK71-758-00 is the correct shock for your UFP Surge Brake Actuator. The picture you included does not specify if it is for a disc or drum brake set, so I have found both for you to choose from. Disc Brake Replacement Master Cylinder Assembly # DX44FR Drum Brake Replacement Master Cylinder Assembly # TK71-756-00
view full answer...
- How to bleed the brakes on a surge brake actuator on boat trailerWhen bleeding the brakes on a surge actuator, such as the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX56FR, you want to start by making sure there is fresh fluid in the reservoir then press a screw driver against the rod in the access hole to pump the brakes. If you don't have an access hole, wrap the safety chains around a pole or board and push the top into the coupler to force the pumping action that way. I attached a detailed write-up page that explains this process, and...
view full answer... - Replacement Master Cylinder and Shock for Dexter A-60 ActuatorThe correct replacement master cylinder for a Dexter A-60 actuator like what you have would be the part # DX44FR. Then for a replacement shock you would need the part # TK71-758-00.
view full answer... - UFP A-60 Trailer Coupler Actuator Shock ReplacementYes, the Titan shock part # TK71-758-00 is the correct replacement for the UFP A-60 you have on your trailer currently.
view full answer...
- Replacement Shock Absorber For UFP A-75 Brake ActuatorI believe you meant UFP A-75 with a Fulton swing-away tongue, and the reason I say that is there isn't a Fulton A75 brake actuator. So if you were indeed referencing a UFP A-75 actuator, we do have the correct replacement shock absorber: - Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators # TK71-758-00 I was able to verify with the manufacturer that the # TK71-758-00 is indeed the correct replacement for the UFP A-75.
view full answer... - Troubleshooting UFP Surge Brake Coupler OperationThe electric lockout doesn't do anything to the actuator itself, it is a solenoid that doesn't let the fluid pressurize to case the wheel cylinder or brake caliper to engage. The coupler not returning to the forward location has more to do with the Replacement Shock Absorber Spring Kit for Titan/UFP Brake Actuators # TK71-758-00. If you want to use the manual key, it won't be an issue.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Updated by:
Wilson B
Updated by:
Manda E
Written by:
Alexander C
Installed by:
Andy C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
8/29/2023
Still going strong a year later!