Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
(167 reviews)
Price: $71.46
In Stock
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
Item # 40715
Retail:$129.49
Our Price: $71.46
You Save: 45%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (167)
- Q & A (0)
- Photos
Demco Accessories and Parts - 40715
- Trailer Brakes
- Hydraulic Drum Brakes
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Demco
- RH
- 3500 lbs
- Free Backing
Free-backing, passenger's-side trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Galvanized steel resists rust, making the assembly great for boat trailers. Mounting flange has 4-bolt pattern.
Features:
- Marine-grade hydraulic drum brake assembly is great for boat trailers
- Designed for use with surge-type trailer brake actuators
- Sturdy, corrosion-resistant steel construction
- Galvanized backing plate
- Stainless steel spring hardware
- Zinc-plated wheel cylinder
- Free-backing design lets you back up without engaging the trailer brake, even if the actuator is activated
- Riveted, fall-away brake shoe only anchors on drum when brakes are engaged as trailer is moving forward
- Periodic manual adjustment required
- Mounting bolts sold separately
- Made in the USA
Specs:
- Configuration: right hand (passenger's side)
- Dimensions: 10" diameter x 2-1/4" thick
- Mounting flange bolt pattern: 4 on 4"
- Measurement between center of mounting hole to center of mounting hole: 2-3/4"
- Diagonal measurement bewteen mounting holes: 4"
- Wheel size: 13" - 15"
- Axle rating: up to 3,500 lbs
- 1-Year warranty
Note: Because free-backing brakes are designed to eliminate nearly all friction between the brake shoes and the drum when you are driving in reverse, a trailer breakaway kit will not be effective should your trailer disconnect from your tow vehicle while you are backing up.
Free-backing brakes let your trailer move in reverse without the brakes being activated by your surge actuator. These brakes are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse.
Demco Free-Backing Brake with Fall-Away Shoe
This Demco free-backing brake assembly has a fall-away shoe that is designed to provide full braking action when your trailer is moving forward and to supply only limited friction when the trailer is moving in reverse. This is largely due to the incorporated dual springs at the shoe's pivot point. (One spring sits on either side of the shoe lever, so only a single spring is visible when looking at the brake assembly.)
When your rig is moving forward and you engage the trailer brakes, the fall-away shoe expands normally, with the leading edge of the shoe catching the drum. This occurs because the plunger on the hydraulic cylinder pushes on the shoe lever, forcing the leading edge of the brake shoe into the drum. Once that edge catches, the dual springs at the shoe's pivot point facilitate braking by forcing the rest of the shoe to pivot into the drum. The action of the shoe against the drum provides the friction required for braking.
When you are driving in reverse, however, the hydraulic cylinder and the springs work against one another. Even though the plunger pushes on the shoe lever, the dual springs of the fall-away shoe overcome the pressure from the brake cylinder, keeping the leading edge from catching on the drum and ensuring that the shoe does not fully pivot into the drum. Because the shoe makes only slight contact with the drum, just enough friction is generated so that only a minimal amount of braking occurs when you are in reverse.
SB40715M Demco Galvanized 10" Marine Trailer Brake Assembly - Freebacking - Right Hand
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- etrailer mistake
Customer Reviews
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs - 40715
Average Customer Rating: 4.8 out of 5 stars (167 Customer Reviews)
Free-backing, passenger's-side trailer brake assembly won't engage when you reverse, even if your hydraulic actuator is activated. Galvanized steel resists rust, making the assembly great for boat trailers. Mounting flange has 4-bolt pattern.by: Ken06/10/2022
The right and left brake assemblies for my boat trailer arrived quickly and in good shape. The instructional video helped ensure my bolts were oriented properly to allow the brake cylinder to move and it was a relatively easy swap once I got the rusted old assembly removed.
by: Chris08/14/2023
Product is fine, but customer service (pre-sales) and shipping times are so far gone from e-trailer of years past. Site indicated two day delivery, seven days later the item was received - but not complete. Still waiting for another part of the same order.
Katrina D.
8/17/2023
It says in our system that both of these orders have arrived on the 14th and the 15th. Can you please confirm whether you have actually received them both?
Chris D.
8/29/2023
Yes, I received them. Is two day shipping no longer a thing? I don't recall an order taking so long to process pre-shipping.
Katrina D.
8/29/2023
Yes, two-day shipping is still a thing, depending on the time of day that the order is placed and what shipping method is used. It looks like all of your orders have shipped via Free Shipping and seems that some of them shipped via US Mail. I would highly recommend using expedited shipping if you are needing something by a specific time.
by: Excellent04/09/2016
Great company to deal with. Impressive and Professional. Very reasonable in pricing.
Products purchased; trailer Drum and hydraulic surge brakes. Fitted and Work's perfectly. Sad to see everything is made in China.
by: William11/25/2018
Item is as advertised. It was quicker easier and cheaper to replace the whole backing plate assembly. If I had replaced brake shoes, wheel cylinder, and spring kit I would have spent more money & time. I will use etrailer for all of my trailer needs. etrailer even upgraded my shipping at no extra charge. Thank you for the great service.
by: John07/09/2016
The brakes on my 30-year-old boat trailer locked up and would not release. I purchased a set of these Demco brake drum assemblies and installed them myself. It was my first attempt at repairing a hydraulic surge brake system. Before beginning the remove and replace process I watched a “how to video” on the etrailer website. Everything went well, the system now functions as required.
Over the years I have purchased a lot of product from etrailer. I have received excellent product and service everytime.
John
7/9/2017
After one year the complete brake system is working perfectly.
by: Ron C07/26/2016
I have a 1996 E Z Loader Boat trailer that needed a brake job. Couldn't get any satisfaction calling around to find parts until I found the etrailer web site. Everything I needed was laid out easy to find and the prices were fantastic. I compared buying one bearing seal at an auto parts store and found I could do the bearing, race and seal for less on etrailer. They shipped everything as I had ordered and they actually arrived earlier than expected. My mechanic said it was one of the easiest brake job that he ever had to do due to the fact everything was preassembled. I have passed this site on to all my Bass fishing buddies.
Ron C.
7/26/2017
Best bang for your buck. Have not had one issue with my new trailer brakes. Hope these last another ten years as I know the trailer wont.
by: Steve S.03/14/2016
These brake parts were easy to install after watching the videos at etrailer.com. I installed brakes on both wheels on my boat trailer along with new seals and they work great. I've only taken a test drive, but the new brakes really help.
Steven S.
3/23/2017
Very satisfied with these brakes. They grab a little when first coming out of the water, but that goes away after the first stop.
by: Lew A.06/02/2015
Bought a set of these and a master cylinder for my single axle boat trailer..and now I have surge brakes. Yea!
Products were of excellent quality and exactly as displayed and shipping was prompt and the order process was a breeze!
Great company to do business with and the prices are excellent too!
Lew A.
6/1/2016
It has been a year and I still have great surge brakes..thank you very much!
by: Dean H.07/16/2014
Replaced original Dico brakes on trailer for 20' Maxxum without a hitch.
Buying the complete assembly is the way to go. Thanks etrailer.com!
Dean H.
7/17/2015
Brake rebuild has been a success over the long term.
by: Joel_CA08/08/2013
This brake assembly bolted right up and installed in minutes. Much faster and easier (and more cost efficient) than replacing just the failed parts of the original brakes (frozen wheel cylinder and shoes). The "free backing" feature doesnt seem to work all that well. I can feel a heavy amount of drag in reverse and leave tire marks from my trailer all the way up my sloped driveway unless I manually engage the reverse lockout on my actuator. I purposely bought this set so I wouldnt have to do that anymore.
by: Jon B07/20/2014
I spent a lot of time trying to clean the grease and dirt off my old ones to try to salvage them after replacing bearings and leaky seals that made a big mess out of my brakes. And, removed worn out shoes by messing with all the springs, before I found these, the whole assembly put together already, and galvanized. I bought four and simply installed them with four bolts. Also added a new actuator, tested the brakes, and they work great. Installed on a 1991 Tracker trailer. Like new again, and saved hundreds doing it myself. Wished I knew about this product sooner.
by: Morgan05/13/2019
Product fit my trailer perfectly. Was exactly the same as the assembly it replaced, just new and working. The pads on my old assembly were worn down, and the wheel cylinders were seized.
One thing that would be nice is some advice on how to bleed this hitch actuated trailer brakes. It's not an easy job, being that a great deal of force is required at the hitch in order to push the fluid through. (Being that it is meant to be actuated by the trailer's weight.
I used a piece of lumber propped on the pavement to leverage the hitch in to push the fluid through. Wondering if there might be a better way to do it . . .
Great product, fast delivery!
by: Nav gill05/15/2017
This part fit 100%. I got the best price from etrailer and I'm so happy that I could install it easily. My brake cylinder was leaking and this was the best way to go to replace the whole unit. I will be ordering the other side this year. Thanks etrailer. PS I'm from Canada and shipping wasn't a problem. I live in Vancouver aND ordered it to blaine aND it arrived really fast. Thanks again
by: Terry H07/09/2016
I used to have to stop before going down a hill to disengage my brakes so I could stop barely, then back up hill into my driveway. These brakes work great. I would recommend them and also I would recommend the hub and drum assembly. By the time I put new bearings and races in and turned the drums I wish that I would have bought new ones for my trailer that sees a lot of saltwater.
by: jbs06/13/2017
The hydraulic drum brakes with backer plates, I ordered came on time and fit great. I also installed new bearings and they fit good too. I will use them again when I need more parts.
by: Robert06/23/2020
Excellent quality. Installed easy with all 4 brakes assembly. Confidentiality!!!!
Robert
6/24/2021
No issues
by: Mike H.10/25/2016
Hydraulic trailer drum brakes. Received within a few days. Easy to install, not that complicated. Needed a second person to help bleed the brakes.
by: Robert07/30/2018
I was satisfied with the drums and brake units supplied by Etrailer. The wheel bearings were junk so I trashed them, and repacked the Timkin's that were already on the trailer.
I was pleased with the support I received from Etrailer ensuring the correct items were ordered to avoid returns.
by: Richard B07/29/2017
Perfect replacement for my old rusted boat trailer brakes. Assembly was straight forward. Brakes release well in reverse. All I could ask for.
by: Gary B.05/22/2016
I am so glad I found the etrailer website. The product fit perfectly, was simple to mount, the shoes were nearly adjusted out of the box and the price is too good to be true. I would recommend this to anyone.
by: Scott07/19/2015
These brakes are a breeze to install! I put them on my boat trailer which I launch in salt water, so it would have been nice to have a washout port (the reason I didn't give them an excellent rating). The price is good and the install is easy, so if I get a couple years out of them I'll be happy.
by: Mark R.06/30/2014
Received the brake assembly, installed it with no problems. Easiest brake job I have ever done, 4 bolts attach the brake line, adjust the brakes and you are done. I had a question on the flange bolt spacing. The 4 on 4" is a diagonal measurement. If you look at the picture of the brake assembly above the spacing of top left to top right is 2 7/8", diagonal top left to bottom right is 4" This fit my application perfectly.
by: david d03/15/2017
This product was reasonably price so I purchased it instead of piece parting it. It made the job much simpler. The only thing we have to do at the one year mark is to check the adjustment I would recommend this product to anyone thinking of rebuilding their trailer brakes.
by: Dick W.03/20/2016
Extremely fast delivery and very well made. Harder to install than the video indicated but not due to the quality of the product. The old brakes where install with Blue Loctite and required heating with torch to get them off using an impact wrench. After getting the old brakes off, installation was a breeze! High recommend this product.
by: Ron B. II12/14/2016
these replacments for my boat trailer were and are very good and have held up to my standards for me , nice and easy replacment !
25
148
Show More Reviews
See what our Experts say about this Demco Accessories and Parts
- Trailer Brake Recommendation for LoadRite Boat Trailer with 10 x 2-1/4 Inch WheelsThere are many possible reasons why your brake could have failed. It is hard to specify why yours may have failed. I recommend checking the reverse lock-out on your actuator to make sure it is working properly. Backing up with your trailer connected if your reverse lock-out isn't functioning could be why your brakes failed. If the lock-out isn't working, you could use the Demco Hydraulic Drum Brake Assembly - Free Backing # 40716, # 40715. These brakes would allow you to back up with your...
view full answer... - Brake Assembly for Use with Dexter Galvanized Trailer Hub and Drum # 8-247-50UC3Since your boat and trailer will be used in salt water a galvanized hub/drum is a good idea to give you some corrosion protection. With this hub you can use Demco Galvanized Free Backing Hydraulic Drum Brake Assembly # 40716 (left) and # 40715 (right). These are suitable for a 3500-lb axle and a 4-on-4-inch brake flange mounting pattern. I have linked an installation video for your reference. Even when using galvanized components, it is a good idea to rinse the trailer with fresh water...
view full answer... - How to Pick Out Replacement Hubs for a 1980 Shore Landr TrailerIn order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out. Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub...
view full answer...
- Does Demco Hydraulic Brake Assembly # 40715 Include the Brake DrumThe # 40715 Demco Rt. Hand 10 inch brake assembly is sold separately from the brake drum. If you'd care to reply with the inner and outer bearing reference numbers, along with the axle capacity and the wheel bolt pattern (see help article about how to determine this), I'd be happy to make some recommendations for you.
view full answer... - Trailer Brake Assembly Replacement Recommendation after Water ContaminationWe sell several wheel cylinders that you could use as replacements. Most likely that is all you would need to replace on your assemblies. You will want to check out the link I attached to see all of the ones we carry so that you can pick out the correct one. Or, it would be a good time to replace your current brake assemblies. To pick out the correct brake assemblies for your trailer you need to know a few things. You will want to measure the inner diameter of your hub/drums and the...
view full answer... - Can One Set of Hydraulic Drum Brakes Provide Enough Stopping Power for a Tandem Axle Boat TrailerIf your boat trailer came equipped with hydraulic drum brakes on both axles, it is best to keep both sets in working order, but if this is the route you prefer you'll want to put the new brakes on the rear axle where most of the boat's weight will be concentrated. I linked our main page for hydraulic drum brakes. You can use the filters on the page to select your overall axle capacity (both of your current axles' capacities added together) to see if we have brakes of the appropriate rating,...
view full answer... - Can Free-Backing Hydraulic Brakes Be Installed as Replacements on Boat TrailerYou absolutely can install free-backing hydraulic drum brakes on your trailer. These will make reversing your trailer for loading and unloading a much easier process. You will want to make certain that you match not only the brake size but also the axle weight rating and mounting pattern. We offer free-backing brakes from Demco for 3500-lb axles, parts # 40716 and # 40715, as well as the Titan units you referenced, parts # T4071600 and # T4071500.
view full answer... - How to Pick Out Surge Brake Hub/Drums and Assemblies for TrailerSo the easiest way to replace the components you mentioned would be with new hub/drums and new brake assemblies. To do that I'd need to know a few key pieces of info. The bolt pattern on the hub where the wheels attach, the bearing numbers out of the hub or the dimensions where they ride on the spindle. With that info I can get you the correct hub drum and from there know which brake assemblies you'll need. I attached a link to this page that details this process as well.
view full answer...
- Does Brake Assembly part # 40715 Come with Lock Nuts and WashersThe brake assembly part # 40715 does not come with lock nuts and washers. For that we have the part # 6-17 for the nut and part # 5-8 for the lock washer.
view full answer... - Replacement 10-Inch Hydraulic Brakes, Seals, Bearings for Boat Trailer With 6000-lb AxleThank you for providing specific capacities and dimensions for the replacement hydraulic brakes you need for your boat trailer. All of the hydraulic drum brakes we offer for 6000-lb rated axles are the 12 x 2-inch size. Our 10-inch hydraulic drum brake assemblies top out at a 3500-lb axle rating; please see the link provided. Demco # 40716 and # 40715 are examples. It is possible that your trailer manufacturer used a 6000-lb-rated axle with other components that are of lower capacity....
view full answer...
- What Braking Assemblies do I Need for Karavan Tandem AxleIf the bolt pattern on your axles, for the backing plate, is 2-3/4 inch on center , both of these braking assemblies would fit your 10 inch x 2-1/4 inch trailer brake assemblies. Part # 40715 and # 40716 are what I would recommend. These are the left and right hand side brake assemblies. Since you are going to be backing up an incline you want the least amount of reverse braking which is why I recommend these over the other. The shoes for these assemblies are part # BP04-126. The part...
view full answer... - Comparing Single Serve and Free Backing Functions on a Demco Free Backing Brake AssemblySingle serve refers to the wheel cylinder in a hydraulic drum brake assembly. It is an entirely separate component from the free backing option. A single serve, or uni-servo, wheel cylinder uses a single plunger to push the brake shoes against the drum. When you are backing up, the wheel cylinder and the brake shoe springs work against each other. The dual spring and fall-away shoe design of the Demco free backing brakes allows the shoe to overcome the pressure from the wheel cylinder...
view full answer... - What Bearings Should Be Used with a Dexter HubAs long as you find the correct bearings for the hub you should be fine. If you wanted to email me back with what Dexter hub/drums you bought I could help you pick out the correct parts. Or if you search the part number and find the product page the bearing numbers will be listed in the description.
view full answer... - How to Select New Brakes and Hubs for a Load Rite Boat TrailerThe 2,600 lb axles on your Load Rite boat trailer are likely de-rated 3,500 lb axles, so you should have no problem using 3,500 lb brakes and drums. The important factor to consider in this situation is that the brakes match the brake mounting flange on your axle and that the hubs/drums match your spindles. Almost all 3,500 lb brake assemblies require a 4-bolt brake mounting flange. The bolt holes on the brake mounting flange should be 2-7/8 inches apart on center. If your brake mounting...
view full answer...
- Recommended Brakes For Boat Trailer With Surge Coupler And 3500-Lb AxleThere are quite a few brake assemblies that will work with your EZloader trailer. It helps when you give the information you provided when choosing a system. I recommend using free-backing brakes like the Demco Brakes. For the left hand(driver side) you would need part # 40716 and for the right hand I recommend part # 40715. These do not engage when backing up so they are great for a boat trailer. These brakes do have a 4-bolt brake flange.
view full answer... - Replacement Drum Brakes for 2000 Maxum Boat TrailerWe carry both hydraulic and electric drum brakes for trailers in a range of sizes and for various axle weight ratings. We can help you select new brakes. The things you'll need to confirm are the axle's weight rating, the drum size, the type of brakes (electric or hydraulic) and the mounting bolt pattern of the brake flange. Axle capacity is usually listed on a plate or sticker right on the axle itself. Drum size can be determined by pulling one of the hub/drum assemblies and measuring...
view full answer...
- Can Free-Backing Brakes Replace Non-Free-Backing Breaks on 2001 EZ Loader Boat TrailerYou can use free-backing brake assemblies on your trailer in place of the existing non-free-backing brakes. For your 2001 EZ Loader boat trailer I recommend the Demco Hydraulic Drum Brake Assemly, Free Backing, Galvanized, for 10 Inch Brakes # 40715 for the right- hand side and # 40716 for the left-hand side. The galvanized steel will resist rust, making these assemblies great for your boat trailer. I have attached an installation video of these brakes for you. Another great option is...
view full answer... - Mounting Drum Brakes to an EZ-Loader Trailer with 4-Bolt Brake Mounting FlangeIf you are wanting to install your brakes on your EZ-Loader trailer, you will need brake mounting flanges with a 4 bolt pattern that matches the bolt pattern of your brake assemblies. We do carry some brake mounting flanges, but we will need to know the diameter of your axle or spindle shaft to determine if we have a brake mounting flange that will fit your trailer. The brake mounting flanges will need to be welded on square, so we recommend having a qualified professional with trailer...
view full answer...
- Can Surge Coupler/Actuators Be Converted from Drum to Disc Brake OperationSurge couplers for drum and disk brakes use different master cylinders that operate at different pressures, lower for drums and higher for discs. It is possible to swap out the master cylinder in a surge coupler to convert it from one type of operation to the other. Depending on the number of brake assemblies, trailer length, etc, larger brake lines are sometimes also called for with disc systems. It sounds like you have free-backing drum brakes like # 40715 on the trailer now, which allow...
view full answer... - Replacement Hydraulic Drum Brakes for a 1999 Seadoo TrailerCheck the mounting pattern of the brakes you have now. The Demco brakes, # 40715, mount on a 4 bolt mounting flange with the holes 4 inches apart on center side to side. The surface of the drum where the pads tough is likely to be 2-1/4 inches, especially if you have 13 to 15 inch wheels. In the 10 inch hydraulic brakes you are pretty much limited to 10 x 2-1/4 so its a safe bet that these are correct. The matching left hand side brake is # 40716. If you need additional hardware use #...
view full answer... - Replacement Electric Trailer Brakes for Snowmobile Trailer To determine the correct replacement electric brakes you will need to know the weight capacity of your axle and then measure the inside diameter and width where the pads from the brakes touch. If your axles are 3500 lbs and you get 10 inches by 2-1/4 inches AND the brake mounting flange has a 4 bolt pattern then assembly # 23-469 for the right and # 23-468 for the left will fit. The best brake assemblies as far as resisting corrosion due to moisture are hydraulic brakes, which are used...
view full answer... - Free-Backing 12 x 2 Drum Brake Drags When Moving Forward on Karavan Boat TrailerThank you for providing the photo of the left-hand brake assembly on your boat trailer. The bolt that attaches your actual brake shoe to the shoe lever arm should be tight, but we do not have an actual torque specification. It is intended that the bolt provide a pivot point for movement between those two parts. After examining your photo and comparing it to all of the free-backing 12 x 2 brake assemblies we offer I noticed that one of the springs on your brake appears to be in an incorrect...
view full answer...
- How to Select Replacement Hydraulic Drum Brake Assembly for Calkins Boat TrailerYou can choose a correct replacement hydraulic drum brake by matching up a few characteristics to yours. You need to match up axle weight capacity (usually found on a sticker or plate on the axle), the drum diameter and width, and your brake mounting bolt pattern. You can click on the link provided to see our main page for hydraulic drum brakes. First, click on the axle rating, then your drum size. Most of our brake assemblies, such as Demco Hydraulic Free Backing 10 x 2-1/4-inch brake...
view full answer... - Determining If Surge Brake Actuator Has Lockout or If Brakes are Free-BackingThe only way to turn a surge brake actuator "off" is to engage a lockout on the actuator. Some actuators have manual lockouts, others have electric lockouts, and some have no way to lock out the actuator. Typically, free-backing brakes are used with actuators that have no lockout. As long as the trailer brakes engaging when your tow vehicle is stopping, the brakes are working correctly. I have attached photos showing a manual lockout and electric lockout to help you determine if your actuator...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Updated by:
Lindsey S
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ken
6/10/2023
A year later and brakes are still working well. Definitely pleased with this purchase.