Can Free-Backing Hydraulic Brakes Be Installed as Replacements on Boat Trailer
Question:
I have a 1997 Dorsey tandem axle boat trailer with Hydraulic surge Drum brakes on one axle, It has an Atwood coupler 83000 manual lockout reverse and I recently replaced the master cylinder and found that the wheel cylinders were leaking. I am now looking to replace the brake assemblies and I need to find out if Titan T4071600 and T4071500 Freebacking brakes are compatible? or do I need the regular non-freebacking versions T1878700 and T1878800? Thanks! p.s. the original brakes are 10inch x 2.25inch with a 4 on 4 bolt pattern.
asked by: Mitch C
Expert Reply:
You absolutely can install free-backing hydraulic drum brakes on your trailer. These will make reversing your trailer for loading and unloading a much easier process. You will want to make certain that you match not only the brake size but also the axle weight rating and mounting pattern.
We offer free-backing brakes from Demco for 3500-lb axles, parts # 40716 and # 40715, as well as the Titan units you referenced, parts # T4071600 and # T4071500.
Products Referenced in This Question
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Right Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Demco Hydraulic Drum Brake Assembly - Free Backing - Galvanized - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Demco
more information >
Dexter Free-Backing Hydraulic Trailer Brake Assembly - 10" - Right Hand - 3,750 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Dexter Free-Backing Hydraulic Trailer Brake Assembly - 10" - Left Hand - 3,750 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Free Backing
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Product Page this Question was Asked From
Dexter Uni-Servo Hydraulic Trailer Brake Assembly - 10" - Right Hand - 3,750 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: How To Determine Right and Left Side of Dexter Hydraulic Drum Brake Assemblies
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement Bearings and Seal for Dexter Hub 8-147
- Q&A: Replacement Hub for Older Dexter 8-245
- Q&A: Atwood 82453 Surge Brake Coupler Master Cylinder Replacement
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778